Jump to content

Hostapd REAUTH_TIMER

X-Serge
 Share

Recommended Posts

X-Serge

X-Serge

Posted
Posted

Привет всем!

Пытаюсь завести hostapd с 802.1x через драйвер wired

Ubuntu 7.10+Debian 4.0r0

Из репозиториев ли я ставлю hostapd или компилю из исходников разных версий, всё равно получаю

одно и то же

 

 

1) подключаю по схеме ( compex ps2208B или любой L2)

wired_eth <-----> hub <---------> client_eth

& получаю REAUTH_TIMER при любых методах авторизации |md5, peap or tls|

 

________________________________________________________________________________

_____________

Configuration file: /etc/hostapd/hostapd.conf.peapmschap

1204615804.443995: ctrl_interface_group=0

1204615804.447058: TLS: Trusted root certificate(s) loaded

Opening raw packet socket for ifindex 2

BSS count 1, BSSID mask ff:ff:ff:ff:ff:ff (0 bits)

1204615804.499185: eth0: IEEE 802.11 Fetching hardware channel/rate support not supported.

1204615804.499197: Flushing old station entries

1204615804.499200: Deauthenticate all stations

Using interface eth0 with hwaddr 00:13:8f:b7:54:8d and ssid 'test'

1204615804.499286: eth0: Setup of interface done.

Got DHCP broadcast packet from 00:00:f0:73:ad:7c

Data frame from unknown STA 00:00:f0:73:ad:7c - adding a new STA

New STA

1204615819.204563: eth0: STA 00:00:f0:73:ad:7c IEEE 802.1X: start authentication

1204615819.204569: EAP: State machine created

1204615819.204573: IEEE 802.1X: 00:00:f0:73:ad:7c AUTH_PAE entering state INITIALIZE

1204615819.204579: IEEE 802.1X: 00:00:f0:73:ad:7c BE_AUTH entering state INITIALIZE

1204615819.204582: IEEE 802.1X: 00:00:f0:73:ad:7c REAUTH_TIMER entering state INITIALIZE

1204615819.204587: IEEE 802.1X: 00:00:f0:73:ad:7c AUTH_KEY_TX entering state NO_KEY_TRANSMIT

1204615819.204590: IEEE 802.1X: 00:00:f0:73:ad:7c KEY_RX entering state NO_KEY_RECEIVE

1204615819.204594: IEEE 802.1X: 00:00:f0:73:ad:7c CTRL_DIR entering state IN_OR_BOTH

1204615819.204598: IEEE 802.1X: 00:00:f0:73:ad:7c AUTH_PAE entering state INITIALIZE

1204615819.204601: IEEE 802.1X: 00:00:f0:73:ad:7c BE_AUTH entering state IDLE

1204615819.204604: IEEE 802.1X: 00:00:f0:73:ad:7c KEY_RX entering state NO_KEY_RECEIVE

1204615819.204607: IEEE 802.1X: 00:00:f0:73:ad:7c CTRL_DIR entering state FORCE_BOTH

1204615819.204610: IEEE 802.1X: 00:00:f0:73:ad:7c AUTH_PAE entering state INITIALIZE

1204615819.204613: IEEE 802.1X: 00:00:f0:73:ad:7c KEY_RX entering state NO_KEY_RECEIVE

1204615819.204628: IEEE 802.1X: 00:00:f0:73:ad:7c AUTH_PAE entering state DISCONNECTED

1204615819.204634: eth0: STA 00:00:f0:73:ad:7c IEEE 802.1X: unauthorizing port

1204615819.204637: IEEE 802.1X: 00:00:f0:73:ad:7c REAUTH_TIMER entering state INITIALIZE

1204615819.204641: IEEE 802.1X: 00:00:f0:73:ad:7c AUTH_PAE entering state RESTART

IEEE 802.1X: Integrated EAP server in use - do not generate EAP-Request/Identity

1204615819.204644: IEEE 802.1X: 00:00:f0:73:ad:7c REAUTH_TIMER entering state INITIALIZE

