Grey666 Опубликовано 9 сентября, 2011 · Жалоба Имеется 7609 с SUP720-3BXL: Sh ver: Cisco IOS Software, c7600s72033_rp Software (c7600s72033_rp-ADVIPSERVICESK9-M), Version 12.2(33)SRC6, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2010 by Cisco Systems, Inc. Compiled Mon 08-Mar-10 14:14 by prod_rel_team ROM: System Bootstrap, Version 12.2(17r)SX7, RELEASE SOFTWARE (fc1) 7609_Test_Belyaevo uptime is 27 minutes Uptime for this control processor is 27 minutes System returned to ROM by reload (SP by reload) System restarted at 10:56:31 MSK Fri Sep 9 2011 System image file is "disk1:/c7600s72033-advipservicesk9-mz.122-33.SRC6.bin" Last reload type: Normal Reload This product contains cryptographic features and is subject to United States and local country laws governing import, export, transfer and use. Delivery of Cisco cryptographic products does not imply third-party authority to import, export, distribute or use encryption. Importers, exporters, distributors and users are responsible for compliance with U.S. and local country laws. By using this product you agree to comply with applicable laws and regulations. If you are unable to comply with U.S. and local laws, return this product immediately. A summary of U.S. laws governing Cisco cryptographic products may be found at: http://www.cisco.com/wwl/export/crypto/tool/stqrg.html If you require further assistance please contact us by sending email to export@cisco.com. cisco CISCO7609 (R7000) processor (revision 1.1) with 983008K/65536K bytes of memory. Processor board ID FOX083606UH SR71000 CPU at 600Mhz, Implementation 0x504, Rev 1.2, 512KB L2 Cache Last reset from s/w reset 10 Virtual Ethernet interfaces 26 Gigabit Ethernet interfaces 8 Ten Gigabit Ethernet interfaces 1917K bytes of non-volatile configuration memory. 8192K bytes of packet buffer memory. 65536K bytes of Flash internal SIMM (Sector size 512K). Configuration register is 0x2102 Sh module: Mod Ports Card Type Model Serial No. --- ----- -------------------------------------- ------------------ ----------- 1 24 CEF720 24 port 1000mb SFP WS-X6724-SFP XXXXXXXXXXX 5 2 Supervisor Engine 720 (Active) WS-SUP720-3BXL XXXXXXXXXXX 8 8 CEF720 8 port 10GE with DFC WS-X6708-10GE XXXXXXXXXXX Mod MAC addresses Hw Fw Sw Status --- ---------------------------------- ------ ------------ ------------ ------- 1 xxxx.xxxx.xxxx to xxxx.xxxx.xxxx 2.4 12.2(14r)S5 12.2(33)SRC6 Ok 5 xxxx.xxxx.xxxx to xxxx.xxxx.xxxx 4.0 8.5(3) 12.2(33)SRC6 Ok 8 xxxx.xxxx.xxxx to xxxx.xxxx.xxxx 2.3 12.2(18r)S1 12.2(33)SRC6 Ok Mod Sub-Module Model Serial Hw Status ---- --------------------------- ------------------ ----------- ------- ------- 1 Centralized Forwarding Card WS-F6700-CFC XXXXXXXXXXX 2.1 Ok 5 Policy Feature Card 3 WS-F6K-PFC3BXL XXXXXXXXXXX 1.3 Ok 5 MSFC3 Daughterboard WS-SUP720 XXXXXXXXXXX 2.1 Ok 8 Distributed Forwarding Card WS-F6700-DFC3CXL XXXXXXXXXXX 1.6 Ok Rommon на SUP'е обновлен. Sh module ver: Mod Port Model Serial # Versions ---- ---- ------------------ ----------- ------------------------------------- 1 24 WS-X6724-SFP XXXXXXXXXXX Hw : 2.4 Fw : 12.2(14r)S5 Sw : 12.2(33)SRC6 Sw1: 8.7(0.22)SRC20 WS-F6700-CFC XXXXXXXXXXX Hw : 2.1 5 2 WS-SUP720-3BXL XXXXXXXXXXX Hw : 4.0 Fw : 8.5(3) Sw : 12.2(33)SRC6 Sw1: 8.7(0.22)SRC20 WS-SUP720 XXXXXXXXXXX Hw : 2.1 Fw : 12.2(17r)SX7 Sw : 12.2(33)SRC6 WS-F6K-PFC3BXL XXXXXXXXXXX Hw : 1.3 8 8 WS-X6708-10GE XXXXXXXXXXX Hw : 2.3 Fw : 12.2(18r)S1 Sw : 12.2(33)SRC6 Sw1: 8.7(0.22)SRC20 WS-F6700-DFC3CXL XXXXXXXXXXX Hw : 1.6 Купили карточку Transcend на 2GB. Sh disk1: all -#- --length-- -----date/time------ path 1 123100196 Sep 9 2011 03:36:22 +04:00 c7600s72033-advipservicesk9-mz.122-33.SRC6.bin 1880981504 bytes available (123109376 bytes used) ******** ATA Flash Card Geometry/Format Info ******** ATA CARD GEOMETRY Manufacturer Name TRANSCEND Model Number TS2GCF133 Serial Number 20100921 C613006A Firmware Revision 