Cezar1209 Posted February 15, 2011 · Report post Отформатирована flash на ней нет никаких ios-ов команды ограничены помогите кто знает как это сделать? Share this post Link to post Share on other sites
Cezar1209 Posted February 16, 2011 (edited) · Report post Вот что говорит роммон помогите! Если кто знает tftp клиент вроде правильно настроен вот только фаил чуть не так называется как исправить тот какой по умолчанию не знаю! Xmodem file system is available. flashfs[0]: 1 files, 1 directories flashfs[0]: 0 orphaned files, 0 orphaned directories flashfs[0]: Total bytes: 7741440 flashfs[0]: Bytes used: 1536 flashfs[0]: Bytes available: 7739904 flashfs[0]: flashfs fsck took 11 seconds. Reading cookie from flash parameter block...done. Base ethernet MAC Address: 00:16:c7:16:c4:53 Initializing ethernet port 0... Reset ethernet port 0... Reset done! ethernet link up, 100 mbps, full-duplex Ethernet port 0 initialized: link is up Ethernet port 0 initialized: link is up button pressed for 20 seconds process_config_recovery: set IP address and config to default 10.0.0.1 process_config_recovery: image recovery image_recovery: Download default IOS tar image tftp://255.255.255.255/c1200-k9w7 -tar.default examining image...tftp://255.255.255.255/c1200-k9w7-tar.default: no such file or directory ERROR: Failed to open archive file tftp://255.255.255.255/c1200-k9w7-tar.default The system is unable to boot automatically because there are no bootable files to boot. ap: ap: version C1200 Boot Loader (C1200-BOOT-M) Version 12.3(2)JA4, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Compiled Mon 13-Jun-05 15:39 by ssearch Error opening flash:/update/info (no such file or directory) ERROR: Image is not a valid IOS image archive. The system is unable to boot automatically because there are no bootable files to boot. Edited February 16, 2011 by Cezar1209 Share this post Link to post Share on other sites
Cezar1209 Posted February 16, 2011 · Report post Вот что говорит роммон помогите!Если кто знает tftp клиент вроде правильно настроен вот только фаил чуть не так называется как исправить тот какой по умолчанию не знаю! Xmodem file system is available. flashfs[0]: 1 files, 1 directories flashfs[0]: 0 orphaned files, 0 orphaned directories flashfs[0]: Total bytes: 7741440 flashfs[0]: Bytes used: 1536 flashfs[0]: Bytes available: 7739904 flashfs[0]: flashfs fsck took 11 seconds. Reading cookie from flash parameter block...done. Base ethernet MAC Address: 00:16:c7:16:c4:53 Initializing ethernet port 0... Reset ethernet port 0... Reset done! ethernet link up, 100 mbps, full-duplex Ethernet port 0 initialized: link is up Ethernet port 0 initialized: link is up button pressed for 20 seconds process_config_recovery: set IP address and config to default 10.0.0.1 process_config_recovery: image recovery image_recovery: Download default IOS tar image tftp://255.255.255.255/c1200-k9w7 -tar.default examining image...tftp://255.255.255.255/c1200-k9w7-tar.default: no such file or directory ERROR: Failed to open archive file tftp://255.255.255.255/c1200-k9w7-tar.default The system is unable to boot automatically because there are no bootable files to boot. ap: ap: version C1200 Boot Loader (C1200-BOOT-M) Version 12.3(2)JA4, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Compiled Mon 13-Jun-05 15:39 by ssearch Error opening flash:/update/info (no such file or directory) ERROR: Image is not a valid IOS image archive. The system is unable to boot automatically because there are no bootable files to boot. Нашел решение!! Если сому интересно команда xmodem! copy xmodem flash:ios.bin Share this post Link to post Share on other sites
Cezar1209 Posted February 16, 2011 · Report post Тему можно закрывать! Share this post Link to post Share on other sites
