Jump to content
Калькуляторы

3com baseline 2426 ip-адрес неизвестен

Здравствуйте.

Приехал вот мне свичок... IP прежнему хозяину неизвестен. От DHCP-сервера не запрашивает. 169.254.x.y (с наклейки на корпусе) тоже не походит. Очевидно, статикой какой-то вбит. Самое интересное - консольного порта нет :(

Как обрести управление? В мануале все способы рассчитаны на доступ через консольный интерфейс. Может существует какая-нибудь процедура хард-ресета? Или теперь это бесполезный кирпич? )

Share this post


Link to post
Share on other sites

1The Switch tries to configure itself with the default IP address 169.254.x.y, where x and y are converted from the last two bytes of its MAC address.

For example, if the MAC address is 08004E000102, the IP address would be 169.254.1.2. This address is used if the Switch is operating in a standalone mode, or no other switches on the network have this IP address.

The Switch also assigns the subnet mask 255.255.0.0 (default class B mask) to itself.

2If this default IP address is already in use on the network, then the Switch detects this, and increments the last byte of the MAC address by one to generate its IP address.

The IP address would therefore become 169.254.1.3.

 

http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c02581572/c02581572.pdf

Share this post


Link to post
Share on other sites

Ну так и есть. Только это всё при условии, что IP не вбит статикой. В моем случае был вбит.

 

Нашел на задней стенке неприметную кнопочку. Интересно, не хард ресет ли это. Мануал говорит только про ресет из консоли...

 

Блин, еще и не в тот раздел ткнул, когда тему создавал. Простите, не со зла :(

Edited by Барагоз

Share this post


Link to post
Share on other sites

Ну так и есть. Только это всё при условии, что IP не вбит статикой. В моем случае был вбит.

 

Нашел на задней стенке неприметную кнопочку. Интересно, не хард ресет ли это. Мануал говорит только про ресет из консоли...

 

Блин, еще и не в тот раздел ткнул, когда тему создавал. Простите, не со зла :(

многие железки при включении начинают слать gratuitous ARP.

ловишь его снифером и видишь вбитый адрес.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.