Jump to content
Калькуляторы

Icinga Mониторинг удаленных серверов HP ProLiant

Добрый день. Нужна помощь с мониторингом удаленных серверов при помощи ICINGA на HP ProLiant, а частности HP ProLiant DL180 Gen6 c iLO100. На HP ProLiant стоит Win Server 2008. Нужна проверка по состояни дисков. При помощи OID не ясно или не показыват параметры состояния. На сервере стои HP Smart Storage Administrator и HPE Insight Management Agent. HP Smart Storage Administrator видет неисправный диск. Запрос идёть через SNMP. Не знаю как правильно настроить Icinga (Icingag на Ubuntu). В области Unix я ещё новичок, так-что пожалуста сильно не пинать.

Share this post


Link to post
Share on other sites

http://www.claudiokuenzler.com/blog/374/hp-proliant-snmp-oid-query-hardware-disk-drive-information-status#.VzyB2JGLTIU

 

Here are some examples for disk/drive related lookups.

 

Show the current HP SmartArray Firmware version:

 

snmpwalk -v 2c -c public localhost 1.3.6.1.4.1.232.3.2.2.1.1.3

SNMPv2-SMI::enterprises.232.3.2.2.1.1.3.1 = STRING: "5.70"

 

Check the current status for logical drives:

 

snmpwalk -v 2c -c public localhost 1.3.6.1.4.1.232.3.2.3.1.1.4

SNMPv2-SMI::enterprises.232.3.2.3.1.1.4.1.1 = INTEGER: 2

SNMPv2-SMI::enterprises.232.3.2.3.1.1.4.1.2 = INTEGER: 2

SNMPv2-SMI::enterprises.232.3.2.3.1.1.4.1.3 = INTEGER: 2

SNMPv2-SMI::enterprises.232.3.2.3.1.1.4.1.4 = INTEGER: 2

 

For each logical drive a status code is returned. Refer to the following table to translate:

 

1: other

8: wrongDrive2: ok9: badConnect

3: failed

10: overheating

4: unconfigured

11: shutdown

5: recovering

12: expanding

6: readyForRebuild13: notAvailable

7: rebuilding14: queuedForExpansion

Check the current status for physical drives:

 

snmpwalk -v 2c -c public localhost 1.3.6.1.4.1.232.3.2.5.1.1.6

SNMPv2-SMI::enterprises.232.3.2.5.1.1.6.1.8 = INTEGER: 2

SNMPv2-SMI::enterprises.232.3.2.5.1.1.6.1.9 = INTEGER: 2

SNMPv2-SMI::enterprises.232.3.2.5.1.1.6.1.10 = INTEGER: 2

SNMPv2-SMI::enterprises.232.3.2.5.1.1.6.1.11 = INTEGER: 2

 

Note that these are the physical drives. Use the following table to translate the returned number:

 

1: other

3: failed

2: ok

4: predictiveFailure

 

 

Note: A predictiveFailure will be shown as "Smart Error" in ILO.

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this