ntil Posted April 20, 2011 Posted April 20, 2011 собственно при входящем звонке с SIP циска отвечает 183 Session Progress вместо 180 Ringing а мой SIP провайдер не пропускает РТП с рингбеком - т.е. нада както заставить циску слать 180. rtr#sh ver Cisco Internetwork Operating System Software IOS (tm) C1700 Software (C1700-IPVOICE-M), Version 12.3(23), RELEASE SOFTWARE (fc5) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2007 by cisco Systems, Inc. Compiled Tue 24-Jul-07 14:47 by stshen Image text-base: 0x8000816C, data-base: 0x81455D6C ROM: System Bootstrap, Version 12.2(7r)XM2, RELEASE SOFTWARE (fc1) rtr uptime is 56 minutes System returned to ROM by reload at 13:24:34 UTC Fri Nov 7 2008 System restarted at 13:00:30 UTC Fri Nov 7 2008 System image file is "flash:c1700-ipvoice-mz.123-23.bin" cisco 1751-V (MPC860P) processor (revision 0x600) with 59025K/6511K bytes of memory. Processor board ID FOC10295J6R (815324709), with hardware revision 0000 MPC860P processor: part number 5, mask 2 Bridging software. X.25 software, Version 3.0.0. 1 FastEthernet/IEEE 802.3 interface(s) 1 ATM network interface(s) 2 Voice FXS interface(s) 32K bytes of non-volatile configuration memory. 32768K bytes of processor board System flash (Read/Write) Configuration register is 0x2102 rtr#sh run Building configuration... Current configuration : 1405 bytes ! ! version 12.3 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname rtr ! boot-start-marker boot-end-marker ! enable secret 5 *** enable password *** ! mmi polling-interval 60 no mmi auto-configure no mmi pvc mmi snmp-timeout 180 voice-card 2 ! no aaa new-model ip subnet-zero ip cef ! ! ! ! ! voice call send-alert ! voice service pots ! voice service voip sip ! ! ! ! ! ! ! ! ! ! ! ! ! ! interface ATM0/0 no ip address shutdown no atm ilmi-keepalive dsl operating-mode auto ! interface FastEthernet0/0 ip address XX.XX.XX.210 255.255.255.252 speed auto full-duplex ! ip classless ip route XX.XX.XX.44 255.255.255.252 XX.XX.XX.209 no ip http server ! ! voice-port 2/0 no battery-reversal cptone RU station-id number *******697 ! voice-port 2/1 station-id number *******697 ! ! ! dial-peer voice 9 voip destination-pattern .T session protocol sipv2 session target sip-server session transport udp dtmf-relay rtp-nte codec g711alaw no vad ! dial-peer voice 5 pots destination-pattern *******697 port 2/0 forward-digits 0 ! sip-ua sip-server ipv4:XX.XX.XX.46:5060 ! ! line con 0 line aux 0 line vty 0 4 password *** login ! end Вставить ник Quote
Voicemaster Posted April 20, 2011 Posted April 20, 2011 Смените провайдера, бо идиотство. Хотя кошку вашу, вероятно, можно научить. . Вставить ник Quote
Aleck_K Posted April 22, 2011 Posted April 22, 2011 циска отвечает 183 Session Progress вместо 180 Ringing В циске настраивается, как будут обрабатываться провижн-респонсы. Точную команду не подскажу, но поищите по ключевым словам 100rel provision response disable Вставить ник Quote
Kondor Posted April 25, 2011 Posted April 25, 2011 (edited) Попробуйте посмотрите в сторону progress indication в dial-peer: progress_ind setup enable 3 И почитайте здесь - http://www.cisco.com/en/US/docs/ios/12_1t/12_1t5/feature/guide/dt4t323.html#wp1045359 Edited April 25, 2011 by Kondor Вставить ник Quote
ntil Posted April 26, 2011 Author Posted April 26, 2011 Попробуйте посмотрите в сторону progress indication в dial-peer: progress_ind setup enable 3 И почитайте здесь - http://www.cisco.com....html#wp1045359 Да читал я этот документ (и даже понял его :) ) еще до того, как обратится за помощью к форумчанам. не помогает все это. выписал памяти, буду ставить последний наявный ИОС ... Смените провайдера, бо идиотство. ниразу даже не идиотство. просто политика такая. а менять немогу - номера привязаны. Вставить ник Quote
Deac Posted April 27, 2011 Posted April 27, 2011 Да не решается это средствами самой железки. Нужно внешнее средство, типа ring_insert_callid() у kamailio, ну и в CISCO-вском софте есть подобное. Вставить ник Quote
rover-lt Posted April 28, 2011 Posted April 28, 2011 собственно при входящем звонке с SIP циска отвечает 183 Session Progress вместо 180 Ringing а мой SIP провайдер не пропускает РТП с рингбеком - т.е. нада както заставить циску слать 180. Может просто ртп не пропускает, а не 183? Тады можно sip-ua disable-early-media session progress это далеко не ringing. Рингинга вообще может не быть, а session progress будет. Вставить ник Quote
ntil Posted April 28, 2011 Author Posted April 28, 2011 disable-early-media disable-early-media не полная ком*** disable-early-media 180 - делает совсем не то, отключает фмтп секцию в ответе 180 рингинг. может действительно нельзя отключить 183 ? Вставить ник Quote
All is not what it seems Posted April 29, 2012 Posted April 29, 2012 Router(conf-serv-sip)#block ? 180 Block 180 response to Invite 181 Block 181 response to Invite 183 Block 183 response to Invite Вставить ник Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.