accel-ppp version 1.7.3(upspeed)

alishkka

Опубликовано 14 апреля, 2014 (изменено) · Жалоба

Добрый день, подскажите пожалуйста по accel'у.

Начались проблемы с upspeed.

Пример:

тариф 10мб, по радиусу атрибуты передаются. Downspeed как и должно быть 10мб, а вот Upspeed 1мб. Если же убираю ограничения и не передаю атрибуты то Upspeed поднимается максимально как и Downspeed.

accel-ppp.conf

[modules]

#path=/usr/local/lib/accel-ppp

log_file

#log_tcp

#log_pgsql

pptp

pppoe

#l2tp

auth_mschap_v2

auth_mschap_v1

auth_chap_md5

auth_pap

radius

ippool

sigchld

pppd_compat

shaper_tbf

#chap-secrets

[core]

log-error=/var/log/accel-ppp/core.log

thread-count=23

[ppp]

verbose=1

min-mtu=1000

mtu=1400

mru=1400

ccp=0

#sid-case=upper

#check-ip=0

#single-session=replace

#mppe=require

[lcp]

echo-interval=30

echo-failure=3

[pptp]

#echo-interval=30

verbose=1

[pppoe]

interface=eth0.101

interface=eth0.136

interface=eth0.151

interface=eth0.152

interface=eth0.153

interface=eth0.154

interface=eth0.155

interface=eth0.156

interface=eth0.157

interface=eth0.159

interface=eth0.93

interface=eth0.999

#ac-name=xxx

#service-name=yyy

#pado-delay=0

#pado-delay=0,100:100,200:200,-1:500

#ifname-in-sid=called-sid

verbose=1

echo-interval=30

[l2tp]

#dictionary=/usr/local/share/accel-ppp/l2tp/dictionary

#hello-interval=60

#timeout=60

#rtimeout=5

#retransmit=5

#host-name=accel-ppp

verbose=1

[dns]

dns1=8.8.8.8

dns2=8.8.4.4

[radius]

dictionary=/usr/local/share/accel-ppp/radius/dictionary

nas-identifier=VPN

nas-ip-address=192.168.0.1

gw-ip-address=172.16.0.1

auth-server=192.168.0.2:1812,xxxxxx

acct-server=192.168.0.2:1813,xxxxxx

dae-server=192.168.0.1:3799,xxxxxx

dm_coa_secret=xxxxxx

verbose=1

#timeout=3

#max-try=3

acct-timeout=0

[client-ip-range]

192.168.0.0/16

10.10.0.0/16

10.253.253.0/24

10.17.139.0/24

[ip-pool]

gw-ip-address=172.16.0.1

172.16.0.2-254

172.16.1.2-254

172.16.2.2-254

172.16.3.2-254

172.16.4.2-254

[log]

log-file=/var/log/accel-ppp/accel-ppp.log

log-emerg=/var/log/accel-ppp/emerg.log

log-fail-file=/var/log/accel-ppp/auth-fail.log

#log-debug=/dev/stdout

#log-tcp=127.0.0.1:3000

copy=1

#color=1

#per-user-dir=per_user

#per-session-dir=per_session

#per-session=1

level=3

#log-tcp=127.0.0.1:3000

[log-pgsql]

conninfo=user=log

log-table=log

[pppd-compat]

#ip-pre-up=/etc/ppp/ip-pre-up

#ip-up=/etc/ppp/ip-up

#ip-down=/etc/ppp/ip-down

#ip-change=/etc/ppp/ip-change

radattr-prefix=/var/run/radattr

verbose=1

[chap-secrets]

gw-ip-address=192.168.100.1

#chap-secrets=/etc/ppp/chap-secrets

[tbf]

#attr=Filter-Id

#down-burst-factor=0.1

#up-burst-factor=1.0

#latency=50z

#attr-down=PPPD-Downstream-Speed

#attr-up=PPPD-Upstream-Speed

attr-down=PPPD-Downstream-Speed-Limit

attr-up=PPPD-Upstream-Speed-Limit

[cli]

telnet=127.0.0.1:2000

tcp=127.0.0.1:2001

#password=123

Вырезка из ip-up:

if [ -f /var/run/radattr.$1 ]

then

DOWNSPEED=`/usr/bin/awk '/PPPD-Downstream-Speed-Limit/ {print $2}' /var/run/radattr.$1`

UPSPEED=`/usr/bin/awk '/PPPD-Upstream-Speed-Limit/ {print $2}' /var/run/radattr.$1`

