Jump to content
Калькуляторы

Статус LAN в NanaStation NanoStation

Доброго времени суток!! Суть вопроса такова, можно ли как то по SSH посмотреть статус подключения кабеля к NanoStation (10 или 100, half или full) ?

Share this post


Link to post
Share on other sites

На M-серии можно так:

XM.v5.5.6# ethtool eth0
Settings for eth0:
       Supported ports: [ TP MII ]
       Supported link modes:   10baseT/Half 10baseT/Full
                               100baseT/Half 100baseT/Full
       Supports auto-negotiation: Yes
       Advertised link modes:  10baseT/Half 10baseT/Full
                               100baseT/Half 100baseT/Full
       Advertised auto-negotiation: Yes
       Speed: 100Mb/s
       Duplex: Full
       Port: MII
       PHYAD: 4
       Transceiver: internal
       Auto-negotiation: on
       Current message level: 0x00000000 (0)
       Link detected: yes

Share this post


Link to post
Share on other sites

B_TpaHce Спасибо, а какие еще есть у Вас команды??

есть к примеру проверка AIRmax, Stations, DHCP Leases (когда настроина роутером)?!

Edited by MaxZX2

Share this post


Link to post
Share on other sites

B_TpaHce

Спасибо за инфу

Вот кстати нашел (может кому то и пригодиться)

DHCP Leases - cat /tmp/dhcpd.leases

Stations - wlanconfig ath0 list station

CCQ - mca-status | grep ccq (единица измерения 1000 %)

Discovery - discover

 

все ни как не найду Align Antenna, Airmax Quality, Airmax Capacity

Share this post


Link to post
Share on other sites

B_TpaHce Как раз ее пробовал, но она что то не работает на Station, в АР показывает Airmax Quality и Airmax Capacity но они отличаются от графического интерфейса на 20( к примеру на графике 50%,а через SSH по 70%)

Share this post


Link to post
Share on other sites

B_TpaHce Как раз ее пробовал, но она что то не работает на Station, в АР показывает Airmax Quality и Airmax Capacity но они отличаются от графического интерфейса на 20( к примеру на графике 50%,а через SSH по 70%)

Может усредняет по всем клиентам в вебе, а по ссш показывает по отдельности на каждого?

Share this post


Link to post
Share on other sites

Может усредняет по всем клиентам в вебе, а по ссш показывает по отдельности на каждого?

Кстати возможно, сегодня тестировал эту функцию на Rocket M2(активных подключений 5), подключался к нему через микротик 750 по SSH ввожу:

1) wstalist показывает всю информация подключений 5 антенн

2) wstalist -i ath0 тот же самый результат

3) wstalist -i ath0 00:27:22:EC:70:8A -||-

4) wstalist -a ath0 00:27:22:EC:70:8A -||- хотелось бы вывести информацию только AP, что то не выходит...

 

wstalist -a ath0 00:27:22:EC:70:8A

[

{

"mac": "24:A4:3C: : :9C",

"name" : "ubnt",

"lastip" : "0.0.0.0",

"associd" : 1,

"aprepeater" : 0,

"tx" : 19.5,

"rx" : 52,

"signal" : -77,

"ccq" : 94,

"idle" : 0,

"uptime" : 85015,

"ack" : 38,

"distance" : 2400,

"txpower" : 16,

"noisefloor" : -87,

"airmax" : {

"priority" : 3,

"quality" : 21,

"beam" : 255,

"signal" : -89,

"capacity" : 28 },

"stats" : {

"rx_data" : 857478,

"rx_bytes" : 75583511,

"rx_pps" : 19,

"tx_data" : 1550860,

"tx_bytes" : 2199875073,

"tx_pps" : 46 },

"rates" : [ "MCS0", "MCS1", "MCS2", "MCS3", "MCS4", "MCS5", "MCS6

", "MCS7", "MCS8", "MCS9", "MCS10", "MCS11", "MCS12", "MCS13", "MCS14", "MCS15" ]

,

"signals" : [ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, -79, -80, 0, 0, 0

]