1204615819.204648: IEEE 802.1X: 00:00:f0:73:ad:7c REAUTH_TIMER entering state INITIALIZE

1204615819.204654: EAP: EAP entering state INITIALIZE

1204615819.204657: EAP: EAP entering state SELECT_ACTION

1204615819.204660: EAP: getDecision: no identity known yet -> CONTINUE

1204615819.204662: EAP: EAP entering state PROPOSE_METHOD

1204615819.204665: EAP: getNextMethod: vendor 0 type 1

1204615819.204668: EAP: EAP entering state METHOD_REQUEST

1204615819.204672: EAP: building EAP-Request: Identifier 103

1204615819.204675: EAP: EAP entering state SEND_REQUEST

1204615819.204678: EAP: eapReqData -> EAPOL - hexdump(len=5): 01 67 00 05 01

1204615819.204684: EAP: EAP entering state IDLE

1204615819.204686: IEEE 802.1X: 00:00:f0:73:ad:7c AUTH_PAE entering state CONNECTING

1204615819.204690: IEEE 802.1X: 00:00:f0:73:ad:7c REAUTH_TIMER entering state INITIALIZE

1204615819.204693: IEEE 802.1X: 00:00:f0:73:ad:7c AUTH_PAE entering state AUTHENTICATING

1204615819.204696: IEEE 802.1X: 00:00:f0:73:ad:7c BE_AUTH entering state REQUEST

IEEE 802.1X: Sending EAP Packet to 00:00:f0:73:ad:7c (identifier 103)

1204615819.204711: IEEE 802.1X: 00:00:f0:73:ad:7c REAUTH_TIMER entering state INITIALIZE

1204615819.204716: IEEE 802.1X: 00:00:f0:73:ad:7c REAUTH_TIMER entering state INITIALIZE

Got DHCP broadcast packet from 00:00:f0:73:ad:7c

1204615820.210136: IEEE 802.1X: 00:00:f0:73:ad:7c REAUTH_TIMER entering state INITIALIZE

1204615821.210198: IEEE 802.1X: 00:00:f0:73:ad:7c REAUTH_TIMER entering state INITIALIZE

1204615822.210261: IEEE 802.1X: 00:00:f0:73:ad:7c REAUTH_TIMER entering state INITIALIZE

1204615823.210324: IEEE 802.1X: 00:00:f0:73:ad:7c REAUTH_TIMER entering state INITIALIZE

1204615824.210387: IEEE 802.1X: 00:00:f0:73:ad:7c REAUTH_TIMER entering state INITIALIZE

1204615825.220450: IEEE 802.1X: 00:00:f0:73:ad:7c REAUTH_TIMER entering state INITIALIZE

1204615826.220513: IEEE 802.1X: 00:00:f0:73:ad:7c REAUTH_TIMER entering state INITIALIZE

1204615827.220576: IEEE 802.1X: 00:00:f0:73:ad:7c REAUTH_TIMER entering state INITIALIZE

1204615828.220639: IEEE 802.1X: 00:00:f0:73:ad:7c REAUTH_TIMER entering state INITIALIZE

1204615859.222590: IEEE 802.1X: 00:00:f0:73:ad:7c REAUTH_TIMER entering state INITIALIZE

1204615860.222653: IEEE 802.1X: 00:00:f0:73:ad:7c REAUTH_TIMER entering state INITIALIZE

1204615861.222716: IEEE 802.1X: 00:00:f0:73:ad:7c REAUTH_TIMER entering state INITIALIZE

1204615862.222778: IEEE 802.1X: 00:00:f0:73:ad:7c REAUTH_TIMER entering state INITIALIZE

1204615863.222841: IEEE 802.1X: 00:00:f0:73:ad:7c REAUTH_TIMER entering state INITIALIZE

1204615864.222904: IEEE 802.1X: 00:00:f0:73:ad:7c REAUTH_TIMER entering state INITIALIZE

