Jump to content
Калькуляторы

Cisco BGP Network not in table

Доброго времени суток. Есть самый обычный eBGP сосед. Который, казалось бы, шлет один самый обычный nlri. При этом сталкиваюсь вот с такой, не понятной для меня, ситуацией, и как ее можно "загуглить" ума не приложу.

 

cisco#sh ip bgp x.x.x.0/24
BGP routing table entry for x.x.x.0/24, version 119452493
Paths: (2 available, best #1, table default)
 Advertised to update-groups:
    39         46         50        
 Refresh Epoch 1
 200xxx
   y.y.y.70 from y.y.y.70 (y.y.y.70)
     Origin IGP, metric 0, localpref 100, weight 400, valid, external, best
     Community: cccc:500
 Refresh Epoch 1
 200xxx, (received-only)
   y.y.y.70 from y.y.y.70 (y.y.y.70)
     Origin IGP, metric 0, localpref 100, valid, external

cisco#sh ip bgp x.x.x.0
% Network not in table

cisco#sh ip bgp x.x.x.127
% Network not in table

cisco#sh ip bgp x.x.x.128
BGP routing table entry for x.x.x.0/24, version 119452493
Paths: (2 available, best #1, table default)
 Advertised to update-groups:
    39         46         50        
 Refresh Epoch 1
 200xxx
   y.y.y.70 from y.y.y.70 (y.y.y.70)
     Origin IGP, metric 0, localpref 100, weight 400, valid, external, best
     Community: cccc:500
 Refresh Epoch 1
 200xxx, (received-only)
   y.y.y.70 from y.y.y.70 (y.y.y.70)
     Origin IGP, metric 0, localpref 100, valid, external

cisco#sh ip bgp x.x.x.255
BGP routing table entry for x.x.x.0/24, version 119452493
Paths: (2 available, best #1, table default)
 Advertised to update-groups:
    39         46         50        
 Refresh Epoch 1
 200xxx
   y.y.y.70 from y.y.y.70 (y.y.y.70)
     Origin IGP, metric 0, localpref 100, weight 400, valid, external, best
     Community: cccc:500
 Refresh Epoch 1
 200xxx, (received-only)
   y.y.y.70 from y.y.y.70 (y.y.y.70)
     Origin IGP, metric 0, localpref 100, valid, external


cisco#sh ip route x.x.x.1
Routing entry for x.x.x.0/24
 Known via "bgp cccc", distance 20, metric 0
 Tag 200xxx, type external
 Redistributing via ospf 1
 Advertised by ospf 1 metric 1000 subnets route-map bgp2ospf
 Last update from y.y.y.70 17:13:51 ago
 Routing Descriptor Blocks:
 * y.y.y.70, from y.y.y.70, 17:13:51 ago
     Route metric is 0, traffic share count is 1
     AS Hops 1
     Route tag 200xxx
     MPLS label: none

cisco#sh ip route x.x.x.255
Routing entry for x.x.x.0/24
 Known via "bgp cccc", distance 20, metric 0
 Tag 200xxx, type external
 Redistributing via ospf 1
 Advertised by ospf 1 metric 1000 subnets route-map bgp2ospf
 Last update from y.y.y.70 17:13:54 ago
 Routing Descriptor Blocks:
 * y.y.y.70, from y.y.y.70, 17:13:54 ago
     Route metric is 0, traffic share count is 1
     AS Hops 1
     Route tag 200xxx
     MPLS label: none

 

Происходит это на ASR1000 Version 15.1(3)S1, RELEASE SOFTWARE (fc1)

 

Есть этому научное объяснение?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this