ichthyandr Posted October 18, 2022 Всем привет, sh version SNR-S2990G-24FX Device, Compiled on Oct 08 09:22:49 2018 sysLocation Building 57/2,Predelnaya st, Ekaterinburg, Russia CPU Mac f8:f0:82:77:ee:ef Vlan MAC f8:f0:82:77:ee:ee SoftWare Version 7.0.3.5(R0102.0283) BootRom Version 7.1.41 HardWare Version 1.0.2-UPS CPLD Version N/A Serial No.:SW041710I713000024 Copyright (C) 2018 NAG LLC All rights reserved Last reboot is warm reset. Uptime is 0 weeks, 0 days, 0 hours, 6 minutes порт управления sh int ethernet 0 Ethernet0 is up(0), line protocol is up, dev index is 295 Device flag 0x1003(UP BROADCAST MULTICAST) Time since last status change:0w-0d-0h-7m-6s (426 seconds) IPv4 address is: 192.168.0.247 255.255.255.0 (Primary) VRF Bind: Not Bind Hardware is Fast-Ethernet, address is 00-00-00-00-00-00 MTU is 1500 bytes , BW is 100000 Kbit, Encapsulation ARPA Negotiation Full-duplex Negotiation 100M bits 5 minute input rate 14152 bits/sec, 22 packets/sec 5 minute output rate 786 bits/sec, 1 packets/sec The last 5 second input rate 18882 bits/sec, 25 packets/sec The last 5 second output rate 784 bits/sec, 1 packets/sec Input packets statistics: Input queue 0/300, 0 drops 9331 packets input, 750964 bytes, 0 no buffer Output packets statistics: 426 packets output, 41620 bytes, 0 underruns 0 output errors, 0 collisions Hardware is Fast-Ethernet, address is 00-00-00-00-00-00 почему и как это можно исправить? Вставить ник Quote Ответить с цитированием Share this post Link to post Share on other sites More sharing options...
Evgeniy Rychkov Posted October 20, 2022 Здравствуйте. 1. Надо зайти в boot режим - во время загрузки коммутатора нажимаем ctrl + b 2. После перехода в boot-меню, примените команду "setmac cpu" и укажите мак на 1 последний бит больше, чем CPU MAC "f8-f0-82-77-ee-f0". Вставить ник Quote Ответить с цитированием Share this post Link to post Share on other sites More sharing options...