1204615865.222967: IEEE 802.1X: 00:00:f0:73:ad:7c REAUTH_TIMER entering state INITIALIZE

1204615866.223030: IEEE 802.1X: 00:00:f0:73:ad:7c REAUTH_TIMER entering state INITIALIZE

1204615867.223093: IEEE 802.1X: 00:00:f0:73:ad:7c REAUTH_TIMER entering state INITIALIZE

1204615868.223156: IEEE 802.1X: 00:00:f0:73:ad:7c REAUTH_TIMER entering state INITIALIZE

1204615869.223219: IEEE 802.1X: 00:00:f0:73:ad:7c REAUTH_TIMER entering state INITIALIZE

Got DHCP broadcast packet from 00:00:f0:73:ad:7c

Got DHCP broadcast packet from 00:00:f0:73:ad:7c

1204615897.244982: IEEE 802.1X: 00:00:f0:73:ad:7c REAUTH_TIMER entering state INITIALIZE

1204615898.245045: IEEE 802.1X: 00:00:f0:73:ad:7c REAUTH_TIMER entering state INITIALIZE

1204615899.245108: IEEE 802.1X: 00:00:f0:73:ad:7c REAUTH_TIMER entering state INITIALIZE

1204615900.245170: IEEE 802.1X: 00:00:f0:73:ad:7c REAUTH_TIMER entering state INITIALIZE

1204615901.245234: IEEE 802.1X: 00:00:f0:73:ad:7c REAUTH_TIMER entering state INITIALIZE

Signal 2 received - terminating

Removing station 00:00:f0:73:ad:7c

1204615901.457257: EAP: State machine removed

1204615901.457261: Flushing old station entries

1204615901.457264: Deauthenticate all stations

________________________________________________________________________________

_____________

 

 

2) Но если подключаю напрямую, то все ок!

wired_eth <-----> client_eth |md5, peap or tls|

________________________________________________________________________________

_____________

Configuration file: /etc/hostapd/hostapd.conf.peapmschap

eapol_version=1

Opening raw packet socket for ifindex 2

BSS count 1, BSSID mask ff:ff:ff:ff:ff:ff (0 bits)

eth0: IEEE 802.11 Fetching hardware channel/rate support not supported.

Flushing old station entries

Deauthenticate all stations

Using interface eth0 with hwaddr 00:13:8f:b7:54:8d and ssid 'test'

eth0: Setup of interface done.