FILTERS=`/usr/bin/awk '/Filter-Id/ {print $2}' /var/run/radattr.$1`

#echo $DOWNSPEED

#echo $UPSPEED

#echo $FILTERS

/usr/sbin/tc qdisc del dev $1 root > /dev/null

/usr/sbin/tc qdisc del dev $1 ingress > /dev/null

##### speed server->client

if [ "$UPSPEED" != "0" ] ;

then

/usr/sbin/tc qdisc add dev $1 root handle 1: htb default 20 r2q 1

/usr/sbin/tc class add dev $1 parent 1: classid 1:1 htb rate ${UPSPEED}kbit burst 4k

/usr/sbin/tc class add dev $1 parent 1:1 classid 1:10 htb rate ${UPSPEED}kbit burst 4k prio 1

/usr/sbin/tc class add dev $1 parent 1:1 classid 1:20 htb rate ${UPSPEED}kbit burst 4k prio 2

/usr/sbin/tc qdisc add dev $1 parent 1:10 handle 10: sfq perturb 10 quantum 1400

/usr/sbin/tc qdisc add dev $1 parent 1:20 handle 20: sfq perturb 10 quantum 1400

/usr/sbin/tc filter add dev $1 parent 1:0 protocol ip prio 10 u32 match ip tos 0x10 0xff flowid 1:10

/usr/sbin/tc filter add dev $1 parent 1:0 protocol ip prio 10 u32 match ip protocol 1 0xff flowid 1:10

/usr/sbin/tc filter add dev $1 parent 1: protocol ip prio 10 u32 match ip protocol 6 0xff match u8 0x05 0x0f at 0 match u16 0x0000 0xffc0 at 2 match u8 0x10 0xff at 33 flowid 1:10

##### speed client->server

if [ "$DOWNSPEED" != "0" ] ;

then

/usr/sbin/tc qdisc add dev $1 handle ffff: ingress

/usr/sbin/tc filter add dev $1 parent ffff: protocol ip prio 50 u32 match ip src 0.0.0.0/0 police rate ${DOWNSPEED}kbit burst 12k drop flowid :1

/var/log/messages :

2014-04-14T12:16:04.346615+04:00 linux-f2js ip-up: TC HTB version 3.3

2014-04-14T12:16:04.346895+04:00 linux-f2js ip-up: Illegal "rate"

2014-04-14T12:16:04.347240+04:00 linux-f2js ip-up: Usage: ... qdisc add ... htb [default N] [r2q N]

2014-04-14T12:16:04.347708+04:00 linux-f2js ip-up: default minor id of class to which unclassified packets are sent {0}

2014-04-14T12:16:04.347964+04:00 linux-f2js ip-up: r2q DRR quantums are computed as rate in Bps/r2q {10}

2014-04-14T12:16:04.348237+04:00 linux-f2js ip-up: debug string of 16 numbers each 0-3 {0}

2014-04-14T12:16:04.348486+04:00 linux-f2js ip-up:.

2014-04-14T12:16:04.348812+04:00 linux-f2js ip-up: ... class add ... htb rate R1 [burst B1] [mpu B] [overhead O]

2014-04-14T12:16:04.349088+04:00 linux-f2js ip-up: [prio P] [slot S] [pslot PS]

2014-04-14T12:16:04.349325+04:00 linux-f2js ip-up: [ceil R2] [cburst B2] [mtu MTU] [quantum Q]

2014-04-14T12:16:04.349736+04:00 linux-f2js ip-up: rate rate allocated to this class (class can still borrow)

2014-04-14T12:16:04.350060+04:00 linux-f2js ip-up: burst max bytes burst which can be accumulated during idle period {computed}

2014-04-14T12:16:04.350340+04:00 linux-f2js ip-up: mpu minimum packet size used in rate computations

2014-04-14T12:16:04.350637+04:00 linux-f2js ip-up: overhead per-packet size overhead used in rate computations

2014-04-14T12:16:04.350909+04:00 linux-f2js ip-up: linklay adapting to a linklayer e.g. atm

2014-04-14T12:16:04.351195+04:00 linux-f2js ip-up: ceil definite upper class rate (no borrows) {rate}

2014-04-14T12:16:04.351459+04:00 linux-f2js ip-up: cburst burst but for ceil {computed}

2014-04-14T12:16:04.351847+04:00 linux-f2js ip-up: mtu max packet size we create rate map for {1600}

2014-04-14T12:16:04.352197+04:00 linux-f2js ip-up: prio priority of leaf; lower are served first {0}

2014-04-14T12:16:04.352496+04:00 linux-f2js ip-up: quantum how much bytes to serve from leaf at once {use r2q}

2014-04-14T12:16:04.352821+04:00 linux-f2js ip-up:.

