dexdex Posted March 22, 2018 Posted March 22, 2018 Ищем гуру по настройке GPON Huawei MA5603T. Представляем для себя следующую архитектуру: 1. IPoE Vlan per user (DHCP Option 82) 2. OLT Huawei MA5603T в качестве браса, его задача смаршрутизировать трафик клиентов на бордер и раздать IPTV мультикаст. 3. Шейпер средствами OLTа (либо DBA профилями, либо QoS). 4. После OLT-а стоит бордер, который делает NAT, и выбирает в какой канал пойдет трафик. 5. Адреса раздает биллинг, он же рулит OLT-ом. 6. IPTV мультикаст отдаем юзерам через один натив влан вместе с интернет трафиком. Используем однопортовые GPON ONU (EchoLife HG8310M) Вставить ник Quote
dexdex Posted May 28, 2018 Author Posted May 28, 2018 (edited) Вышеуказанное реализовали, кроме пункта 3 - шейпер, его получилось сделать на половину. А именно, можем резать входящий и исходящий интернет трафик, но нужно еще НЕ резать локальный трафик (либо резать под другую скорость). В общем требуется гуру по Huawei MA5603T, и лучше даже на ПЛАТНОЙ ОСНОВЕ, ответы нужны срочно (пишите в личку). И вообще по нюансам данного ОЛТа вопросы возникают периодически, нужно их оперативное решение. Конфиги если кому интересно можем выложить. Edited May 28, 2018 by dexdex Вставить ник Quote
satboy Posted May 28, 2018 Posted May 28, 2018 Если у вас стоит бордер с натом - что мешает шейпить на нем?? Вставить ник Quote
dexdex Posted May 29, 2018 Author Posted May 29, 2018 Бордер с натом есть, но необходимо реализовать именно на ОЛТе. [Saving user: root] [Saving time: 2018-05-11 15:10:16+08:00] [MA5600V800R015: 5800] # [sysmode] <sysmode> switch adsl mode to rfc2662 vdsl mode to tr129 xpon mode switch-to profile-mode voice-spec set vag-num 8 protocol support h248 system ex-mode backup system workscene msan router mode basic # [global-config] <global-config> traffic table ip index 7 name "IPTV" cir off color-mode color-blind priority 4 priority-policy local-setting traffic table ip index 8 name "1M" cir 1024 cbs 34768 pir 1024 pbs 34768 color-mode color-blind priority 1 priority-policy tag-in-package traffic table ip index 9 name "2M" cir 2048 cbs 67536 pir 2048 pbs 67536 color-mode color-blind priority 1 priority-policy tag-in-package traffic table ip index 10 name "3M" cir 3072 cbs 100304 pir 3072 pbs 100304 color-mode color-blind priority 1 priority-policy tag-in-package traffic table ip index 20 name "25M" cir 25600 cbs 821200 pir 25600 pbs 821200 color-mode color-blind priority 1 priority-policy tag-in-package traffic table ip index 24 name "45M" cir 46080 cbs 1476560 pir 46080 pbs 1476560 color-mode color-blind priority 1 priority-policy tag-in-package traffic table ip index 35 name "100M" cir 102400 cbs 3278800 pir 102400 pbs 3278800 color-mode color-blind priority 1 priority-policy tag-in-package traffic table ip index 45 name "150M" cir 153600 cbs 4917200 pir 153600 pbs 4917200 color-mode color-blind priority 1 priority-policy tag-in-package traffic table ip index 55 name "200M" cir 204800 cbs 6555600 pir 204800 pbs 6555600 color-mode color-blind priority 1 priority-policy tag-in-package dba-profile add profile-id 10 profile-name "UNLIM_1024000M" type3 assure 32768 max 1024000 ont-srvprofile gpon profile-id 1 profile-name "ONT_STD1001" ont-port eth 1 igmp-forward translation 139 multicast-forward untag multicast mode igmp-snooping port vlan eth 1 translation 139 user-vlan 139 port vlan eth 1 translation 1001 user-vlan 1001 commit ont-lineprofile gpon profile-id 0 profile-name "line-profile_default_0" tcont 0 dba-profile-id 2 tcont 1 dba-profile-id 0 commit quit ont-lineprofile gpon profile-id 1 profile-name "ONT_STD_P1001" tcont 4 dba-profile-id 10 gem add 20 eth tcont 4 gem add 30 eth tcont 4 gem mapping 20 1 vlan 1001 gem mapping 30 1 vlan 139 commit quit # [device-config] <device-config> board add 0/5 H805GPFD board add 0/8 H801X2CS board add 0/9 H801X2CS board add standby # [public-config] <public-config> snmp-agent local-engineid 800007DB03643E8CAC888271 # [vlan-config] <vlan-config> vlan 9 smart vlan 11 smart vlan 14 smart vlan 139 smart vlan 1001 to 4078 smart vlan desc 9 description "Uplink" vlan desc 11 description "Billing" vlan desc 14 description "LocalAreaNetwork" vlan desc 139 description "IPTV" vlan desc 1001 description "UserVlan1001" port vlan 9 0/8 0 port vlan 11 0/7 0 port vlan 14 0/7 1 port vlan 139 0/8 0 # [scu] <scu-0/7> interface scu 0/7 mdi 0 normal mdi 1 normal native-vlan 0 vlan 11 native-vlan 1 vlan 14 # [gpon] <gpon-0/5> interface gpon 0/5 port 0 ont-auto-find enable port 1 ont-auto-find enable port 2 ont-auto-find enable port 3 ont-auto-find enable port 4 ont-auto-find enable port 5 ont-auto-find enable port 6 ont-auto-find enable port 7 ont-auto-find enable port 8 ont-auto-find enable port 9 ont-auto-find enable port 10 ont-auto-find enable port 11 ont-auto-find enable port 12 ont-auto-find enable port 13 ont-auto-find enable port 14 ont-auto-find enable port 15 ont-auto-find enable ont add 14 0 sn-auth "%KP`):/PA\%J@C@..9QR%51!!