[djserg-minyar]

Появилась новая трабла, теперь микротик не хочет отдавать данные для мониторинга MRTG по snmp.

Причем параметры считываются cfgmaker'ом нормально, а вот данные уже не отображаются:

 

[sergej@MIK] > snmp prin

enabled: yes

contact: Sergej

location: EKB

engine-id:

trap-target: 0.0.0.0

trap-community: public

trap-version: 2

trap-generators:

[sergej@MIK] > snmp community print

Flags: * - default

# NAME ADDRESSES

0 * public 192.168.0.1/32

 

 

а вот вывод запуска mrtg:

2012-09-07 08:41:46: WARNING: Can not determine ifNumber for public@192.168.0.12: ref: 'Name' key: 'ether1-gateway'

2012-09-07 08:41:46: WARNING: Can not determine ifNumber for public@192.168.0.12: ref: 'Name' key: 'ether2-master-local'

2012-09-07 08:41:46: WARNING: Can not determine ifNumber for public@192.168.0.12: ref: 'Name' key: 'wlan1'

2012-09-07 08:41:46: ERROR: Target[192.168.0.12_ether1-gateway][_IN_] ' $target->[0]{$mode} ' did not eval into defined data

2012-09-07 08:41:46: ERROR: Target[192.168.0.12_ether1-gateway][_OUT_] ' $target->[0]{$mode} ' did not eval into defined data

2012-09-07 08:41:46: ERROR: Target[192.168.0.12_ether2-master-local][_IN_] ' $target->[1]{$mode} ' did not eval into defined data

2012-09-07 08:41:46: ERROR: Target[192.168.0.12_ether2-master-local][_OUT_] ' $target->[1]{$mode} ' did not eval into defined data

2012-09-07 08:41:46: ERROR: Target[192.168.0.12_wlan1][_IN_] ' $target->[2]{$mode} ' did not eval into defined data

2012-09-07 08:41:46: ERROR: Target[192.168.0.12_wlan1][_OUT_] ' $target->[2]{$mode} ' did not eval into defined data

 

До этого стояло и работало все