Jump to content
Калькуляторы

CISCO IGMP HELP !

Добрый день , ребят. Проблемы с igmp , не срабатывает обновление счетчика (expire)

вот что говорит дебаг:

Inconsistent setting of Query Interval on Vlan406 with 0.0.0.0 (60 != 125)

IGMP(0): Received v3 Query on Vlan406 from 0.0.0.0

%IGMP-3-QUERY_INT_MISMATCH: Received a non-matching query interval 125, from querier address 0.0.0.0

 

#sh run int vlan406

interface Vlan406

description ***

ip address X.X.X.X X.X.X.X

ip pim sparse-mode

end

sh ip igmp int vlan406

Vlan406 is up, line protocol is up

Internet address is X.X.X.X/24

IGMP is enabled on interface

Current IGMP host version is 2

Current IGMP router version is 2

IGMP query interval is 125 seconds

IGMP configured query interval is 60 seconds

IGMP querier timeout is 120 seconds

IGMP configured querier timeout is 120 seconds

IGMP max query response time is 10 seconds

Last member query count is 2

Last member query response interval is 1000 ms

Inbound IGMP access group is not set

IGMP activity: 8635 joins, 8590 leaves

Multicast routing is enabled on interface

Multicast TTL threshold is 0

Multicast designated router (DR) is X.X.X.X (this system)

IGMP querying router is 0.0.0.0

Multicast groups joined by this system (number of users):

224.0.1.40(1)

IGMP snooping is globally enabled

IGMP snooping CGMP-AutoDetect is globally enabled

IGMP snooping is enabled on this interface

IGMP snooping fast-leave (for v2) is disabled

IGMP snooping querier is disabled.

IGMP snooping explicit-tracking is enabled

IGMP snooping last member query response interval is 1000 ms

IGMP snooping report-suppression is enabled

откуда он берет значение 125 и причем здесь v3 query

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this