[fency]

Добрый день!

 

имеем пару ASR1002, столкнулись с проблемой:

 

есть две б\у SFp GLC-T P\N 30-1410-02, которые ASR признает за родные,

 

Router#show hw-module subslot 0/0 transceiver 2 idprom

IDPROM for transceiver GigabitEthernet0/0/2:

Description = SFP optics (type 3)

Transceiver Type: = GE T (26)

Product Identifier (PID) = N/A

Vendor Revision = C

Serial Number (SN) = 00000MTC100302BN

Vendor Name = CISCO-METHODE

Vendor OUI (IEEE company ID) = 00.00.00 (0)

CLEI code = N/A

Cisco part number = N/A

Device State = Enabled.

Date code (yy/mm/dd) = 06/01/24

Connector type = Unknown.

Encoding = 8B10B

NRZ

Nominal bitrate = GE (1300 Mbits/s)

Minimum bit rate as % of nominal bit rate = not specified

Maximum bit rate as % of nominal bit rate = not specified

 

и есть 8 новых GLT-T P/N 30-1410-02, которые опознаются как:

 

Router#show hw-module subslot 0/0 transceiver 3 idprom

IDPROM for transceiver GigabitEthernet0/0/3:

Description = SFP optics (type 3)

Transceiver Type: = GE T (26)

Product Identifier (PID) = N/A

Vendor Revision = 1.

Serial Number (SN) = CL80T16482

Vendor Name = CL

Vendor OUI (IEEE company ID) = 00.00.00 (0)

CLEI code = N/A

Cisco part number = N/A

Device State = Enabled.

Date code (yy/mm/dd) = 12/10/30

Connector type = LC.

Encoding = 8B10B

NRZ

Nominal bitrate = GE (1300 Mbits/s)

Minimum bit rate as % of nominal bit rate = not specified

Maximum bit rate as % of nominal bit rate = not specified

 

вот на этих восьми поднимать линки не хочет.

 

Что делать? может перелить со старых SFP образ на новые? или есть иной бубен??