20100804 Number of Heads 16 Number of Cylinders 3884 Sectors per Cylinder 63 Sector Size 512 Total Sectors 3915072 ATA PARTITION 1 INFO Start Sector 63 Number of Sectors 3915009 Size in Bytes 2004484608 File System Type FAT16 Number of FAT Sectors 239 Sectors Per Cluster 64 Number of Clusters 61160 Number of Data Sectors 3914240 Base FAT Sector 108 Base Root Sector 586 Base Data Sector 618 ATA MONLIB INFO Image Monlib size 64632 Disk Monlib Size 54264 Disk Space Available 54784 Name NA End Sector NA Start sector NA Updated By NA Version NA Форматировали на софте c7600s72033-advipservicesk9-mz.122-33.SRC6.bin и s72033-pk9sv-mz.122-18.SXD6.bin. Результат один - в ИОСе флешка читается и пишется, но при загрузке получаем: System Bootstrap, Version 8.5(3) Copyright (c) 1994-2008 by cisco Systems, Inc. Cat6k-Sup720/SP processor with 1048576 Kbytes of main memory Autoboot executing command: "boot disk1:/c7600s72033-advipservicesk9-mz.122-33.SRC6.bin" Loading image, please wait ... open: read error...requested 0x4 bytes, got 0xffffffff trouble reading device magic number loadprog: error - on file open boot: cannot load "disk1:/c7600s72033-advipservicesk9-mz.122-33.SRC6.bin" Я бы согласился, что левая флешка, 2 ГБ (при рекомендованном максисуме 1ГБ), НО: Если флешка отформатирована в 122-18.SXD6, то делаем так: System Bootstrap, Version 8.5(3) Copyright (c) 1994-2008 by cisco Systems, Inc. Cat6k-Sup720/SP processor with 1048576 Kbytes of main memory Autoboot executing command: "boot disk0:/s72033-pk9sv-mz.122-18.SXD6.bin" Loading image, please wait ... monitor: command "boot" aborted due to user interrupt Exit at the end of BOOT string rommon 1 > boot disk1:/c7600s72033-advipservicesk9-mz.122-33.SRC6.bin Loading image, please wait ... Self extracting the image... [OK] Self decompressing the image : ################################################################################################################################################################ [OK] Все грузится замечательно. Если отформатирована в 122-33.SRC6, то в роммоне сначала надо сделать dir disk1:, а потом boot disk1:/c7600s72033-advipservicesk9-mz.122-33.SRC6.bin и опять получаем загруженный ИОС. Подскажите куда копать. Вставить ник Цитата Ответить с цитированием Поделиться сообщением Ссылка на сообщение Поделиться на других сайтах More sharing options...
220V Опубликовано 18 сентября, 2011 · Жалоба Большие флешки без геморроя поддерживаются только 1800/2800/3800 ISR, остальные серии могут капризничать, аналогично вашему, сталкивались на 3725. А что мешает купить CF на 1Gb? Вставить ник Цитата Ответить с цитированием Поделиться сообщением Ссылка на сообщение Поделиться на других сайтах More sharing options...
Grey666 Опубликовано 20 сентября, 2011 · Жалоба Большие флешки без геморроя поддерживаются только 1800/2800/3800 ISR, остальные серии могут капризничать, аналогично вашему, сталкивались на 3725. А что мешает купить CF на 1Gb? Отсутствием их в продаже :) 2Гб - это минимум что нашли. Вставить ник Цитата Ответить с цитированием Поделиться сообщением Ссылка на сообщение Поделиться на других сайтах More sharing options...
D^2 Опубликовано 20 сентября, 2011 · Жалоба Отсутствием их в продаже :) 2Гб - это минимум что нашли. http://shop.nag.ru/search?word=cf Вставить ник Цитата Ответить с цитированием Поделиться сообщением Ссылка на сообщение Поделиться на других сайтах More sharing options...
Grey666 Опубликовано 28 октября, 2011 · Жалоба Для истории: Проблема решилась. Оказывается, что у SUP720 (FirmWare обновляли до последнего) есть проблемы с загрузкой из Disk1. Когда вставили флешку в Disk0, то загрузка пошла прекрасно и с 1Гб и с 2Гб, даже на старых Rommon'е и Firmwar'е. Проверяли на двух разных железках - результат одинаков. Вставить ник Цитата Ответить с цитированием Поделиться сообщением Ссылка на сообщение Поделиться на других сайтах More sharing options...