Got DHCP broadcast packet from 00:00:f0:73:ad:7c

Data frame from unknown STA 00:00:f0:73:ad:7c - adding a new STA

New STA

eth0: STA 00:00:f0:73:ad:7c IEEE 802.1X: start authentication

EAP: State machine created

IEEE 802.1X: 00:00:f0:73:ad:7c AUTH_PAE entering state INITIALIZE

IEEE 802.1X: 00:00:f0:73:ad:7c BE_AUTH entering state INITIALIZE

IEEE 802.1X: 00:00:f0:73:ad:7c REAUTH_TIMER entering state INITIALIZE

IEEE 802.1X: 00:00:f0:73:ad:7c AUTH_KEY_TX entering state NO_KEY_TRANSMIT

IEEE 802.1X: 00:00:f0:73:ad:7c KEY_RX entering state NO_KEY_RECEIVE

IEEE 802.1X: 00:00:f0:73:ad:7c CTRL_DIR entering state IN_OR_BOTH

IEEE 802.1X: 00:00:f0:73:ad:7c AUTH_PAE entering state INITIALIZE

IEEE 802.1X: 00:00:f0:73:ad:7c BE_AUTH entering state IDLE

IEEE 802.1X: 00:00:f0:73:ad:7c KEY_RX entering state NO_KEY_RECEIVE

IEEE 802.1X: 00:00:f0:73:ad:7c CTRL_DIR entering state FORCE_BOTH

IEEE 802.1X: 00:00:f0:73:ad:7c AUTH_PAE entering state INITIALIZE

IEEE 802.1X: 00:00:f0:73:ad:7c KEY_RX entering state NO_KEY_RECEIVE

IEEE 802.1X: 00:00:f0:73:ad:7c AUTH_PAE entering state DISCONNECTED

eth0: STA 00:00:f0:73:ad:7c IEEE 802.1X: unauthorizing port

IEEE 802.1X: 00:00:f0:73:ad:7c REAUTH_TIMER entering state INITIALIZE

IEEE 802.1X: 00:00:f0:73:ad:7c AUTH_PAE entering state RESTART

IEEE 802.1X: Integrated EAP server in use - do not generate EAP-Request/Identity

IEEE 802.1X: 00:00:f0:73:ad:7c REAUTH_TIMER entering state INITIALIZE

IEEE 802.1X: 00:00:f0:73:ad:7c REAUTH_TIMER entering state INITIALIZE

EAP: EAP entering state INITIALIZE

EAP: EAP entering state SELECT_ACTION

EAP: getDecision: no identity known yet -> CONTINUE

EAP: EAP entering state PROPOSE_METHOD

EAP: getNextMethod: vendor 0 type 1

EAP: EAP entering state METHOD_REQUEST

EAP: building EAP-Request: Identifier 103

EAP: EAP entering state SEND_REQUEST

EAP: eapReqData -> EAPOL - hexdump(len=5): 01 67 00 05 01

EAP: EAP entering state IDLE

IEEE 802.1X: 00:00:f0:73:ad:7c AUTH_PAE entering state CONNECTING

IEEE 802.1X: 00:00:f0:73:ad:7c REAUTH_TIMER entering state INITIALIZE

IEEE 802.1X: 00:00:f0:73:ad:7c AUTH_PAE entering state AUTHENTICATING

IEEE 802.1X: 00:00:f0:73:ad:7c BE_AUTH entering state REQUEST

IEEE 802.1X: Sending EAP Packet to 00:00:f0:73:ad:7c (identifier 103)

IEEE 802.1X: 00:00:f0:73:ad:7c REAUTH_TIMER entering state INITIALIZE

IEEE 802.1X: 00:00:f0:73:ad:7c REAUTH_TIMER entering state INITIALIZE

Received EAPOL packet

IEEE 802.1X: 46 bytes from 00:00:f0:73:ad:7c

IEEE 802.1X: version=1 type=1 length=0

ignoring 42 extra octets after IEEE 802.1X packet

eth0: STA 00:00:f0:73:ad:7c IEEE 802.1X: received EAPOL-Start from STA

IEEE 802.1X: 00:00:f0:73:ad:7c AUTH_PAE entering state ABORTING

IEEE 802.1X: 00:00:f0:73:ad:7c BE_AUTH entering state INITIALIZE

eth0: STA 00:00:f0:73:ad:7c IEEE 802.1X: aborting authentication

IEEE 802.1X: 00:00:f0:73:ad:7c REAUTH_TIMER entering state INITIALIZE

IEEE 802.1X: 00:00:f0:73:ad:7c AUTH_PAE entering state RESTART

IEEE 802.1X: Integrated EAP server in use - do not generate EAP-Request/Identity

IEEE 802.1X: 00:00:f0:73:ad:7c BE_AUTH entering state IDLE

IEEE 802.1X: 00:00:f0:73:ad:7c REAUTH_TIMER entering state INITIALIZE

IEEE 802.1X: 00:00:f0:73:ad:7c REAUTH_TIMER entering state INITIALIZE

EAP: EAP entering state INITIALIZE

EAP: EAP entering state SELECT_ACTION

EAP: getDecision: no identity known yet -> CONTINUE

EAP: EAP entering state PROPOSE_METHOD

EAP: getNextMethod: vendor 0 type 1

EAP: EAP entering state METHOD_REQUEST

EAP: building EAP-Request: Identifier 198

EAP: EAP entering state SEND_REQUEST

EAP: eapReqData -> EAPOL - hexdump(len=5): 01 c6 00 05 01

EAP: EAP entering state IDLE

IEEE 802.1X: 00:00:f0:73:ad:7c AUTH_PAE entering state CONNECTING

IEEE 802.1X: 00:00:f0:73:ad:7c REAUTH_TIMER entering state INITIALIZE

IEEE 802.1X: 00:00:f0:73:ad:7c AUTH_PAE entering state AUTHENTICATING

IEEE 802.1X: 00:00:f0:73:ad:7c BE_AUTH entering state REQUEST

IEEE 802.1X: Sending EAP Packet to 00:00:f0:73:ad:7c (identifier 198)

