[2bit]

Cisco 2811.

Первый раз взял в руки Cisco маршрутизатор.

 

Накидал вот такой конфиг PPTP+Radius:

 

!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
aaa new-model
aaa authentication login default local
aaa authentication ppp default group radius
aaa authorization exec default local
aaa authorization network default group radius
aaa accounting network default start-stop group radius
aaa accounting system default start-stop group radius
enable secret 5 password
enable password password
!
username admin password password
ip subnet-zero
no ip rcmd domain-lookup
ip domain-name router
hostname Router
ip name-server 192.168.1.21
ip cef
vpdn enable
!
vpdn-group 1
!
! Default PPTP VPDN group
accept-dialin
protocol any
virtual-template 1
local name pptp_gateway
!
!
interface FastEthernet0/0
no ip address
no ip route-cache
shutdown
duplex auto
speed auto
!
interface FastEthernet0/1
ip address 192.168.1.1 255.255.255.0
no ip route-cache
duplex full
speed auto
no mop enabled
!
interface FastEthernet0/0
ip address 172.18.2.2 255.255.0.0
no ip route-cache
duplex full
speed auto
no mop enabled
!
! Интерфейс замыкания на себя...
interface Loopback 1
ip address 172.22.0.0 255.255.255.255
!
!
interface Virtual-Template1
ip unnumbered Loopback 1
ip mtu 1492
autodetect encapsulation ppp
ppp authentication chap callin
!
!
!
ip http server
no ip http secure-server
!
ip radius source-interface FastEthernet0/1
!
radius-server configure-nas
radius-server host 192.168.1.21 auth-port 1812 acct-port 1813
radius-server retransmit 3
radius-server timeout 30
radius-server key radius
radius-server vsa send accounting
radius-server vsa send authentication
!
!
!
!
line con 0
line aux 0
line vty 0 4
password password
!
!
end

 

Это вроде как черновой вариант. Сильно страшный?

 

Вопрос в следующем. Radius начинает работать только когда пройдет 15мин после загрузки Cisco.

 

В консоле пишется:

 

Press RETURN to get started!

sslinit fn

*Apr  9 15:42:20.779: %VPN_HW-6-INFO_LOC: Crypto engine: onboard 0  State changed to: Initialized
*Apr  9 15:42:20.783: %VPN_HW-6-INFO_LOC: Crypto engine: onboard 0  State changed to: Enabled
*Apr  9 15:42:21.775: %LINEPROTO-5-UPDOWN: Line protocol on Interface VoIP-Null0, changed state to up
*Apr  9 15:42:21.775: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up
*Apr  9 15:42:21.775: %LINK-3-UPDOWN: Interface FastEthernet0/1, changed state to up
*Apr  9 15:42:22.775: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to down
*Apr  9 15:42:22.775: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up
*Apr  9 15:42:24.071: %SYS-5-CONFIG_I: Configured from memory by console
*Apr  9 15:42:24.587: %SYS-5-RESTART: System restarted --
Cisco IOS Software, 2800 Software (C2800NM-ADVIPSERVICESK9-M), Version 12.4(3a), RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by Cisco Systems, Inc.
Compiled Fri 30-Sep-05 13:24 by hqluong
*Apr  9 15:42:24.591: %SNMP-5-COLDSTART: SNMP agent on host Router is undergoing a cold start
*Apr  9 15:42:25.147: %CRYPTO-6-ISAKMP_ON_OFF: ISAKMP is OFF
*Apr  9 15:42:25.147: %LINEPROTO-5-UPDOWN: Line protocol on Interface Loopback1, changed state to up
*Apr  9 15:42:25.815: %LINK-5-CHANGED: Interface FastEthernet0/0, changed state to administratively down
*Apr  9 15:42:29.603: %RADIUS-6-GETROUTES: Retrieving static routes in user route-1
*Apr  9 15:43:04.907: %RADIUS-3-NOHOSTNAME: Failed to retrieve my hostname.
*Apr  9 15:47:11.267: %RADIUS-4-RADIUS_DEAD: RADIUS server 192.168.1.21:1812,1813 is not responding.
*Apr  9 15:47:11.271: %RADIUS-4-RADIUS_ALIVE: RADIUS server 192.168.1.21:1812,1813 has returned.
*Apr  9 15:49:37.663: %RADIUS-4-RADIUS_DEAD: RADIUS server 192.168.1.21:1812,1813 is not responding.
*Apr  9 15:49:37.667: %RADIUS-4-RADIUS_ALIVE: RADIUS server 192.168.1.21:1812,1813 has returned.
*Apr  9 15:52:23.891: %RADIUS-4-RADIUS_DEAD: RADIUS server 192.168.1.21:1812,1813 is not responding.
*Apr  9 15:52:23.895: %RADIUS-4-RADIUS_ALIVE: RADIUS server 192.168.1.21:1812,1813 has returned.
*Apr  9 15:55:52.471: %RADIUS-4-RADIUS_DEAD: RADIUS server 192.168.1.21:1812,1813 is not responding.
*Apr  9 15:55:52.471: %AAAA-3-DROPACCTSNDFAIL: Accounting record dropped, send to server failed: system-start
*Apr  9 15:55:52.471: %RADIUS-4-RADIUS_ALIVE: RADIUS server 192.168.1.21:1812,1813 has returned.
*Apr  9 15:59:03.115: %LINK-3-UPDOWN: Interface Virtual-Access2, changed state to up
*Apr  9 15:59:03.119: %LINK-3-UPDOWN: Interface Virtual-Access3, changed state to up
*Apr  9 15:59:04.115: %LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Access2, changed state to up
*Apr  9 15:59:04.119: %LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Access3, changed state to up
*Apr  9 15:59:29.107: %LINK-3-UPDOWN: Interface Virtual-Access3, changed state to down
*Apr  9 15:59:30.107: %LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Access3, changed state to down

Изменено 9 апреля, 2009 пользователем 2bit

[2bit]

При загрузке Cisco ломится на Radius сервер с какими-то запросами `Route-1`/

 

Вообщем не человек кошка =( (С)

[2bit]

Лишние запросы на Radius отключаются через: no radius-server configure-nas

Ошибки о не доступности Radius сервера являются багом Cisco и никак их не поправить.