[duda6753]

Есть железка Foundry ( Brocade) BigIron BI-RX4.

telnet@BigIron RX-4 Router>sh ver

==========================================================================

HW: BigIron RX Router

BigIron RX-4 CHASSIS (Serial #: SA23050013, Part #: 31550-000B)

RX-BI-SFM1 Switch Fabric Module 1 (Serial #: SA15072005, Part #: 35548-000D)

FE 1: Type fe200, Version 2

RX-BI-SFM1 Switch Fabric Module 2 (Serial #: SA04071707, Part #: 35548-000D)

FE 1: Type fe200, Version 2

RX-BI-SFM1 Switch Fabric Module 3 (Serial #: SA07071216, Part #: 35548-000D)

FE 1: Type fe200, Version 2

==========================================================================

SL M1: RX-BI-MR2 Management Module (High Value) Active (Serial #: SA12061609, Part #: 31524-000B):

Boot : Version 2.7.3T145 Copyright © 1996-2010 Brocade Communications Systems, Inc.

Compiled on Aug 30 2010 at 16:10:26 labeled as rmb02703

(439582 bytes) from boot flash

Monitor : Version 2.7.3T145 Copyright © 1996-2010 Brocade Communications Systems, Inc.

Compiled on Aug 30 2010 at 16:10:26 labeled as rmb02703

(439582 bytes) from code flash

IronWare : Version 2.7.3T143 Copyright © 1996-2010 Brocade Communications Systems, Inc.

Compiled on Aug 30 2010 at 16:16:10 labeled as rmpr02703

(4538608 bytes) from Primary

Board ID : 00 MBRIDGE Revision : 21

916 MHz Power PC processor (version 8003/0101) 166 MHz bus

512 KB Boot Flash (AM29LV040B), 32 MB Code Flash (MT28F128J3)

2048 MB DRAM

Active Management uptime is 3 hours 25 seconds

==========================================================================

SL M2: RX-BI-MR2 Management Module (High Value) Standby (Serial #: SA18071046, Part #: 35524-001C):

Boot : Version 2.7.3T145 Copyright © 1996-2010 Brocade Communications Systems, Inc.

Compiled on Aug 30 2010 at 16:10:26 labeled as rmb02703

(439582 bytes) from boot flash

Monitor : Version 2.7.3T145 Copyright © 1996-2010 Brocade Communications Systems, Inc.

Compiled on Aug 30 2010 at 16:10:26 labeled as rmb02703

(439582 bytes) from code flash

IronWare : Version 2.7.3T143 Copyright © 1996-2010 Brocade Communications Systems, Inc.

Compiled on Aug 30 2010 at 16:16:10 labeled as rmpr02703

(4538608 bytes) from Primary

Board ID : 00 MBRIDGE Revision : 21

916 MHz Power PC processor (version 8003/0101) 166 MHz bus

512 KB Boot Flash (AM29LV040B), 32 MB Code Flash (MT28F128J3)

2048 MB DRAM

Standby Management uptime is 2 hours 59 minutes 42 seconds

==========================================================================

SL 1: RX-BI-24C 24-port 1 GbE Copper Module (Serial #: SA04080474, Part #: 35521-003B)

Boot : Version 2.7.2fT155 Copyright © 1996-2010 Brocade Communications Systems, Inc.

Compiled on Mar 22 2010 at 23:08:06 labeled as rlb02702f

(306154 bytes) from boot flash

Monitor : Version 2.7.3T155 Copyright © 1996-2010 Brocade Communications Systems, Inc.

Compiled on Aug 30 2010 at 16:10:20 labeled as rlb02703

(307473 bytes) from code flash

IronWare : Version 2.7.3T157 Copyright © 1996-2010 Brocade Communications Systems, Inc.

Compiled on Aug 30 2010 at 16:19:52 labeled as rlp02703

(2333806 bytes) from Primary

FAP 1 version: 3

FAP 2 version: 3

FAP 3 version: 0

FAP 4 version: 0

660 MHz Power PC processor 440GP (version 8020/0020) 330 MHz bus

512 KB Boot Flash (AM29LV040B), 16 MB Code Flash (MT28F640J3)

512 MB DRAM, 8 KB SRAM, 0 Bytes BRAM

LP Slot 1 uptime is 2 hours 59 minutes 42 seconds

==========================================================================

SL 2: RX-BI-24F 24-port 1 GbE Module (Serial #: SA09060532, Part #: 31520-102C)

Boot : Version 2.4.0eT155 Copyright © 1996-2010 Brocade Communications Systems, Inc.

Compiled on Jan 31 2008 at 14:55:32 labeled as rlb02400e

(249179 bytes) from boot flash

Monitor : Version 2.7.3T155 Copyright © 1996-2010 Brocade Communications Systems, Inc.

Compiled on Aug 30 2010 at 16:10:20 labeled as rlb02703

(307473 bytes) from code flash

IronWare : Version 2.7.3T157 Copyright © 1996-2010 Brocade Communications Systems, Inc.

Compiled on Aug 30 2010 at 16:19:52 labeled as rlp02703

(2333806 bytes) from Primary

FAP 1 version: 2

FAP 2 version: 2

FAP 3 version: 0

FAP 4 version: 0

660 MHz Power PC processor 440GP (version 8020/0020) 330 MHz bus

512 KB Boot Flash (AM29LV040B), 16 MB Code Flash (MT28F640J3)

512 MB DRAM, 8 KB SRAM, 0 Bytes BRAM

LP Slot 2 uptime is 2 hours 59 minutes 43 seconds

==========================================================================

All show version done

 

И есть потребность на этой железке нарезать полосу жирным и не только клиентам по их vlan-id.

Но при попытке сконфигурить это в транковом порту, через который проходят пакеты с указанным vlan-id, наткнулись на вот такие грабли:

 

зашли на требуемый транковый порт и пытаемся организовать нарезку на входе от клиента

telnet@BigIron RX-4 Router(config-if-e1000-2/14)#rate-limit input vlan-id ?

DECIMAL VLAN ID

 

Это работает. Но при попытке сделать нарезку к клиенту получаем отлуп:

telnet@BigIron RX-4 Router(config-if-e1000-2/14)#rate-limit output ?

DECIMAL Average rate in bits/sec

telnet@BigIron RX-4 Router(config-if-e1000-2/14)#rate-limit output

 

 

Подскажите, плз, какие варианты возможны в данной ситуации для достижения озвученного ранее требования по нарезке клиенту в обе стороны, если речь идет о транковом порту.

Попутно хочу поинтересоваться, есть ли у HP на сайте софт под мою железку, и как она называется по версии HP.

 

Заранее всем спасибо.