[megahertz0]

Как это сделать?

logging executed-commands disable

делал.

Вот что говорит статус:

Gorkogo_26(config)#sh logging executed-commands sta
Logging executed command state is disable

 

А в лог все равно сыпется:

13 %Apr 23 13:20:22 2013 <critical> DEFAULT[zIMI]:Type:Telnet, User:megahertz, IP:10.0.100.100:43612, Command:sh logging buffered

12 %Apr 23 13:20:21 2013 <critical> DEFAULT[zIMI]:Type:Telnet, User:megahertz, IP:10.0.100.100:43612, Command:sh logging buffered \

11 %Apr 23 13:19:50 2013 <critical> DEFAULT[zIMI]:Type:Telnet, User:megahertz, IP:10.0.100.100:43612, Command:sh logging executed-commands sta

10 %Apr 23 13:19:20 2013 <critical> DEFAULT[zIMI]:Type:Telnet, User:megahertz, IP:10.0.100.100:43612, Command:conf t

9 %Apr 23 13:17:20 2013 <critical> DEFAULT[zIMI]:Type:Telnet, User:megahertz, IP:10.0.100.100:43612, Command:sh logg buff level warnings

8 %Apr 23 13:17:08 2013 <critical> DEFAULT[zIMI]:Type:Telnet, User:megahertz, IP:10.0.100.100:43612, Command:sh logg buff

7 %Apr 23 13:17:07 2013 <critical> DEFAULT[zIMI]:Type:Telnet, User:megahertz, IP:10.0.100.100:43612, Command:sh logg buff

6 %Apr 23 13:17:07 2013 <critical> DEFAULT[zIMI]:Type:Telnet, User:megahertz, IP:10.0.100.100:43612, Command:sh logg buff

5 %Apr 23 13:17:06 2013 <critical> DEFAULT[zIMI]:Type:Telnet, User:megahertz, IP:10.0.100.100:43612, Command:sh logg buff

4 %Apr 23 13:17:05 2013 <critical> DEFAULT[zIMI]:Type:Telnet, User:megahertz, IP:10.0.100.100:43612, Command:sh logg buff

3 %Apr 23 13:17:01 2013 <critical> DEFAULT[zIMI]:Type:Telnet, User:megahertz, IP:10.0.100.100:43612, Command:sh logg buff

2 %Apr 23 13:16:56 2013 <critical> DEFAULT[zIMI]:Type:Telnet, User:megahertz, IP:10.0.100.100:43612, Command:show logging executed-commands state

1 %Apr 23 13:16:46 2013 <critical> DEFAULT[zIMI]:Type:Telnet, User:megahertz, IP:10.0.100.100:43612, Command:clear logging sdram

 

Вообще идеально было бы свернуть лог команд в TACACS. Авторизация работает, все в порядке. А вот аккаунтинг не нашел как, да и можно ли?