IEEE 802.1X: 00:00:f0:73:ad:7c REAUTH_TIMER entering state INITIALIZE

IEEE 802.1X: 00:00:f0:73:ad:7c REAUTH_TIMER entering state INITIALIZE

Received EAPOL packet

IEEE 802.1X: 46 bytes from 00:00:f0:73:ad:7c

IEEE 802.1X: version=1 type=1 length=0

ignoring 42 extra octets after IEEE 802.1X packet

eth0: STA 00:00:f0:73:ad:7c IEEE 802.1X: received EAPOL-Start from STA

IEEE 802.1X: 00:00:f0:73:ad:7c AUTH_PAE entering state ABORTING

IEEE 802.1X: 00:00:f0:73:ad:7c BE_AUTH entering state INITIALIZE

eth0: STA 00:00:f0:73:ad:7c IEEE 802.1X: aborting authentication

IEEE 802.1X: 00:00:f0:73:ad:7c REAUTH_TIMER entering state INITIALIZE

IEEE 802.1X: 00:00:f0:73:ad:7c AUTH_PAE entering state RESTART

IEEE 802.1X: Integrated EAP server in use - do not generate EAP-Request/Identity

IEEE 802.1X: 00:00:f0:73:ad:7c BE_AUTH entering state IDLE

IEEE 802.1X: 00:00:f0:73:ad:7c REAUTH_TIMER entering state INITIALIZE

IEEE 802.1X: 00:00:f0:73:ad:7c REAUTH_TIMER entering state INITIALIZE

EAP: EAP entering state INITIALIZE

EAP: EAP entering state SELECT_ACTION

EAP: getDecision: no identity known yet -> CONTINUE

EAP: EAP entering state PROPOSE_METHOD

EAP: getNextMethod: vendor 0 type 1

EAP: EAP entering state METHOD_REQUEST

EAP: building EAP-Request: Identifier 105

EAP: EAP entering state SEND_REQUEST

EAP: eapReqData -> EAPOL - hexdump(len=5): 01 69 00 05 01

EAP: EAP entering state IDLE

IEEE 802.1X: 00:00:f0:73:ad:7c AUTH_PAE entering state CONNECTING

IEEE 802.1X: 00:00:f0:73:ad:7c REAUTH_TIMER entering state INITIALIZE

IEEE 802.1X: 00:00:f0:73:ad:7c AUTH_PAE entering state DISCONNECTED

eth0: STA 00:00:f0:73:ad:7c IEEE 802.1X: unauthorizing port

IEEE 802.1X: 00:00:f0:73:ad:7c REAUTH_TIMER entering state INITIALIZE

IEEE 802.1X: 00:00:f0:73:ad:7c AUTH_PAE entering state RESTART

IEEE 802.1X: Integrated EAP server in use - do not generate EAP-Request/Identity

IEEE 802.1X: 00:00:f0:73:ad:7c REAUTH_TIMER entering state INITIALIZE

IEEE 802.1X: 00:00:f0:73:ad:7c REAUTH_TIMER entering state INITIALIZE

EAP: EAP entering state INITIALIZE

EAP: EAP entering state SELECT_ACTION

EAP: getDecision: no identity known yet -> CONTINUE

EAP: EAP entering state PROPOSE_METHOD

EAP: getNextMethod: vendor 0 type 1

EAP: EAP entering state METHOD_REQUEST

EAP: building EAP-Request: Identifier 115

EAP: EAP entering state SEND_REQUEST

EAP: eapReqData -> EAPOL - hexdump(len=5): 01 73 00 05 01

EAP: EAP entering state IDLE

IEEE 802.1X: 00:00:f0:73:ad:7c AUTH_PAE entering state CONNECTING

