Перейти к содержимому
Калькуляторы

blowfish

Пользователи
  • Публикации

    9
  • Зарегистрирован

  • Посещение

О blowfish

  • Звание
    Абитуриент
  1. С dhcp snooping'ом могут возникать проблемы вроде такой: http://forum.nag.ru/forum/index.php?showtopic=71157&st=0&p=658601entry658601 Или уже придумали универсальное лекарство?
  2. А количественная характеристика у "много" pps есть?
  3. Хотелось бы выбрать процессор исходя из соотношения цена/производительность с расчётом на расширение производительности добавлением аналогичных серверов.
  4. Добрый день. Посоветуйте процессор для маршрутизатора с шейпером, натом и bgp оптимальный на данный момент по соотношению цена/производительность. Подходят ли на эту роль новые процессоры intel xeon 3600 series?
  5. Да, теперь в vlan3 всё работает. Можно ли сделать аналогично на bvi интерфейсе? По аналогии не прокатывает, видно только 224.200.200.1 ( ip igmp join-group 224.200.200.1 ). ! ip multicast-routing ! interface FastEthernet0 switchport access vlan 1 ! ! interface FastEthernet4 ip address 10.1.1.2 255.255.255.0 ip pim dense-mode ip nat outside ip virtual-reassembly ! ! interface Vlan1 no ip address ip virtual-reassembly bridge-group 1 ! ! interface BVI1 ip address 192.168.0.1 255.255.255.0 ip pim dense-mode ip nat inside ip virtual-reassembly ip igmp helper-address 10.1.1.1 ip igmp join-group 224.200.200.1 !
  6. Не помогает. Мне кажется мультикаст не идёт из за того что запрос приходить от адреса за натом и этой сети нет в таблице маршрутизации во внешней сети. Нужно чтобы cisco 871 выступал в качеcтве прокси, посылая запросы от своего имени (адреса).
  7. Имеется Cisco 871W в качестве роутера с wifi. Cisco IOS Software, C870 Software (C870-ADVIPSERVICESK9-M), Version 12.4(15)T3, RELEASE SOFTWARE (fc1) Необходима чтобы компы за маршрутизатором могли смотреть телик. С таким конфигом работают только те группы на которые подписан сам cisco 871 (вероятно потому что вышестоящие маршрутизаторы ничего не знают о сети 192.168.2.0/24 за натом) fa4 - wan vlan3 - lan ! ip multicast-routing ! interface FastEthernet0 switchport access vlan 3 ! ! interface FastEthernet4 ip address 10.1.1.2 255.255.255.0 ip pim sparse-mode ip nat outside ip virtual-reassembly ip igmp join-group 224.2.127.254 ip igmp join-group 224.200.200.1 ! ! interface Vlan3 ip address 192.168.2.1 255.255.255.0 ip pim sparse-mode ip nat inside ! sh ip pim neighbor PIM Neighbor Table Mode: B - Bidir Capable, DR - Designated Router, N - Default DR Priority, S - State Refresh Capable Neighbor Interface Uptime/Expires Ver DR Address Prio/Mode 10.1.1.1 FastEthernet4 01:04:31/00:01:43 v2 100/ DR Подскажите пожалуйста, как это реализовать более правильно. Должен же быть вариант сделать это и без pim?
  8. Вам удалось найти подходящее решение базе квагги?
