Unicast TV

[Unicast TV]

udpxy не катит. relaying на FreeBSD рулит отлично! сто каналов - даже мало для него.

а где можно качнуть relaying для linux проверить как она работает. и есть ли он вообще??

[getstream]

getstream a84

2 процесса по 5 кодированных каналов. Загрузка cpu 20 %

вешается всё по udp

видео нормально показывается а вот звук время от времени начинает потупливать!

можно этот как нибудь решить??

[getstream]

прочитал вроде все страници этой темы может в что то не вчитался конечно!

сталкнулся с такой проблемой

спутник ABS 75, карта skay star 2

поставил сакс с репозитория hg clone http://85.17.209.13:6100/sc

ключи беру с картшаринга вот конфиг

newcamd:CardServ5.com:10004:0/0652/ffff:blabla:blabla:0102030405060708091011121314

сакс подципляется всё норм

страка запуска

sasc-ng -j 0:1 --cam-budget --sid-allpid --sid-nocache --cam-dir /etc/camfiles

 

вешаю так

 

http {
port 8001;
     };
adapter 1 {
packet-buffer 50;
stat-interval 120;
budget-mode 0;

dvb-s {
#lnb-sharing yes;
lnb {
lof1 9750000;
lof2 10600000;
slof 11700000;
    };

transponder {
            frequency 12670000;
            polarisation v;
            symbol-rate 22000000;
            };
        };

stream {
name "Eurosport International";
input {
pnr 1000;
};
output-udp { remote-address 230.0.0.3;
remote-port 1234;
sap{ scope global;
ttl 4;
# playgroup ”TNT”
};
};
};

stream {
name "Eurosport 2";
input {
pnr 1100;
};
output-udp { remote-address 230.0.0.2;
remote-port 1234;
sap{ scope global;
ttl 4;
# playgroup ”TNT”
};
};
};

};

 

2 канала дэкодируются и вещаются нормально!! ставлю 3 всё нам этом вешание зканачивается! вкакую сторону копать???

 

budget-mode

Set to "0" disabled the budget mode where getstream

request a seperate PID filter from the kernels filter. As

the filters are limited on the full featured cards

this is only a workaround and may work for 2-3 TV

Channels. Streaming a full transponder on a full featured

card is most certainly not possible.

 

в этом проблемма?? или я не так понял!!!

 

без budget-mode 0; он ключи вообще не берёт!!

 

 

лог сакса

 

 

 

Feb 16 11:49:40.564 CAM(core.ecm): 0.3: descriptor 06 34 e2 69

Feb 16 11:49:40.564 CAM(core.ecm): 0.3: found 0634(0000) (Irdeto2) id 0000 with ecm 269/80 (new)

Feb 16 11:49:40.564 CAM(core.ecm): 0.3: try system Cardclient (0652) id 0000 with ecm 26a (cached) (pri=-15)

Feb 16 11:49:40.641 CAM(cardclient.core): cc-loop

Feb 16 11:49:40.641 CAM(cardclient.core): now trying client Newcamd (CardServ5.com:10004)

Feb 16 11:49:40.680 CAM(cardclient.core): cc-loop

Feb 16 11:49:40.680 CAM(cardclient.core): now trying client Newcamd (CardServ5.com:10004)

Feb 16 11:49:40.692 CAM(cardclient.core): cc-loop

Feb 16 11:49:40.692 CAM(cardclient.core): now trying client Newcamd (CardServ5.com:10004)

Feb 16 11:49:40.849 CAM(core.au): 0: chain caid 0652 -> Irdeto2(-8) Irdeto(-10) Cardclient(-15) [1d4c-82/ff/00]

Feb 16 11:49:40.849 CAM(core.au): 0: chain caid 0634 -> Irdeto2(-8) Irdeto(-10) [1d4d-82/ff/00]

Feb 16 11:49:40.849 CAM(core.au): 0: chain caid 0500 -> Viaccess(-10) [0b25-8b/fe/07]

Feb 16 11:49:40.849 CAM(core.au): 0: starting chain 0652

Feb 16 11:49:48.781 CSA: Got command(1): E idx: 3 pid: 0 key: 1204...f9

Feb 16 11:49:49.307 CAM(core.ecm): 0.1: CA descriptors for SID 1100 (len=36)

