Перейти к содержимому
Калькуляторы

kostq

Новичок
  • Публикации

    3
  • Зарегистрирован

  • Посещение

О kostq

  • Звание
    Абитуриент
  1. Убил cisco sce 2020

    Butch3r , спасибо !
  2. Убил cisco sce 2020

    http://rusfolder.com/42899971 Благодарствую, барин! Ребят поделитесь пожалуйста файлом SEos , а то ссылка уже неактивна (
  3. Добрый день , ребят. Проблемы с igmp , не срабатывает обновление счетчика (expire) вот что говорит дебаг: Inconsistent setting of Query Interval on Vlan406 with 0.0.0.0 (60 != 125) IGMP(0): Received v3 Query on Vlan406 from 0.0.0.0 %IGMP-3-QUERY_INT_MISMATCH: Received a non-matching query interval 125, from querier address 0.0.0.0 #sh run int vlan406 interface Vlan406 description *** ip address X.X.X.X X.X.X.X ip pim sparse-mode end sh ip igmp int vlan406 Vlan406 is up, line protocol is up Internet address is X.X.X.X/24 IGMP is enabled on interface Current IGMP host version is 2 Current IGMP router version is 2 IGMP query interval is 125 seconds IGMP configured query interval is 60 seconds IGMP querier timeout is 120 seconds IGMP configured querier timeout is 120 seconds IGMP max query response time is 10 seconds Last member query count is 2 Last member query response interval is 1000 ms Inbound IGMP access group is not set IGMP activity: 8635 joins, 8590 leaves Multicast routing is enabled on interface Multicast TTL threshold is 0 Multicast designated router (DR) is X.X.X.X (this system) IGMP querying router is 0.0.0.0 Multicast groups joined by this system (number of users): 224.0.1.40(1) IGMP snooping is globally enabled IGMP snooping CGMP-AutoDetect is globally enabled IGMP snooping is enabled on this interface IGMP snooping fast-leave (for v2) is disabled IGMP snooping querier is disabled. IGMP snooping explicit-tracking is enabled IGMP snooping last member query response interval is 1000 ms IGMP snooping report-suppression is enabled откуда он берет значение 125 и причем здесь v3 query