[anton-ny]

FREEBSD

Как локалку по нат направить через один интерфейс (ext_all), а несколько отдельных клиентов по БИнату через другой (ext_binat)?

Привожу свой pf.conf

В итоге вся локалка на выход ломится через (ext_all), включая БИнат-ных клиентов. На вход естественно видно и тех и тех.

 

ext_all="ext1" 
ext_binat="ext0" 
int="int0" 
gw_all="333.333.222.1" 
gw_binat="333.333.333.1" 
tcp_svc="22" 

table <lan> { 192.168.0.0/16 } 

set optimization normal 

scrub in all 
set skip on lo0 

nat on $ext_all from <lan> to !<lan> -> 333.333.222.0/24  source-hash 
binat on $ext_binat inet from 192.168.1.5 to any -> 333.333.333.2 

block in 

antispoof quick for $int 

pass in on $ext_all reply-to ($ext_all $gw_all) inet proto icmp to ($ext_all) tag EXT_IF_A icmp-type echoreq code 0 
pass in on $ext_all inet proto icmp from ($ext_all:network) to ($ext_all) icmp-type echoreq code 0 
pass in on $ext_binat reply-to ($ext_binat $gw_binat) inet proto icmp to ($ext_binat) tag EXT_IF_B icmp-type echoreq code 0 
pass in on $ext_binat inet proto icmp from ($ext_binat:network) to ($ext_binat) icmp-type echoreq code 0 
pass in on $ext_all reply-to ($ext_all $gw_all) inet proto tcp to ($ext_all) port { $tcp_svc } 
pass in on $ext_all inet proto tcp from ($ext_all:network) to ($ext_all) port { $tcp_svc } 
pass in on $ext_binat reply-to ($ext_binat $gw_binat) inet proto tcp to ($ext_binat) port { $tcp_svc } 
pass in on $ext_binat inet proto tcp from ($ext_binat:network) to ($ext_binat) port { $tcp_svc } 
pass in quick from ($ext_all:network) tagged EXT_IF_A keep state 
pass in quick reply-to ($ext_all $gw_all) tagged EXT_IF_A keep state 
pass in quick from ($ext_binat:network) tagged EXT_IF_B keep state 
pass in quick reply-to ($ext_binat $gw_binat) tagged EXT_IF_B keep state 
pass out inet from (self:network) 
pass in inet proto icmp to (self:network) 
pass quick on $int 
pass out route-to ($ext_all $gw_all) inet from ($ext_all) keep state 
pass out route-to ($ext_binat $gw_binat) inet from ($ext_binat) keep state 
pass out inet from { $ext_all $ext_binat } to (self:network)

[anton-ny]

ап!

[anton-ny]

Проблему, может и не корректно, но решил добавлением правил:

pass in on $int route-to ($ext_all $gw_all) from <lan> to !<lan> keep state
pass in on $int route-to ($ext_binat $gw_binat) from <lan> to !<lan> keep state