loco m2 сбрасывает на дефолт иногда

[ccmail]

кабель 10 метров  уличный новый поменял, 

Firmware Version:

XM.v6.3.16     Reset Button отключена. Что можно попробовать     Quote Oct 04 17:08:41 system: Start Oct 4 17:08:41 syslogd started: BusyBox v1.24.2 Oct 4 17:08:41 init: Run: /bin/lighttpd -D -f /etc/lighttpd.conf Oct 4 17:08:41 init: starting pid 1001, tty '/dev/null': '/bin/lighttpd -D -f /etc/lighttpd.conf' Oct 4 17:08:41 dropbear[1000]: Not backgrounding Oct 4 17:08:42 init: Run: /bin/udapi-bridge -w -g -k -p 61780 Oct 4 17:08:42 init: starting pid 1006, tty '/dev/null': '/bin/udapi-bridge -w -g -k -p 61780' Oct 4 17:08:42 FileSystem: Start check... Oct 4 17:08:42 zcip: init br0 Oct 4 17:08:42 init: Run: /bin/udapi-server -g Oct 4 17:08:42 init: starting pid 1017, tty '/dev/null': '/bin/udapi-server -g' Oct 4 17:08:43 init: Run: /sbin/getty -L ttyS0 115200 vt100 Oct 4 17:08:43 udapi-bridge[1006]: watchdog: started with interval 60 seconds Oct 4 17:08:44 udapi-bridge[1019]: udapi-bridge 0.13.3-no-git Oct 4 17:08:44 udapi-bridge[1019]: HTTP server started on interface 'lo', port '61780' Oct 4 17:08:44 udapi-bridge[1019]: LLDP: Skipping interface ath0 (Wireless) Oct 4 17:08:44 udapi-bridge[1019]: LLDP: Skipping interface br0 (bridge) Oct 4 17:08:44 udapi-server[1017]: udapi-server c45c459dee2039c2b326b6cc1b35f0f3509b3055 Oct 4 17:08:44 udapi-server[1017]: UDAPI version v1.0 Oct 4 17:08:48 FileSystem: End check. Oct 4 17:08:58 zcip: config br0 169.254.154.226 Oct 4 17:08:58 zcip: init br0 Oct 4 17:09:14 zcip: config br0 169.254.154.226 Oct 4 17:09:14 zcip: script /usr/etc/zcip.script config failed, exitcode=2 Oct 4 17:09:32 zcip: init br0 Oct 4 17:09:48 zcip: config br0 169.254.154.226 Oct 4 17:10:07 zcip: init br0 Oct 4 17:10:23 zcip: config br0 169.254.154.226 Oct 4 17:10:24 httpd[1098]: Password auth succeeded for 'ubnt' from 192.168.1.45 Oct 4 17:10:24 wireless: ath0 New Access Point/Cell address:Not-Associated Oct 4 17:10:29 wireless: ath0 Set Channel=0 Oct 4 17:10:41 zcip: init br0 Oct 4 17:10:57 zcip: config br0 169.254.154.226 Oct 4 17:11:15 zcip: init br0 Oct 4 17:11:31 init: reloading /etc/inittab Oct 4 17:11:31 system: Stop Oct 4 17:11:31 zcip: config br0 169.254.154.226 Oct 4 17:11:32 dropbear[1000]: Early exit: Terminated by signal Oct 4 17:11:32 init: process '/sbin/udhcpc -f -i br0 -s /etc/udhcpc/udhcpc -p /var/run/udhcpc.br0.pid -h "UBNT"' (pid 998) exited. Scheduling for Oct 4 17:11:32 init: process '/bin/dropbear -F -r /etc/persistent/dropbear_dss_host_key -r /etc/persistent/dropbear_rsa_host_key -p 22 ' (pid 1000 Oct 4 17:11:33 init: process '/bin/lighttpd -D -f /etc/lighttpd.conf' (pid 1001) exited. Scheduling for restart. Oct 4 17:11:34 syslogd exiting Oct 04 17:11:56 system: Start Oct 4 17:11:57 syslogd started: BusyBox v1.24.2 Oct 4 17:11:57 init: Run: /bin/dropbear -F -r /etc/persistent/dropbear_dss_host_key -r /etc/persistent/dropbear_rsa_host_key -p 22 Oct 4 17:11:57 init: starting pid 1754, tty '/dev/null': '/bin/dropbear -F -r /etc/persistent/dropbear_dss_host_key -r /etc/persistent/dropbear_rs Oct 4 17:11:58 init: Run: /bin/lighttpd -D -f /etc/lighttpd.conf Oct 4 17:11:58 init: starting pid 1755, tty '/dev/null': '/bin/lighttpd -D -f /etc/lighttpd.conf' Oct 4 17:12:00 dropbear[1754]: Not backgrounding Oct 4 17:12:01 zcip: init br0 Oct 4 17:12:02 wireless: ath0 Set Mode:Managed Oct 4 17:12:05 zcip: config br0 169.254.154.226 Oct 4 17:12:08 wireless: ath0 Set Mode:Managed Oct 4 17:12:08 wireless: ath0 Set Frequency:2.447 GHz (Channel 8) Oct 4 17:12:08 wireless: ath0 New Access Point/Cell address:F8:1A:67:F1:37:58 Oct 4 17:12:08 init: process '/sbin/udhcpc -f -i br0 -s /etc/udhcpc/udhcpc -p /var/run/udhcpc.br0.pid -h "UBNT"' (pid 1747) exited. Scheduling