IEEE 802.1X: 00:00:f0:73:ad:7c REAUTH_TIMER entering state INITIALIZE

IEEE 802.1X: 00:00:f0:73:ad:7c AUTH_PAE entering state AUTHENTICATING

IEEE 802.1X: 00:00:f0:73:ad:7c BE_AUTH entering state REQUEST

IEEE 802.1X: Sending EAP Packet to 00:00:f0:73:ad:7c (identifier 115)

IEEE 802.1X: 00:00:f0:73:ad:7c REAUTH_TIMER entering state INITIALIZE

IEEE 802.1X: 00:00:f0:73:ad:7c REAUTH_TIMER entering state INITIALIZE

IEEE 802.1X: 00:00:f0:73:ad:7c REAUTH_TIMER entering state INITIALIZE

IEEE 802.1X: 00:00:f0:73:ad:7c REAUTH_TIMER entering state INITIALIZE

Got DHCP broadcast packet from 00:00:f0:73:ad:7c

IEEE 802.1X: 00:00:f0:73:ad:7c REAUTH_TIMER entering state INITIALIZE

IEEE 802.1X: 00:00:f0:73:ad:7c REAUTH_TIMER entering state INITIALIZE

IEEE 802.1X: 00:00:f0:73:ad:7c REAUTH_TIMER entering state INITIALIZE

IEEE 802.1X: 00:00:f0:73:ad:7c REAUTH_TIMER entering state INITIALIZE

IEEE 802.1X: 00:00:f0:73:ad:7c REAUTH_TIMER entering state INITIALIZE

IEEE 802.1X: 00:00:f0:73:ad:7c REAUTH_TIMER entering state INITIALIZE

IEEE 802.1X: 00:00:f0:73:ad:7c REAUTH_TIMER entering state INITIALIZE

Received EAPOL packet

IEEE 802.1X: 46 bytes from 00:00:f0:73:ad:7c

IEEE 802.1X: version=1 type=0 length=6

ignoring 36 extra octets after IEEE 802.1X packet

EAP: code=2 identifier=115 length=6 (response)

eth0: STA 00:00:f0:73:ad:7c IEEE 802.1X: received EAP packet (code=2 id=115 len=6) from STA: EAP Response-Identity (1)

eth0: STA 00:00:f0:73:ad:7c IEEE 802.1X: STA identity '1'

IEEE 802.1X: 00:00:f0:73:ad:7c BE_AUTH entering state RESPONSE

EAP: EAP-Response received - hexdump(len=6): 02 73 00 06 01 31

IEEE 802.1X: 00:00:f0:73:ad:7c REAUTH_TIMER entering state INITIALIZE

IEEE 802.1X: 00:00:f0:73:ad:7c REAUTH_TIMER entering state INITIALIZE

EAP: EAP entering state RECEIVED

EAP: parseEapResp: rxResp=1 respId=115 respMethod=1 respVendor=0 respVendorMethod=0

EAP: EAP entering state INTEGRITY_CHECK

EAP: EAP entering state METHOD_RESPONSE

EAP-Identity: Peer identity - hexdump_ascii(len=1):

31 1

EAP: EAP entering state SELECT_ACTION

EAP: getDecision: another method available -> CONTINUE

EAP: EAP entering state PROPOSE_METHOD

EAP: getNextMethod: vendor 0 type 4

EAP: EAP entering state METHOD_REQUEST

EAP: building EAP-Request: Identifier 116

EAP-MD5: Challenge - hexdump(len=16): ee 94 27 95 1a 37 93 ed a2 14 78 af e5 d5 f1 06

EAP: EAP entering state SEND_REQUEST

EAP: eapReqData -> EAPOL - hexdump(len=22): 01 74 00 16 04 10 ee 94 27 95 1a 37 93 ed a2 14 78 af e5 d5 f1 06