  9. Имеется: freeradius 2.1.8 собранный из исходников на debian etch (с поддержкой openssl) dlink dwl 2100ap в качестве точки доступа и радиус клиента. клиенты nokia e70, nokia n810 (maemo diablo) радиус настроен по how-to http://www.ixbt.com/comm/prac-wpa-eap_2.shtml Клиенты пормально логинятся на точку и работают в интернете, причём оба, с одним и тем-же логином. В радиусе включена поддержка mysql. юзеры берутся из базы, аккаунтинг пишется в базу. Небходиомо настроить simultaneous-use, для того чтобы ограничить одновремееные подключения с одним и тем-же username. Вот тут начинаются проблемы: 00-17-b0-bd-93-c1 - это nokia e70 00-1d-6e-9b-f6-94 - это nokia n810 mysql> select acctsessionid, username, groupname, acctsessiontime, callingstationid, acctstarttime, acctstoptime from radacct order by radacctid; +-----------------------+----------------------------+-----------+-----------------+-------------------+---------------------+---------------------+ | acctsessionid | username | groupname | acctsessiontime | callingstationid | acctstarttime | acctstoptime | +-----------------------+----------------------------+-----------+-----------------+-------------------+---------------------+---------------------+ | 0000000006:0000000004 | testuser | | 2528 | 00-17-b0-bd-93-c1 | 2010-02-09 22:50:39 | 2010-02-09 23:32:47 | | 0000000006:0000000006 | testuser | | 423 | 00-17-b0-bd-93-c1 | 2010-02-09 23:33:14 | 2010-02-09 23:40:17 | | 0000000006:0000000008 | testuser | | 687 | 00-17-b0-bd-93-c1 | 2010-02-09 23:58:18 | 2010-02-10 00:09:46 | | 0000000006:0000000011 | XnDIGXtz6FxG1Lm=264qjFTm | | 399 | 00-1d-6e-9b-f6-94 | 2010-02-10 00:30:00 | 2010-02-10 00:36:39 | | 0000000006:0000000012 | testuser | | 1 | 00-17-b0-bd-93-c1 | 2010-02-10 00:36:04 | 2010-02-10 00:36:07 | | 0000000006:0000000013 | testuser | | 166 | 00-17-b0-bd-93-c1 | 2010-02-10 00:53:08 | 2010-02-10 00:55:54 | | 0000000006:0000000014 | fEeNaVcZFqw6eOQmT=24VDu0 | | 0 | 00-1d-6e-9b-f6-94 | 2010-02-10 00:53:49 | NULL | | 0000000006:0000000015 | testuser | | 0 | 00-17-b0-bd-93-c1 | 2010-02-10 00:55:56 | NULL | | 0000000006:0000000016 | SkX5Cd=24pug04zO0=244db6bG | | 1075 | 00-1d-6e-9b-f6-94 | 2010-02-10 01:03:20 | 2010-02-10 01:21:16 | | 0000000006:0000000017 | yTxQeJ9nTwhq6YzzxEeTSm | | 0 | 00-1d-6e-9b-f6-94 | 2010-02-10 01:21:21 | NULL | | 0000000006:0000000017 | | | 581 | 00-1d-6e-9b-f6-94 | 2010-02-10 01:21:22 | 2010-02-10 01:31:03 | | 0000000006:0000000018 | 9RkUQr9JaZr2UnRNAPiHOm | | 0 | 00-1d-6e-9b-f6-94 | 2010-02-10 01:32:44 | NULL | | 0000000006:0000000019 | y5xPgvjzUfwR=24NlSW4hOLG | | 465 | 00-1d-6e-9b-f6-94 | 2010-02-10 01:49:02 | 2010-02-10 01:56:47 | | 0000000006:0000000021 | C5iOh=260pJzBRazjk3voZUW | | 306 | 00-1d-6e-9b-f6-94 | 2010-02-10 01:56:55 | 2010-02-10 02:02:02 | | 0000000006:0000000022 | testuser | | 0 | 00-17-b0-bd-93-c1 | 2010-02-10 01:59:52 | NULL | | 0000000006:0000000023 | testuser | | 101 | 00-17-b0-bd-93-c1 | 2010-02-10 01:59:54 | 2010-02-10 02:01:33 | | 0000000006:0000000024 | kZ6ZqLNcQRpP2TT4S1x7w0 | | 1041 | 00-1d-6e-9b-f6-94 | 2010-02-10 02:02:09 | 2010-02-10 02:19:29 | | 0000000006:0000000026 | TaN=2619bWZrEjPIq1qpl3Um | | 503 | 00-1d-6e-9b-f6-94 | 2010-02-10 02:19:32 | 2010-02-10 02:27:56 | | 0000000006:0000000027 | SNnQgLPI4ZsKrcQt5NjWdm | | 128 | 00-1d-6e-9b-f6-94 | 2010-02-10 02:27:59 | 2010-02-10 02:30:05 | | 0000000006:0000000028 | pgLbu3fQQsFnAGXA2dG0gm | | 377 | 00-1d-6e-9b-f6-94 | 2010-02-10 02:30:09 | 2010-02-10 02:36:26 | | 0000000006:0000000029 | BcMGdNHkt91L6a5ZFYyIO0 | | 81 | 00-1d-6e-9b-f6-94 | 2010-02-10 02:36:31 | 2010-02-10 02:37:51 | | 0000000006:0000000030 | 1QLux0VjUKds86GfFpMMV0 | | 190 | 00-1d-6e-9b-f6-94 | 2010-02-10 02:37:54 | 2010-02-10 02:41:05 | | 0000000006:0000000031 | zSIcExbtS=26iPOERmNlmZzm | | 383 | 00-1d-6e-9b-f6-94 | 2010-02-10 02:41:12 | 2010-02-10 02:47:35 | | 0000000006:0000000032 | x5bwXhKmLF8PCpzsg3aSG0 | | 318 | 00-1d-6e-9b-f6-94 | 2010-02-10 02:47:38 | 2010-02-10 02:52:56 | | 0000000006:0000000033 | uxogNaSRcnoeya=26GOh8R90 | | 77 | 00-1d-6e-9b-f6-94 | 2010-02-10 02:53:00 | 2010-02-10 02:54:18 | | 0000000006:0000000034 | ZR6fvDB=244TPMk1hcaD=26si0 | | 41090 | 00-1d-6e-9b-f6-94 | 2010-02-10 02:54:21 | 2010-02-10 14:19:11 | | 0000000006:0000000035 | testuser | | 121 | 00-17-b0-bd-93-c1 | 2010-02-10 14:15:47 | 2010-02-10 14:17:46 | | 0000000006:0000000036 | S9M2ZKPNs0fgMcNP9mZXWG | | 4362 | 00-1d-6e-9b-f6-94 | 2010-02-10 14:19:15 | 2010-02-10 15:31:56 | | 0000000006:0000000037 | testuser | | 0 | 00-17-b0-bd-93-c1 | 2010-02-10 14:19:43 | NULL | | 0000000006:0000000038 | testuser | | 4141 | 00-17-b0-bd-93-c1 | 2010-02-10 14:19:45 | 2010-02-10 15:28:47 | | 0000000006:0000000039 | FBAWYhSJofC6F7P8SvJXR0 | | 0 | 00-1d-6e-9b-f6-94 | 2010-02-10 15:31:58 | NULL | | 0000000006:0000000040 | testuser | | 0 | 00-17-b0-bd-93-c1 | 2010-02-10 15:35:26 | NULL | | 0000000006:0000000041 | testuser | | 0 | 00-17-b0-bd-93-c1 | 2010-02-10 15:35:27 | NULL | +-----------------------+----------------------------+-----------+-----------------+-------------------+---------------------+---------------------+ Во всех пакетах в сторону радиуса при подключении n810 фигурирует этот идентификатор, при подключении e70 - открытый username. mysql> select * from radcheck where username = 'testuser'; +----+----------+--------------------+----+----------+ | id | username | attribute | op | value | +----+----------+--------------------+----+----------+ | 1 | testuser | Cleartext-Password | := | testtest | +----+----------+--------------------+----+----------+ Аутентификация проходит без проблем. Вопрос в том, где радиус хранит cleartext username, и как сделать так чтобы в логи и radacct он писал именно его? конфиг радиуса: FreeRADIUS Version 2.1.8, for host i486-pc-linux-gnu, built on Feb 8 2010 at 17:58:40 Copyright (C) 1999-2009 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /etc/freeradius/radiusd.conf including configuration file /etc/freeradius/proxy.conf including configuration file /etc/freeradius/clients.conf including configuration file /etc/freeradius/snmp.conf including configuration file /etc/freeradius/eap.conf including configuration file /etc/freeradius/sql.conf including configuration file /etc/freeradius/sql/mysql/dialup.conf including configuration file /etc/freeradius/policy.conf including files in directory /etc/freeradius/sites-enabled/ including configuration file /etc/freeradius/sites-enabled/default including configuration file /etc/freeradius/sites-enabled/inner-tunnel main { user = "freerad" group = "freerad" allow_core_dumps = no } including dictionary file /etc/freeradius/dictionary main { prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = yes auth = yes auth_badpass = yes auth_goodpass = yes } security { max_attributes = 200 reject_delay = 1 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "testing123" response_window = 20 max_outstanding = 65536 require_message_authenticator = no zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 irt = 2 mrt = 16 mrc = 5 mrd = 30 } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "testing123" nastype = "other" } client 192.168.0.230 { require_message_authenticator = no secret = "test" nastype = "other" } client 192.168.0.137 { require_message_authenticator = no secret = "test" shortname = "dlink-2100ap-1" nastype = "other" } client 192.168.0.18 { require_message_authenticator = no secret = "test" shortname = "dlink-2100ap-2" nastype = "other" } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating exec exec { wait = yes input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating expr Module: Linked to module rlm_expiration Module: Instantiating expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server inner-tunnel { modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating chap Module: Linked to module rlm_mschap Module: Instantiating mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = no } Module: Linked to module rlm_unix Module: Instantiating unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Module: Linked to module rlm_eap Module: Instantiating eap eap { default_eap_type = "peap" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = yes max_sessions = 4096 } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 pem_file_type = yes private_key_file = "/etc/freeradius/newcert/certificates/radius.somenet.key" certificate_file = "/etc/freeradius/newcert/certificates/radius.somenet.crt" CA_file = "/etc/freeradius/newcert/somenet-ca.crt" private_key_password = "testtest" dh_file = "/etc/freeradius/newcert/certificates/dh" random_file = "/etc/freeradius/newcert/certificates/random" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" make_cert_command = "/etc/freeradius/newcert/certificates/bootstrap" cache { enable = no lifetime = 24 max_entries = 255 } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = yes use_tunneled_reply = yes virtual_server = "inner-tunnel" include_length = yes } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = yes proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_realm Module: Instantiating suffix realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Instantiating ntdomain realm ntdomain { format = "prefix" delimiter = "\" ignore_default = no ignore_null = no } Module: Linked to module rlm_sql Module: Instantiating sql sql { driver = "rlm_sql_mysql" server = "localhost" port = "" login = "radius" password = "somepassword" radius_db = "radius" read_groups = yes sqltrace = no sqltracefile = "/var/log/freeradius/sqltrace.sql" readclients = no deletestalesessions = yes num_sql_socks = 5 lifetime = 0 max_queries = 0 sql_user_name = "%{User-Name}" default_user_profile = "" nas_query = "SELECT id, nasname, shortname, type, secret FROM nas" authorize_check_query = "SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_reply_query = "SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_group_check_query = "SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{Sql-Group}' ORDER BY id" authorize_group_reply_query = "SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{Sql-Group}' ORDER BY id" accounting_onoff_query = " UPDATE radacct SET acctstoptime = '%S', acctsessiontime = unix_timestamp('%S') - unix_timestamp(acctstarttime), acctterminatecause = '%{Acct-Terminate-Cause}', acctstopdelay = %{%{Acct-Delay-Time}:-0} WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= '%S'" accounting_update_query = " UPDATE radacct SET framedipaddress = '%{Framed-IP-Address}', acctsessiontime = '%{Acct-Session-Time}', acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}' WHERE acctsessionid = '%{Acct-Session-Id}' AND username = '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}'" accounting_update_query_alt = " INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctsessiontime, acctauthentic, connectinfo_start, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, servicetype, framedprotocol, framedipaddress, acctstartdelay, xascendsessionsvrkey) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', DATE_SUB('%S', INTERVAL (%{%{Acct-Session-Time}:-0} + %{%{Acct-Delay-Time}:-0}) SECOND), '%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '0', '%{X-Ascend-Session-Svr-Key}')" accounting_start_query = " INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress, acctstartdelay, acctstopdelay, xascendsessionsvrkey) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', '%S', NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '%{%{Acct-Delay-Time}:-0}', '0', '%{X-Ascend-Session-Svr-Key}')" accounting_start_query_alt = " UPDATE radacct SET acctstarttime = '%S', acctstartdelay = '%{%{Acct-Delay-Time}:-0}', connectinfo_start = '%{Connect-Info}' WHERE acctsessionid = '%{Acct-Session-Id}' AND username = '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}'" accounting_stop_query = " UPDATE radacct SET acctstoptime = '%S', acctsessiontime = '%{Acct-Session-Time}', acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', acctterminatecause = '%{Acct-Terminate-Cause}', acctstopdelay = '%{%{Acct-Delay-Time}:-0}', connectinfo_stop = '%{Connect-Info}' WHERE acctsessionid = '%{Acct-Session-Id}' AND username = '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}'" accounting_stop_query_alt = " INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress, acctstartdelay, acctstopdelay) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', DATE_SUB('%S', INTERVAL (%{%{Acct-Session-Time}:-0} + %{%{Acct-Delay-Time}:-0}) SECOND), '%S', '%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{Connect-Info}', '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Acct-Terminate-Cause}', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '0', '%{%{Acct-Delay-Time}:-0}')" group_membership_query = "SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority" connect_failure_retry_delay = 60 simul_count_query = "" simul_verify_query = "SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL" postauth_query = "INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S')" safe-characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" } rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked rlm_sql (sql): Attempting to connect to radius@localhost:/radius rlm_sql (sql): starting 0 rlm_sql (sql): Attempting to connect rlm_sql_mysql #0 rlm_sql_mysql: Starting connect to MySQL server for #0 rlm_sql (sql): Connected new DB handle, #0 rlm_sql (sql): starting 1 rlm_sql (sql): Attempting to connect rlm_sql_mysql #1 rlm_sql_mysql: Starting connect to MySQL server for #1 rlm_sql (sql): Connected new DB handle, #1 rlm_sql (sql): starting 2 rlm_sql (sql): Attempting to connect rlm_sql_mysql #2 rlm_sql_mysql: Starting connect to MySQL server for #2 rlm_sql (sql): Connected new DB handle, #2 rlm_sql (sql): starting 3 rlm_sql (sql): Attempting to connect rlm_sql_mysql #3 rlm_sql_mysql: Starting connect to MySQL server for #3 rlm_sql (sql): Connected new DB handle, #3 rlm_sql (sql): starting 4 rlm_sql (sql): Attempting to connect rlm_sql_mysql #4 rlm_sql_mysql: Starting connect to MySQL server for #4 rlm_sql (sql): Connected new DB handle, #4 Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Linked to module rlm_sql_log Module: Instantiating sql_log sql_log { path = "/var/log/freeradius/radacct/sql-relay" Post-Auth = "INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ('%{User-Name}', '%{User-Password:-Chap-Password}', '%{reply:Packet-Type}', '%S');" sql_user_name = "%{%{User-Name}:-DEFAULT}" utf8 = no safe-characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" } Module: Linked to module rlm_attr_filter Module: Instantiating attr_filter.access_reject attr_filter attr_filter.access_reject { attrsfile = "/etc/freeradius/attrs.access_reject" key = "%{User-Name}" } } # modules } # server server { modules { Module: Checking authenticate {...} for more modules to load Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating preprocess preprocess { huntgroups = "/etc/freeradius/huntgroups" hints = "/etc/freeradius/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Linked to module rlm_detail Module: Instantiating auth_log detail auth_log { detailfile = "/var/log/freeradius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Linked to module rlm_files Module: Instantiating files files { usersfile = "/etc/freeradius/users" acctusersfile = "/etc/freeradius/acct_users" preproxy_usersfile = "/etc/freeradius/preproxy_users" compat = "no" } Module: Checking accounting {...} for more modules to load Module: Instantiating attr_filter.accounting_response attr_filter attr_filter.accounting_response { attrsfile = "/etc/freeradius/attrs.accounting_response" key = "%{User-Name}" } Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } # modules } # server radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 } listen { type = "acct" ipaddr = * port = 0 } Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on proxy address * port 1814 Ready to process requests.