for Oct 4 17:12:08 init: Run: /sbin/udhcpc -f -i br0 -s /etc/udhcpc/udhcpc -p /var/run/udhcpc.br0.pid -h "UBNT" Oct 4 17:12:08 init: starting pid 1778, tty '/dev/null': '/sbin/udhcpc -f -i br0 -s /etc/udhcpc/udhcpc -p /var/run/udhcpc.br0.pid -h "UBNT"' Oct 4 17:12:08 zcip: init br0 Oct 4 17:12:16 zcip: init br0 Oct 4 17:12:17 zcip: config br0 169.254.154.226 Oct 4 17:12:24 zcip: config br0 169.254.154.226 Oct 4 17:12:24 zcip: script /usr/etc/zcip.script config failed, exitcode=2 Oct 4 17:12:32 zcip: config br0 169.254.154.226 Oct 4 17:12:32 zcip: script /usr/etc/zcip.script config failed, exitcode=2 Oct 4 17:13:16 httpd[1826]: Password auth succeeded for 'ubnt' from 192.168.1.45 Oct 4 17:13:31 init: reloading /etc/inittab Oct 4 17:13:31 system: Stop Oct 4 17:13:31 dropbear[1754]: Early exit: Terminated by signal Oct 4 17:13:31 wireless: ath0 Sending disassoc to f8:1a:67:f1:37:58. Reason: Disassociated because sending STA is leaving (or has left) BSS (8). Oct 4 17:13:31 wireless: ath0 New Access Point/Cell address:Not-Associated Oct 4 17:13:32 init: process '/bin/dropbear -F -r /etc/persistent/dropbear_dss_host_key -r /etc/persistent/dropbear_rsa_host_key -p 22 ' (pid 1754 Oct 4 17:13:32 init: process '/sbin/udhcpc -f -i br0 -s /etc/udhcpc/udhcpc -p /var/run/udhcpc.br0.pid -h "UBNT"' (pid 1778) exited. Scheduling for Oct 4 17:13:33 init: process '/bin/wpa_supplicant -D wext -i ath0 -c /etc/wpasupplicant_WPA-PSK.conf' (pid 1748) exited. Scheduling for restart. Oct 4 17:13:33 init: process '/bin/lighttpd -D -f /etc/lighttpd.conf' (pid 1755) exited. Scheduling for restart. Oct 4 17:13:34 syslogd exiting Oct 04 17:13:56 system: Start Oct 4 17:13:56 syslogd started: BusyBox v1.24.2 Oct 4 17:13:57 init: Run: /bin/dropbear -F -r /etc/persistent/dropbear_dss_host_key -r /etc/persistent/dropbear_rsa_host_key -p 22 Oct 4 17:13:57 init: starting pid 2273, tty '/dev/null': '/bin/dropbear -F -r /etc/persistent/dropbear_dss_host_key -r /etc/persistent/dropbear_rs Oct 4 17:13:58 init: Run: /bin/lighttpd -D -f /etc/lighttpd.conf Oct 4 17:13:58 init: starting pid 2275, tty '/dev/null': '/bin/lighttpd -D -f /etc/lighttpd.conf' Oct 4 17:13:59 dropbear[2273]: Not backgrounding Oct 4 17:14:01 zcip: init br0 Oct 4 17:14:01 wireless: ath0 Set Mode:Managed Oct 4 17:14:05 zcip: config br0 169.254.154.226 Oct 4 17:14:07 wireless: ath0 Set Mode:Managed Oct 4 17:14:07 wireless: ath0 Set Frequency:2.447 GHz (Channel 8) Oct 4 17:14:07 wireless: ath0 New Access Point/Cell address:F8:1A:67:F1:37:58 Oct 4 17:14:07 init: process '/sbin/udhcpc -f -i br0 -s /etc/udhcpc/udhcpc -p /var/run/udhcpc.br0.pid -h "NanoStation loco M2"' (pid 2266) exited. Oct 4 17:14:07 init: Run: /sbin/udhcpc -f -i br0 -s /etc/udhcpc/udhcpc -p /var/run/udhcpc.br0.pid -h "NanoStation loco M2" Oct 4 17:14:07 init: starting pid 2297, tty '/dev/null': '/sbin/udhcpc -f -i br0 -s /etc/udhcpc/udhcpc -p /var/run/udhcpc.br0.pid -h "NanoStation Oct 4 17:14:07 zcip: init br0 Oct 4 17:14:12 zcip: init br0 Oct 4 17:14:17 zcip: config br0 169.254.154.226 Oct 4 17:14:23 zcip: config br0 169.254.154.226 Oct 4 17:14:23 zcip: script /usr/etc/zcip.script config failed, exitcode=2 Oct 4 17:14:28 zcip: config br0 169.254.154.226 Oct 4 17:14:28 zcip: script /usr/etc/zcip.script config failed, exitcode=2

[Saab95]

Сбрасывать может если замыкают жилки кабеля, т.к. есть функционал сброса через кнопку на блоке питания.

 

Так же в самом устройстве есть схема защиты от статики по сетевому порту, действует она путем замыкания контактов сетевого разъема на массу (заземление). Если эта схема повреждена (мало ли что там по порту прилетало), то может иногда сама по себе замыкать, что приводит к сбросу настроек.

[belokuriha]

дермокабель с водой , или где то утечка.