EAP: EAP entering state IDLE

IEEE 802.1X: 00:00:f0:73:ad:7c BE_AUTH entering state REQUEST

IEEE 802.1X: Sending EAP Packet to 00:00:f0:73:ad:7c (identifier 116)

IEEE 802.1X: 00:00:f0:73:ad:7c REAUTH_TIMER entering state INITIALIZE

IEEE 802.1X: 00:00:f0:73:ad:7c REAUTH_TIMER entering state INITIALIZE

Received EAPOL packet

IEEE 802.1X: 46 bytes from 00:00:f0:73:ad:7c

IEEE 802.1X: version=1 type=0 length=23

ignoring 19 extra octets after IEEE 802.1X packet

EAP: code=2 identifier=116 length=23 (response)

eth0: STA 00:00:f0:73:ad:7c IEEE 802.1X: received EAP packet (code=2 id=116 len=23) from STA: EAP Response-MD5-Challenge (4)

IEEE 802.1X: 00:00:f0:73:ad:7c BE_AUTH entering state RESPONSE

EAP: EAP-Response received - hexdump(len=23): 02 74 00 17 04 10 da 3a 94 58 f0 b6 2b 43 9c 36 fe ad 85 74 7d 13 31

IEEE 802.1X: 00:00:f0:73:ad:7c REAUTH_TIMER entering state INITIALIZE

IEEE 802.1X: 00:00:f0:73:ad:7c REAUTH_TIMER entering state INITIALIZE

EAP: EAP entering state RECEIVED

EAP: parseEapResp: rxResp=1 respId=116 respMethod=4 respVendor=0 respVendorMethod=0

EAP: EAP entering state INTEGRITY_CHECK

EAP: EAP entering state METHOD_RESPONSE

EAP-MD5: Response - hexdump(len=16): da 3a 94 58 f0 b6 2b 43 9c 36 fe ad 85 74 7d 13

EAP-MD5: Done - Success

EAP: EAP entering state SELECT_ACTION

EAP: getDecision: method succeeded -> SUCCESS

EAP: EAP entering state SUCCESS

EAP: Building EAP-Success (id=116)

EAP: eapReqData -> EAPOL - hexdump(len=4): 03 74 00 04

IEEE 802.1X: 00:00:f0:73:ad:7c BE_AUTH entering state SUCCESS

IEEE 802.1X: Sending EAP Packet to 00:00:f0:73:ad:7c (identifier 116)

IEEE 802.1X: 00:00:f0:73:ad:7c REAUTH_TIMER entering state INITIALIZE

IEEE 802.1X: 00:00:f0:73:ad:7c AUTH_PAE entering state AUTHENTICATED

eth0: STA 00:00:f0:73:ad:7c IEEE 802.1X: authorizing port

eth0: STA 00:00:f0:73:ad:7c IEEE 802.1X: authenticated - EAP type: 0 (Unknown)

IEEE 802.1X: 00:00:f0:73:ad:7c BE_AUTH entering state IDLE

Got DHCP broadcast packet from 00:00:f0:73:ad:7c

Got DHCP broadcast packet from 00:00:f0:73:ad:7c

Got DHCP broadcast packet from 00:00:f0:73:ad:7c

Signal 2 received - terminating

Removing station 00:00:f0:73:ad:7c

EAP: State machine removed

Flushing old station entries

Deauthenticate all stations

________________________________________________________________________________

_____________

 

Может кто знает решение этой проблемы

 

3) И ежё вопрос, возможно ли использование 802.1ч при такой схеме построения

 

client_eth <----> wired_eth <---VLAN_TARGED---->server_eth0.x |поднятый конец VLAN + hostapd на нём|

 

Please help!!!!

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing
×
×
  • Create New...
На сайте используются файлы cookie и сервисы аналитики для корректной работы форума и улучшения качества обслуживания. Продолжая использовать сайт, вы соглашаетесь с использованием файлов cookie и с Политикой конфиденциальности.