Jump to content

Recommended Posts

Posted

Настраивал по инструкции http://nag.ru/goodies/instruction/cp_tone_detect%20ru.pdf

 

Тайминги выставил в соответствии с тем что видно в дебаге. Реакции ноль, линия остается занятой полсе отбоя.

 

Конфиги и то что было в отладке:

 

ITG>net set debug on

 

OK, debug mode turned on.

ITG>spy dim 3

 

ITG>79347- DIM 3 tcid: 0, CPTONE -14440 Tone On , T: 14440 Pwr: -10,

72- DIM 3 tcid: 0, CPTONE + 350 Tone Off, T: 14790 Pwr: -26,

280- DIM 3 tcid: 0, CPTONE - 350 Tone On , T: 15140 Pwr: -10,

64- DIM 3 tcid: 0, CPTONE + 350 Tone Off, T: 15490 Pwr: -26,

280- DIM 3 tcid: 0, CPTONE - 350 Tone On , T: 15840 Pwr: -10,

72- DIM 3 tcid: 0, CPTONE + 350 Tone Off, T: 16190 Pwr: -26,

280- DIM 3 tcid: 0, CPTONE - 350 Tone On , T: 16540 Pwr: -10,

72- DIM 3 tcid: 0, CPTONE + 350 Tone Off, T: 16890 Pwr: -26,

280- DIM 3 tcid: 0, CPTONE - 350 Tone On , T: 17240 Pwr: -10,

64- DIM 3 tcid: 0, CPTONE + 350 Tone Off, T: 17590 Pwr: -26,

288- DIM 3 tcid: 0, CPTONE - 350 Tone On , T: 17940 Pwr: -10,

64- DIM 3 tcid: 0, CPTONE + 350 Tone Off, T: 18290 Pwr: -26,

280- DIM 3 tcid: 0, CPTONE - 350 Tone On , T: 18640 Pwr: -10,

72- DIM 3 tcid: 0, CPTONE + 350 Tone Off, T: 18990 Pwr: -26,

280- DIM 3 tcid: 0, CPTONE - 350 Tone On , T: 19340 Pwr: -10,

72- DIM 3 tcid: 0, CPTONE + 350 Tone Off, T: 19690 Pwr: -26,

280- DIM 3 tcid: 0, CPTONE - 350 Tone On , T: 20040 Pwr: -10,

72- DIM 3 tcid: 0, CPTONE + 350 Tone Off, T: 20390 Pwr: -26,

272- DIM 3 tcid: 0, CPTONE - 350 Tone On , T: 20740 Pwr: -10,

72- DIM 3 tcid: 0, CPTONE + 350 Tone Off, T: 21090 Pwr: -26,

280- DIM 3 tcid: 0, CPTONE - 350 Tone On , T: 21440 Pwr: -10,

72- DIM 3 tcid: 0, CPTONE + 350 Tone Off, T: 21790 Pwr: -26,

280- DIM 3 tcid: 0, CPTONE - 350 Tone On , T: 22140 Pwr: -10,

332- DIM 3 tcid: 0, CPTONE + 770 Tone Off, T: 22910 Pwr: -38,

832- DIM 3 tcid: 0, CPTONE -1450 Tone On , T: 24360 Pwr: -10,

14920- DIM 3 tcid: 0, CPTONE +30050 Tone Off, T: 54410 Pwr: -62,

31157- DIM 3 tcid: 0, CPTONE -62010 Tone On , T: 50884 Pwr: -10,

14896- DIM 3 tcid: 0, CPTONE +30000 Tone Off, T: 15348 Pwr: -33,

31186- DIM 3 tcid: 0, CPTONE -3476 Tone On , T: 11872 Pwr: -10,

14888- DIM 3 tcid: 0, CPTONE +29990 Tone Off, T: 41862 Pwr: -39,

31187- DIM 3 tcid: 0, CPTONE -62080 Tone On , T: 38406 Pwr: -10,

14936- DIM 3 tcid: 0, CPTONE +30080 Tone Off, T: 2950 Pwr: -50,

 

ITG>show cp_tone_det

 

The settings for CP detection are:

Number of on/off cadence elements: 1 for Dial-Tone

min. duration max. duration

Cadence ON for 1600 0

Repeat for 1 times.

OK

 

 

Number of on/off cadence elements: 2 for Busy-Tone

min. duration max. duration

Cadence ON for 450 550

Cadence OFF for 450 550

Repeat for 5 times.

OK

 

 

Number of on/off cadence elements: 2 for Congestion-Tone

min. duration max. duration

Cadence ON for 234 286

Cadence OFF for 216 264

Repeat for 5 times.

OK

 

 

Number of on/off cadence elements: 2 for Disconnect-Tone

min. duration max. duration

Cadence ON for 330 370

Cadence OFF for 330 370

Repeat for 3 times.

OK

 

 

Number of on/off cadence elements: 2 for Disc1-Tone

min. duration max. duration

Cadence ON for 330 400

Cadence OFF for 310 380

Repeat for 5 times.

OK

 

 

Number of on/off cadence elements: 2 for Disc2-Tone

min. duration max. duration

Cadence ON for 290 350

Cadence OFF for 165 195

Repeat for 5 times.

OK

 

 

Number of on/off cadence elements: 2 for Disc3-Tone

min. duration max. duration

Cadence ON for 450 550

Cadence OFF for 450 550

Repeat for 5 times.

OK

 

 

Number of on/off cadence elements: 2 for Disc4-Tone

min. duration max. duration

Cadence ON for 450 550

Cadence OFF for 450 550

Repeat for 5 times.

OK

 

 

Number of on/off cadence elements: 2 for Disc5-Tone

min. duration max. duration

Cadence ON for 450 550

Cadence OFF for 450 550

Repeat for 5 times.

OK

 

 

ITG>show cp_tone_det_cfg

 

CP tone detection filter config

 

on_frac thresh ho_time lo_freq hi_freq

Default 60 % -22 dBm 220 ms 350 Hz 450 Hz

Alternate 50 % -37 dBm 200 ms 300 Hz 550 Hz

 

ITG>show version

 

Internet Telephony Gateway (PLA) Version: 3.29

Boot Loader Version: 4.13

RTOS Version: 2.5.0/BE

H.323 Stack Version: 3.0.9.0

DSP image Version: 8.1.2.1.

TSG Version: R8.0 Gateway (Build 4)

 

Что еще можно подкрутить в железке?

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...
На сайте используются файлы cookie и сервисы аналитики для корректной работы форума и улучшения качества обслуживания. Продолжая использовать сайт, вы соглашаетесь с использованием файлов cookie и с Политикой конфиденциальности.