},

{

"mac": "DC:9F:DB: : :41",

"name" : "ubnt1",

"lastip" : "192.168.5.100",

"associd" : 2,

"aprepeater" : 0,

"tx" : 78,

"rx" : 117,

"signal" : -62,

"ccq" : 100,

"idle" : 4,

"uptime" : 85014,

"ack" : 23,

"distance" : 150,

"txpower" : 16,

"noisefloor" : -87,

"airmax" : {

"priority" : 3,

"quality" : 76,

"beam" : 255,

"signal" : -70,

"capacity" : 75 },

"stats" : {

"rx_data" : 19,

"rx_bytes" : 1019,

"rx_pps" : 0,

"tx_data" : 13,

"tx_bytes" : 801,

"tx_pps" : 0 },

"rates" : [ "MCS0", "MCS1", "MCS2", "MCS3", "MCS4", "MCS5", "MCS6

", "MCS7", "MCS8", "MCS9", "MCS10", "MCS11", "MCS12", "MCS13", "MCS14", "MCS15" ]

,

"signals" : [ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 ]

},

{

"mac": "DC:9F:DB: : :07",

"name" : "ubnt2",

"lastip" : "0.0.0.0",

"associd" : 3,

"aprepeater" : 0,

"tx" : 19.5,

"rx" : 78,

"signal" : -74,

"ccq" : 98,

"idle" : 0,

"uptime" : 85014,

"ack" : 38,

"distance" : 2400,

"txpower" : 16,

"noisefloor" : -87,

"airmax" : {

"priority" : 3,

"quality" : 31,

"beam" : 255,

"signal" : -88,

"capacity" : 32 },

"stats" : {

"rx_data" : 202667,

"rx_bytes" : 20268546,

"rx_pps" : 1,

"tx_data" : 171986,

"tx_bytes" : 151892600,

"tx_pps" : 1 },

"rates" : [ "MCS0", "MCS1", "MCS2", "MCS3", "MCS4", "MCS5", "MCS6

", "MCS7", "MCS8", "MCS9", "MCS10", "MCS11", "MCS12", "MCS13", "MCS14", "MCS15" ]

,

"signals" : [ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, -76, 0, 0, 0 ]

},

{

"mac": "24:A4:3C: : :31",

"name" : "ubnt3",

"lastip" : "0.0.0.0",

"associd" : 4,

"aprepeater" : 0,

"tx" : 52,

"rx" : 117,

"signal" : -69,

"ccq" : 95,

"idle" : 0,

"uptime" : 85014,

"ack" : 34,

"distance" : 1800,

"txpower" : 16,

"noisefloor" : -87,

"airmax" : {

"priority" : 3,

"quality" : 53,

"beam" : 255,

"signal" : -80,

"capacity" : 69 },

"stats" : {

"rx_data" : 145323,

"rx_bytes" : 16212140,

"rx_pps" : 1,

"tx_data" : 230465,

"tx_bytes" : 274085808,

"tx_pps" : 1 },

"rates" : [ "MCS0", "MCS1", "MCS2", "MCS3", "MCS4", "MCS5", "MCS6

", "MCS7", "MCS8", "MCS9", "MCS10", "MCS11", "MCS12", "MCS13", "MCS14", "MCS15" ]

,

"signals" : [ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, -70, -69

]

},

{

"mac": "DC:9F:DB: : :C6",

"name" : "ubnt4",

"lastip" : "0.0.0.0",

"associd" : 5,

"aprepeater" : 0,

"tx" : 26,

"rx" : 78,

"signal" : -70,

"ccq" : 93,

"idle" : 0,

"uptime" : 9693,

"ack" : 40,

"distance" : 2700,

"txpower" : 16,

"noisefloor" : -87,

"airmax" : {

"priority" : 3,

"quality" : 30,

"beam" : 255,

"signal" : -87,

"capacity" : 35 },

"stats" : {

"rx_data" : 95776,

"rx_bytes" : 13837272,

"rx_pps" : 3,

"tx_data" : 135405,

"tx_bytes" : 158715826,

"tx_pps" : 2 },

"rates" : [ "MCS0", "MCS1", "MCS2", "MCS3", "MCS4", "MCS5", "MCS6

", "MCS7", "MCS8", "MCS9", "MCS10", "MCS11", "MCS12", "MCS13", "MCS14", "MCS15" ]

,

"signals" : [ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, -74, 0, 0, 0 ]

}

]

 

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this