Jump to content

Recommended Posts

Posted

Здравствуте!

Возникла необходимость передачи трафика с зеркалированного порта с одной NEXUS 3064 на другую такую же. На обеих железках одинаковые прошивки 7.0(3)I7(6).

Создаю vlan:

sw2# conf t
sw2(config)# vlan 3
sw2(config-vlan)# remote-span
                               ^
% Invalid command at '^' marker.
sw2(config-vlan)# ?
  media     Media type of the VLAN
  name      Ascii name of the VLAN
  no        Negate a command or set its defaults
  shutdown  Shutdown VLAN switching
  state     Operational state of the VLAN
  end       Go to exec mode
  exit      Exit from command interpreter
  pop       Pop mode from stack or restore from name
  push      Push current mode to stack or save it under name
  where     Shows the cli context you are in

т.е. команды remote-span нет вообще.

Смотрел тут, тоже ничего не нашел.

Подскажите, куда копать дальше?

Posted

ММ. 

Hardware
  cisco Nexus3064 Chassis 
  NXOS image file is: bootflash:///nxos.7.0.3.I4.5.bin

 

sw(config)# vlan 10
sw(config-vlan)# ?
  media        Media type of the VLAN
  name         Ascii name of the VLAN
  no           Negate a command or set its defaults
  remote-span  Enable remote span VLAN
  shutdown     Shutdown VLAN switching
  state        Operational state of the VLAN
  end          Go to exec mode
  exit         Exit from command interpreter
  pop          Pop mode from stack or restore from name
  push         Push current mode to stack or save it under name
  where        Shows the cli context you are in
 

Posted
2 минуты назад, pin сказал:

А можно узнать,  какие features у вас включены?

sw1# show run | i feature
feature vrrp
feature tacacs+
feature ospf
feature pim
feature interface-vlan
feature lacp
feature lldp
feature bfd
 

Posted

Nexus_cvet-21(config-vlan)# ?
  media        Media type of the VLAN
  name         Ascii name of the VLAN
  no           Negate a command or set its defaults
  remote-span  Enable remote span VLAN
  shutdown     Shutdown VLAN switching
  state        Operational state of the VLAN
  end          Go to exec mode
  exit         Exit from command interpreter
  pop          Pop mode from stack or restore from name
  push         Push current mode to stack or save it under name
  where        Shows the cli context you are in

 

FEATURE LAN_ENTERPRISE_SERVICES_PKG cisco 1.0 permanent uncounted \
        VENDOR_STRING=<LIC_SOURCE>NEXUS_PRODUCTION</LIC_SOURCE><SKU>N3K-LAN1K9</SKU> \

 

Software
  BIOS: version 3.9.0
  NXOS: version 7.0(3)I5(1)
  BIOS compile time:  01/25/2016
  NXOS image file is: bootflash:///nxos.7.0.3.I5.1.bin
  NXOS compile time:  10/29/2016 6:00:00 [10/29/2016 13:46:41]

 

Nexus_cvet-21# show run | i feature
feature telnet
feature bgp
feature pim
feature msdp
feature interface-vlan
feature lacp
feature dhcp
feature lldp
Nexus_cvet-21#

 

Posted
В 11.02.2020 в 11:32, Avad0n сказал:

ММ. 

Hardware
  cisco Nexus3064 Chassis 
  NXOS image file is: bootflash:///nxos.7.0.3.I4.5.bin

 

sw(config)# vlan 10
sw(config-vlan)# ?
  media        Media type of the VLAN
  name         Ascii name of the VLAN
  no           Negate a command or set its defaults
  remote-span  Enable remote span VLAN
  shutdown     Shutdown VLAN switching
  state        Operational state of the VLAN
  end          Go to exec mode
  exit         Exit from command interpreter
  pop          Pop mode from stack or restore from name
  push         Push current mode to stack or save it under name
  where        Shows the cli context you are in
 

Это не означает поддержку rspan, вам в библиотеку.

Posted

как помнится, на нексусах есть и rspan, и erspan - включается что-то типа monitor session номер и дальше уже выбирается что нужно.

жаль, под рукой нет нексуса.

Posted
22 часа назад, kapydan сказал:

как помнится, на нексусах есть и rspan, и erspan - включается что-то типа monitor session номер и дальше уже выбирается что нужно.

жаль, под рукой нет нексуса.

Да, примерно так и делается - https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus3000/sw/system_mgmt/7_x/b_Cisco_Nexus_3000_Series_NX-OS_System_Management_Configuration_Guide_7x/b_Cisco_Nexus_3000_Series_NX-OS_System_Management_Configuration_Guide_7x_chapter_010010.html

 

  • 3 weeks later...
  • 1 year later...
Posted
В 11.02.2020 в 08:06, pin сказал:

Возникла необходимость передачи трафика с зеркалированного порта с одной NEXUS 3064 на другую такую же

Задался тем же вопросом.

Между двумя нексусами один физический линк.  Switchport mode trunk. Естественно через линк кроме зеркалированного нужно передавать и другой трафик.

 

Как я понимаю на первом нексусе можно SPAN DESTINATION порт через петельку соединить с портом, на котором прописано switchport access vlan xx

На этом vlan выключить mac learning и добавить его в транковый порт между нексусами.

 

Так получается аналог RSPAN

 

Верно?

  • 9 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...
На сайте используются файлы cookie и сервисы аналитики для корректной работы форума и улучшения качества обслуживания. Продолжая использовать сайт, вы соглашаетесь с использованием файлов cookie и с Политикой конфиденциальности.