Jump to content
Калькуляторы

Cisco 1841 Проблема с загрузкой IOS

Доброе время суток, Уважаемые!

Имеется маршрутизатор Cisco 1841

Включаю вижу следующее:

 

System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright © 2006 by cisco Systems, Inc.

PLD version 0x10

GIO ASIC version 0x127

c1841 platform with 262144 Kbytes of main memory

Main memory is configured to 64 bit mode with parity disabled

 

 

Readonly ROMMON initialized

program load complete, entry point: 0x8000f000, size: 0xcb80

program load complete, entry point: 0x8000f000, size: 0xcb80

 

loadprog: error - not an executable ELF file

boot: cannot load "flash:"

 

System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright © 2006 by cisco Systems, Inc.

PLD version 0x10

GIO ASIC version 0x127

c1841 platform with 262144 Kbytes of main memory

Main memory is configured to 64 bit mode with parity disabled

 

 

Readonly ROMMON initialized

program load complete, entry point: 0x8000f000, size: 0xcb80

program load complete, entry point: 0x8000f000, size: 0xcb80

 

loadprog: error - not an executable ELF file

boot: cannot load "flash:"

 

System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright © 2006 by cisco Systems, Inc.

PLD version 0x10

GIO ASIC version 0x127

c1841 platform with 262144 Kbytes of main memory

Main memory is configured to 64 bit mode with parity disabled

 

 

Readonly ROMMON initialized

rommon 1 >

rommon 1 >

rommon 1 >

Пробовал "confreg 0x2102 - не помогает(((

Пробовал "reset" тоже самое(

Пробовал сделать следующее:

 

rommon 1 > IP_ADDRESS=10.0.0.2

rommon 2 > IP_SUBNET_MASK=255.255.255.252

rommon 3 > DEFAULT_GATEWAY=10.0.0.1

rommon 4 > TFTP_SERVER=10.0.0.1

rommon 5 > TFTP_FILE=c1841-advsecurityk9-mz.124-11.T2.bin

rommon 6 > tftpdnld

 

Пишет:

IP_ADDRESS: 10.0.0.2

IP_SUBNET_MASK: 255.255.255.252

DEFAULT_GATEWAY: 10.0.0.1

TFTP_SERVER: 10.0.0.1

TFTP_FILE: c1841-advsecurityk9-mz.124-11.T2.bin

TFTP_MACADDR: 00:1b:d4:f1:2b:e4

TFTP_VERBOSE: Progress

TFTP_RETRY_COUNT: 18

TFTP_TIMEOUT: 7200

TFTP_CHECKSUM: Yes

FE_PORT: 0

FE_SPEED_MODE: Auto Detect

 

Invoke this command for disaster recovery only.

WARNING: all existing data in all partitions on flash: will be lost!

Do you wish to continue? y/n: [n]: y

.

Receiving c1841-advsecurityk9-mz.124-11.T2.bin from 10.94.255.1

 

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

 

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

File reception completed.

Validating checksum.

Copying file c1841-advsecurityk9-mz.124-11.T2.bin to flash:.

program load complete, entry point: 0x8000f000, size: 0xcb80

 

Format: Drive communication & 1st Sector Write OK...

Writing Monlib sectors.

................................................................................

.....................

 

..

Monlib write complete

 

Format: All system sectors written. OK...

Format: Operation completed successfully.

 

Format of flash: complete

program load complete, entry point: 0x8000f000, size: 0xcb80

 

rommon 7 >

Пишет вроде все успешно прошло, делаю "reset" пишет следующее:

 

loadprog: bad file magic number: 0x0

boot: cannot load "flash:"

 

и снова "rommon"

 

Вроде флешку видит, но почему то загрузится не может( помогите разобраться в чем может быть проблема.

Очень рассчитываю на вашу помощь, заранее искренне благодарен!

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this