Jump to content
Калькуляторы

Cisco 6500 Sup720 Pinnacle #3 transient Pb error

Добрый день

 

В логах каталиста временами появляется

 

Aug 15 11:11:28: %PM_SCP-SP-2-LCP_FW_ERR_INFORM: Module 9 is experiencing the following error: Pinnacle #3 transient Pb error. Recovered. (0x0000, 0x0042)

 

Вроде бы больше никак себя не проявляет, но интересно, о чем это вообще и чем грозит?

 

This message can indicate a transient Pinnacle ASIC packet buffer problem. The first [dec] is the module number. The second [dec] is the ASIC number. If the error is limited to a single module, reseat and then power cycle the module. If you see this error message frequently, contact Cisco Technical Support for further assistance.

 

модуль перевставлял. К ТАС доступа нет (

 

 

Mod Ports Card Type Model Serial No.

--- ----- -------------------------------------- ------------------ -----------

1 16 SFM-capable 16 port 10/100/1000mb RJ45 WS-X6516-GE-TX SAL0737LKPD

2 16 SFM-capable 16 port 10/100/1000mb RJ45 WS-X6516-GE-TX SAL0721DKMC

3 48 48 port 10/100/1000mb EtherModule WS-X6148-GE-TX SAD072702SW

7 2 Supervisor Engine 720 (Active) WS-SUP720-BASE SAD09040EGS

8 2 Supervisor Engine 720 (Hot) WS-SUP720-BASE SAD08290AEN

9 16 Pure SFM-mode 16 port 1000mb GBIC WS-X6816-GBIC SAD060705UL

10 16 Pure SFM-mode 16 port 1000mb GBIC WS-X6816-GBIC SAL06478UZB

11 16 Pure SFM-mode 16 port 1000mb GBIC WS-X6816-GBIC SAD0535002C

 

Cisco IOS Software, s72033_rp Software (s72033_rp-ADVENTERPRISEK9-M), Version 12.2(33)SXH8, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright © 1986-2010 by Cisco Systems, Inc.

Compiled Tue 28-Sep-10 23:28 by prod_rel_team

Share this post


Link to post
Share on other sites

Если новая меняйте модуль . Проблема похоже в ошибке доступа к памяти. Грозит смертью карты в самый неожиданный момент.вообще show tech неплохо бы посмотреть для проблемной лайн-карты

Share this post


Link to post
Share on other sites

Из подозрительного

 

Diagnostic events (storage for 500 events, 25 events recorded)

Event Type (ET): I - Info, W - Warning, E - Error

 

Time Stamp ET [Card] Event Message

------------------ -- ------ --------------------------------------------------

08/09 18:25:44.656 E [9] TestErrorCounterMonitor: ID:26 IN:3 PO:0 RE:344 R

M:255 DV:1 EG:2 CF:1 TF:26

08/09 18:25:44.656 E [9] TestErrorCounterMonitor: ID:26 IN:3 PO:1 RE:261 R

M:255 DV:1 EG:2 CF:1 TF:26

08/09 22:14:06.360 E [9] TestErrorCounterMonitor: ID:26 IN:3 PO:1 RE:261 R

M:255 DV:1 EG:2 CF:1 TF:27

08/15 06:49:15.698 E [9] TestPortTxMonitoring Failed

 

А так же

 

Module 9: Pure SFM-mode 16 port 1000mb GBIC SerialNo : SAD060705UL

 

Overall Diagnostic Result for Module 9 : PASS

Diagnostic level at card bootup: minimal

 

- Можно ли провести более детальную диагностику не перезагружая карту?

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.