Jump to content
Калькуляторы

SUP720 циклическая перезагрузка после BOOT SYSTEM TFTP

Имеем 7609 с WS-SUP720-3B в bootflash:s72033-pk9sv-mz.122-17d.SXB11a.bin

Загружался нормально.

Захотелось IOS обновить. Залили в компактфлэш disk1:s72033-adventerprisek9_wan-mz.122-18.SXF6.bin

прописал: boot system disk1:s72033-adventerprisek9_wan-mz.122-18.SXF6.bin

При перезагрузке получил

 

Autoboot executing command: "boot disk1:s72033-adventerprisek9_wan-mz.122-18.SXF6.bin"

Loading image, please wait ...

 

open: file "c7200-atafslib-m" not found monlib.open(): Open Error = -1

loadprog: error - on file open cannot load the monitor library "disk1:%c7200-atafslib-m" from device: PCMCIA Disk 1

loadprog: error - on file open boot: cannot load "disk1:s72033-adventerprisek9_wan-mz.122-18.SXF6.bin"

 

System Bootstrap, Version 8.4(2) Release

Copyright © 1994-2005 by cisco Systems, Inc.

Cat6k-Sup720/SP processor with 524288 Kbytes of main memory

 

Autoboot executing command: "boot bootflash:"

Ладно... ну нету пока library "disk1:%c7200-atafslib-m"

Пробуем загрузиться по TFTP

меняем boot system на:

boot system tftp s72033-adventerprisek9_wan-mz.122-18.SXF6.bin 10.17.255.7

 

Перезагружаем еще разок. И опаньки - циклическая перезагрузка

 

00:09:57: %SYS-SP-5-RELOAD: Reload requested

00:09:57: %OIR-SP-6-CONSOLE: Changing console ownership to switch processor

 

System Bootstrap, Version 8.4(2) Release

Copyright © 1994-2005 by cisco Systems, Inc.

Cat6k-Sup720/SP processor with 524288 Kbytes of main memory

 

Autoboot executing command: "boot tftp:s72033-adventerprisek9_wan-mz.122-18.SXF6.bin 10.17.255.7"

Loading image, please wait ...

 

Invalid device specified

Booting from default device

 

Self decompressing the image : #################################################

################################################################################

################################################################################

############################################################################ [OK]

 

%SYSTEM-1-INITFAIL: Network boot is not supported.

 

 

System Bootstrap, Version 8.4(2) Release

Copyright © 1994-2005 by cisco Systems, Inc.

Cat6k-Sup720/SP processor with 524288 Kbytes of main memory

 

Autoboot executing command: "boot tftp:s72033-adventerprisek9_wan-mz.122-18.SXF6.bin 10.17.255.7"

Loading image, please wait ...

 

Invalid device specified

Booting from default device

 

Self decompressing the image : #################################################

################################################################################

################################################################################

############################################################################ [OK]

 

%SYSTEM-1-INITFAIL: Network boot is not supported.

И в ROMMON не могу попасть!

Нажимал Break и Ctrl+Break во время загрузки - бесполезно - цикл!

Кто чего подскажет?..

 

Share this post


Link to post
Share on other sites

Дааа. Тихо сам с собою :=)

Здесь таже проблема

И BREAK нужно жать здесь

 

%SYSTEM-1-INITFAIL: Network boot is not supported.

 

System Bootstrap, Version 8.4(2) Release

Copyright © 1994-2005 by cisco Systems, Inc.

Cat6k-Sup720/SP processor with 524288 Kbytes of main memory

 

Autoboot executing command: "boot bootflash:s72033-ipservicesk9-mz.122-33.SXI3.bin"

Loading image, please wait ...

 

Invalid device specified

Booting from default devic

 

==========================================================

HERE I HAVE TO SEND A BREAK OTHERWISE IT WILL LOOP FOREVER WITH ERROR

 

%SYSTEM-1-INITFAIL: Network boot is not supported.

 

And i dont know wht it uses bootvar string "boot bootflash:s72033-ipservicesk9-mz.122-33.SXI3.bin"

 

============================================================

=================================================================

 

monitor: command "boot" aborted due to user interrupt

rommon 1 > boot

 

Initializing ATA monitor library...

string is bootdisk:s72033-ipservicesk9-mz.122-33.SXI3.bin

Loading image, please wait ...

Share this post


Link to post
Share on other sites

Снова сам себе посоветую...

open: file "c7200-atafslib-m" not found monlib.open(): Open Error = -1

loadprog: error - on file open cannot load the monitor library "disk1:%c7200-atafslib-m" from device: PCMCIA Disk 1

loadprog: error - on file open boot: cannot load "disk1:s72033-adventerprisek9_wan-mz.122-18.SXF6.bin"

В слоте оказался компактфлэш от 7200 кошки. IOS на нее записался нормально, а вот при загрузке файловая система не видна.

Вылечилось форматированием компактфлэша disk1: в SUP-е.

И все загрузилось и заработало :-/~

Share this post


Link to post
Share on other sites

На реальные проблемы трудно что-то советовать, вот вам и не пишут, но за ситуацией следят )

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this