2014-04-14T12:16:04.353102+04:00 linux-f2js ip-up: TC HTB version 3.3

2014-04-14T12:16:04.353420+04:00 linux-f2js ip-up: Illegal "rate"

2014-04-14T12:16:04.353691+04:00 linux-f2js ip-up: Usage: ... qdisc add ... htb [default N] [r2q N]

2014-04-14T12:16:04.353957+04:00 linux-f2js ip-up: default minor id of class to which unclassified packets are sent {0}

2014-04-14T12:16:04.354272+04:00 linux-f2js ip-up: r2q DRR quantums are computed as rate in Bps/r2q {10}

2014-04-14T12:16:04.354590+04:00 linux-f2js ip-up: debug string of 16 numbers each 0-3 {0}

2014-04-14T12:16:04.354924+04:00 linux-f2js ip-up:.

2014-04-14T12:16:04.355146+04:00 linux-f2js ip-up: ... class add ... htb rate R1 [burst B1] [mpu B] [overhead O]

2014-04-14T12:16:04.355495+04:00 linux-f2js ip-up: [prio P] [slot S] [pslot PS]

2014-04-14T12:16:04.355816+04:00 linux-f2js ip-up: [ceil R2] [cburst B2] [mtu MTU] [quantum Q]

2014-04-14T12:16:04.356123+04:00 linux-f2js ip-up: rate rate allocated to this class (class can still borrow)

2014-04-14T12:16:04.356403+04:00 linux-f2js ip-up: burst max bytes burst which can be accumulated during idle period {computed}

2014-04-14T12:16:04.356720+04:00 linux-f2js ip-up: mpu minimum packet size used in rate computations

2014-04-14T12:16:04.357013+04:00 linux-f2js ip-up: overhead per-packet size overhead used in rate computations

2014-04-14T12:16:04.357268+04:00 linux-f2js ip-up: linklay adapting to a linklayer e.g. atm

2014-04-14T12:16:04.357617+04:00 linux-f2js ip-up: ceil definite upper class rate (no borrows) {rate}

2014-04-14T12:16:04.357907+04:00 linux-f2js ip-up: cburst burst but for ceil {computed}

2014-04-14T12:16:04.358185+04:00 linux-f2js ip-up: mtu max packet size we create rate map for {1600}

2014-04-14T12:16:04.358494+04:00 linux-f2js ip-up: prio priority of leaf; lower are served first {0}

2014-04-14T12:16:04.358736+04:00 linux-f2js ip-up: quantum how much bytes to serve from leaf at once {use r2q}

2014-04-14T12:16:04.359054+04:00 linux-f2js ip-up:.

2014-04-14T12:16:04.359409+04:00 linux-f2js ip-up: TC HTB version 3.3

2014-04-14T12:16:04.359819+04:00 linux-f2js ip-up: RTNETLINK answers: No such file or directory

2014-04-14T12:16:04.370682+04:00 linux-f2js ip-up: RTNETLINK answers: No such file or directory

2014-04-14T12:16:04.430537+04:00 linux-f2js ip-up: Illegal "rate"

2014-04-14T12:16:04.431027+04:00 linux-f2js ip-up: Illegal "police"

2014-04-14T12:17:24.017866+04:00 linux-f2js netconfig: open lock for netconfig failed. Abort.

2014-04-14T12:17:24.048520+04:00 linux-f2js ip-up: RTNETLINK answers: No such file or directory

2014-04-14T12:17:24.063122+04:00 linux-f2js ip-up: RTNETLINK answers: No such file or directory

2014-04-14T13:02:32.636496+04:00 linux-f2js kernel: [434238.711191] HTB: quantum of class 10001 is big. Consider r2q change.

2014-04-14T13:02:32.651425+04:00 linux-f2js kernel: [434238.726131] HTB: quantum of class 10010 is big. Consider r2q change.

2014-04-14T13:02:32.665466+04:00 linux-f2js kernel: [434238.740731] HTB: quantum of class 10020 is big. Consider r2q change.

Изменено 15 апреля, 2014 пользователем alishkka

Войти

alishkka

Поделиться сообщением

Ссылка на сообщение

Поделиться на других сайтах

Join the conversation