Feb 16 11:49:49.307 CAM(core.ecm): 0.1: descriptor 06 52 e4 52

Feb 16 11:49:49.307 CAM(core.ecm): 0.1: found 0652(0000) (Irdeto2) id 0000 with ecm 452/80 (already present)

Feb 16 11:49:49.307 CAM(core.ecm): 0.1: descriptor 06 34 e4 51

Feb 16 11:49:49.307 CAM(core.ecm): 0.1: found 0634(0000) (Irdeto2) id 0000 with ecm 451/80 (already present)

Feb 16 11:49:49.307 CAM(core.ecm): 0.1: descriptor 06 52 e4 52

Feb 16 11:49:49.308 CAM(core.ecm): 0.1: found 0652(0000) (Irdeto2) id 0000 with ecm 452/80 (already present)

Feb 16 11:49:49.308 CAM(core.ecm): 0.1: descriptor 06 34 e4 51

Feb 16 11:49:49.308 CAM(core.ecm): 0.1: found 0634(0000) (Irdeto2) id 0000 with ecm 451/80 (already present)

Feb 16 11:49:49.308 CAM(core.ecm): 0.1: descriptor 06 52 e4 52

Feb 16 11:49:49.308 CAM(core.ecm): 0.1: found 0652(0000) (Irdeto2) id 0000 with ecm 452/80 (already present)

Feb 16 11:49:49.308 CAM(core.ecm): 0.1: descriptor 06 34 e4 51

Feb 16 11:49:49.308 CAM(core.ecm): 0.1: found 0634(0000) (Irdeto2) id 0000 with ecm 451/80 (already present)

Feb 16 11:49:49.308 CAM(core.ecm): 0.1: try system Cardclient (0652) id 0000 with ecm 452 (cached) (pri=-15)

 

eb 16 11:49:49.308 CAM(core.ecm): 0.1: found 0634(0000) (Irdeto2) id 0000 with ecm 451/80 (already present)

Feb 16 11:49:49.308 CAM(core.ecm): 0.1: try system Cardclient (0652) id 0000 with ecm 452 (cached) (pri=-15)

Called cSascDvbDevice::SetCaDescr

Feb 16 11:49:54.310 CSA: Got command(1): E idx: 2 pid: 0 key: fcbf...61

Feb 16 11:49:56.308 CAM(cardclient.core): cc-loop

Feb 16 11:49:56.308 CAM(cardclient.core): now trying client Newcamd (CardServ5.com:10004)

Feb 16 11:49:57.399 CAM(cardclient.ecm): Newcamd: card was not able to decode the channel

Feb 16 11:49:57.399 CAM(cardclient.core): client Newcamd (CardServ5.com:10004) ECM failed (1090 ms)

Feb 16 11:49:57.399 CAM(cardclient.core): cc-loop

Feb 16 11:49:57.399 CAM(cardclient.core): now trying client Newcamd (CardServ5.com:10004)

Called cSascDvbDevice::SetCaDescr

Feb 16 11:49:57.569 CSA: Got command(1): E idx: 1 pid: 0 key: 1209...f2

Called cSascDvbDevice::SetCaDescr

Feb 16 11:49:57.569 CSA: Got command(1): O idx: 1 pid: 0 key: 999b...d2

Feb 16 11:49:57.569 CAM(core.ecm): 0.1: correct key found

Called cSascDvbDevice::SetCaDescr

Feb 16 11:49:58.764 CSA: Got command(1): O idx: 3 pid: 0 key: 0b07...a7

Called cSascDvbDevice::SetCaDescr

Feb 16 11:50:04.300 CSA: Got command(1): O idx: 2 pid: 0 key: e187...f9

Called cSascDvbDevice::SetCaDescr

Feb 16 11:50:06.533 CSA: Got command(1): E idx: 1 pid: 0 key: 9886...48

Called cSascDvbDevice::SetCaDescr

Feb 16 11:50:38.702 CSA: Got command(1): O idx: 3 pid: 0 key: 2925...56

Feb 16 11:50:40.600 CAM(core.auStats): EMM packet load average (1/4/10min) 31 7 3 pks/s