%" omci ont-lineprofile-id 1 ont-srvprofile-id 1 desc "Office-1001" ont port native-vlan 14 0 eth 1 vlan 1001 priority 0 # [giu] <giu-0/8> interface giu 0/8 native-vlan 0 vlan 9 # [emu-config] <emu-config> emu add 0 fan 0 1 "H801FCBI" # [bbs-config] <bbs-config> service-port 0 vlan 1001 gpon 0/5/14 ont 0 gemport 20 multi-service user-vlan 1001 tag-transform translate inbound traffic-table index 9 outbound traffic-table index 9 service-port 4000 vlan 139 gpon 0/5/14 ont 0 gemport 30 multi-service user-vlan 139 tag-transform translate inbound traffic-table index 7 outbound traffic-table index 7 # [abs-config] <abs-config> config ring check enable ring check resume-interval 10 raio-format dhcp-option82 cid xpon "vlanid" raio-format dhcp-option82 rid xpon "slot/port" raio-mode user-defined dhcp-option82 # [btv-config] <btv-config> btv igmp user add service-port 4000 no-auth multicast-vlan 139 igmp version v2 igmp match mode disable igmp match group ip 233.166.172.1 to-ip 239.255.2.255 igmp multicast-vlan member service-port-list 4000 igmp mode snooping igmp uplink-port 0/8/0 # [security-config] <security-config> security anti-dos enable security anti-macduplicate enable # [dhcp-config] <dhcp-config> dhcp mode layer-3 standard dhcp proxy enable dhcp option82 enable # [config] <config> multicast routing-enable security anti-ipattack enable security anti-icmpattack enable mpls label start 8192 # [dhcp] <dhcp> dhcp-server 1 ip 25.25.25.30 dhcp relay-interface src-ip send dhcp relay-interface relay-agent send # [prevlanif] <prevlanif> interface vlanif9 interface vlanif11 interface vlanif14 interface vlanif139 interface vlanif1001 # [vlanif] <vlanif9> interface vlanif9 ip address 10.200.200.200 255.255.255.0 # <vlanif11> interface vlanif11 ip address 25.25.25.3 255.255.255.0 # <vlanif14> interface vlanif14 ip address 10.80.92.253 255.255.255.0 # <vlanif139> interface vlanif139 igmp enable # <vlanif1001> interface vlanif1001 ip address 10.200.255.1 255.255.255.240 dhcp-server 1 # [meth] <meth0> interface meth0 ip address 10.11.104.2 255.255.255.0 # [null] <null0> interface null0 # [aaa] <aaa> aaa authentication-scheme "default" # authorization-scheme "default" # accounting-scheme "default" # domain "default" # [post-system] <post-system> ip route-static 0.0.0.0 0.0.0.0 10.200.200.1 undo ssh server compatible_ssh1x arp proxy enable # return Вставить ник Quote
dexdex Posted May 29, 2018 Author Posted May 29, 2018 C IPTV по Multicast проблем нет, скорость не режется, т.к. ограничения нет. С релеем тоже нет проблем. Необходимо указать, что до 14 влана нет ограничения по скорости, либо ограничить 100 м/бит. Вставить ник Quote
zstas Posted May 29, 2018 Posted May 29, 2018 лучше не заморачиваться с отдельной нарезкой "локального трафика". это никому не нужно, сейчас не 2000 год. Вставить ник Quote
alexaaa Posted May 29, 2018 Posted May 29, 2018 вы сами навешали политику скорости для IPTV service-port 4000 vlan 139 gpon 0/5/14 ont 0 gemport 30 multi-service user-vlan 139 tag-transform translate inbound traffic-table index 7 outbound traffic-table index 7 попробуйте навешать другую политику на 100 мегабит traffic table ip index 35 name "100M" cir 102400 cbs 3278800 pir 102400 pbs 3278800 color-mode color-blind priority 1 priority-policy tag-in-package либо вообще не навешивайте политику делается так service-port 4000 vlan 139 gpon 0/5/14 ont 0 gemport 30 multi-service user-vlan 139 tag-transform translate Вставить ник Quote
dexdex Posted May 29, 2018 Author Posted May 29, 2018 (edited) VLAN 139 для мультикаста и им управляет сам ОЛТ. С ним проблем нет. И ограничения по скорости тоже нет. Необходимо указать, что до 14 влана нет ограничения по скорости, либо ограничить 100 м/бит. Это так сказать локальная сеть провайдера. В ней есть некоторые ресурсы до которых не нужно ограничивать скорость, либо немного ограничить. Также через этот влан вещается юникаст и он тоже режеться. Edited May 29, 2018 by dexdex Вставить ник Quote
alexaaa Posted May 29, 2018 Posted May 29, 2018 (edited) если у вас однопортовые ONU тогда вам надо загнать сервисы с 14 влана в 1001 влан или в 9 влан варианта два маршрутизация и физически Edited May 29, 2018 by alexaaa Вставить ник Quote
nolimit Posted June 2, 2018 Posted June 2, 2018 (edited) http://gponsolution.com/ индиец на английском правда говорит))))) но гура. Нам сильно помог в освоениии Huawei OLT. Помощь правда платная в адекватных долларах. А забыл еще есть группа в телеге. Кидайте номер кину админу. Там как раз по OLT разговоры Edited June 2, 2018 by nolimit Вставить ник Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.