[u.s.s.r]

Данные cisco

Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.1(1)T, RELEASE SOFTWARE (fc1)

 

через радиус передаю атрибуты для шейпинга

lcp:interface-config#1=rate-limit input 64000 12000 24000 conform-action transmit exceed-action drop

и

lcp:interface-config#1=rate-limit output 64000 12000 24000 conform-action transmit exceed-action drop

но скорость не режется

 

на циске

Cisco2921#sh int vi4 rate-limit

 

дебаг с циски

 

*Oct 31 09:31:38.855: RADIUS:  Vendor, Cisco       [26]  109
*Oct 31 09:31:38.855: RADIUS:   Cisco AVpair       [1]   103 "lcp:interface-config#1=rate-limit output 64000 12000 24000 conform-action transmit exceed-action drop"
*Oct 31 09:31:38.855: RADIUS:  Framed-Compression  [13]  6   VJ TCP/IP Header Compressi[1]
*Oct 31 09:31:38.855: RADIUS:  Framed-Protocol     [7]   6   PPP                       [1]
*Oct 31 09:31:38.855: RADIUS:  Service-Type        [6]   6   Framed                    [2]
*Oct 31 09:31:38.855: RADIUS:  Vendor, Cisco       [26]  12
*Oct 31 09:31:38.855: RADIUS:  Ascend-Max-Time     [194] 6
*Oct 31 09:31:38.855: RADIUS:   00 00 0E 10
*Oct 31 09:31:38.855: RADIUS:  Unsupported         [230] 6
*Oct 31 09:31:38.855: RADIUS:   00 00 01 2C                 [ ,]
*Oct 31 09:31:38.855: RADIUS:  Acct-Interim-Interva[85]  6   90
*Oct 31 09:31:38.855: RADIUS:  Vendor, Cisco       [26]  108
*Oct 31 09:31:38.855: RADIUS:   Cisco AVpair       [1]   102 "lcp:interface-config#1=rate-limit input 64000 12000 24000 conform-action transmit exceed-action drop"

 

если вручную прописать, то шейпинг работает.

interface Virtual-Template1
 rate-limit output 1024000 128000 256000 conform-action transmit exceed-action drop
 rate-limit input 512000 128000 256000 conform-action transmit exceed-action drop

Edited October 31, 2012 by u.s.s.r

[u.s.s.r]

Что ж все мимо проходят?

намекнули бы.