Перейти к содержимому
Калькуляторы

Cisco show etherchannel всегда нулевая загрузка?

Есть на cat 3570x (15.2(4)E10) несколько lacp etherchannel-ов.

Как бы их не нагружал LOAD  на портах всегда ноль-повдоль. В интернетах пишут, что, должно показывать нагрузку на порты.

 

c3750x-24-core#sh etherchannel 4 port-channel
                Port-channels in the group:
                ---------------------------
Port-channel: Po4    (Primary Aggregator)
------------
Age of the Port-channel   = 0d:03h:06m:21s
Logical slot/port   = 10/4          Number of ports = 2
HotStandBy port = null
Port state          = Port-channel Ag-Inuse
Protocol            =   LACP
Port security       = Disabled
Load share deferral = Disabled

Ports in the Port-channel:

Index   Load   Port     EC state        No of bits
------+------+------+------------------+-----------
  0     00     Gi1/0/23 Active             0
  0     00     Gi1/0/24 Active             0

Time since last port bundled:    0d:03h:06m:10s    Gi1/0/24
Time since last port Un-bundled: 0d:03h:13m:20s    Gi1/0/24

Нагрузил по гланды - до 2 гбит с помощью 3 машинок (у одной intel nic teaming драйвером под виндой).

Просто на интерфейсе нагрузку пишет txload 251/255 :

c3750x-24-core#sh int po4
Port-channel4 is up, line protocol is up (connected)
  Hardware is EtherChannel, address is 2894.0f02.3818 (bia 2894.0f02.3818)
  MTU 9198 bytes, BW 2000000 Kbit/sec, DLY 10 usec,
     reliability 255/255, txload 251/255, rxload 1/255

Включил хистори на интерфейсе - тоже :

c3750x-24-core#sh int po4 history

      111111111111111111111111111111111111111111111111111111111111
      999999999999999999999999999999999999999999999999999999999999
      666677777777777777777777777777777777777777777777766666666666
      999900000000000000000000000000000000000000000000099999999999
 1970     *********************************************
 1969 **********************************************************
 1968 **********************************************************
 1967 **********************************************************
 1966 **********************************************************
 1965 **********************************************************
 1964 **********************************************************
 1963 **********************************************************
 1962 **********************************************************
 1961 **********************************************************
 1960 **********************************************************
     0....5....1....1....2....2....3....3....4....4....5....5....6
               0    5    0    5    0    5    0    5    0    5    0
      Port-channel4 output rate(mbits/sec) (last 60 seconds)

 

Тоже с загрузкой всё в порядке. Кто-нибудь знает, что это за load такой?

Поделиться сообщением


Ссылка на сообщение
Поделиться на других сайтах

SW-121#sh int po21
Port-channel21 is up, line protocol is up (connected)
  Hardware is EtherChannel, address is 5c5a.c777.d9b1 (bia 5c5a.c777.d9b1)
  MTU 1500 bytes, BW 10000000 Kbit/sec, DLY 10 usec,
     reliability 255/255, txload 1/255, rxload 1/255
  Encapsulation ARPA, loopback not set
  Keepalive set (10 sec)
  Full-duplex, 10Gb/s, link type is auto, media type is N/A
  input flow-control is on, output flow-control is unsupported
  Members in this channel: Te1/1/1
  ARP type: ARPA, ARP Timeout 04:00:00
  Last input 00:00:00, output 18:54:27, output hang never
  Last clearing of "show interface" counters never
  Input queue: 0/2000/0/0 (size/max/drops/flushes); Total output drops: 0
  Queueing strategy: fifo
  Output queue: 0/40 (size/max)
  5 minute input rate 1168000 bits/sec, 231 packets/sec
  5 minute output rate 285000 bits/sec, 120 packets/sec

     11422197914 packets input, 7042891678809 bytes, 0 no buffer
     Received 1867599482 broadcasts (1206606299 multicasts)
     0 runts, 0 giants, 0 throttles
     6269242 input errors, 6246123 CRC, 0 frame, 0 overrun, 0 ignored
     0 watchdog, 1206606299 multicast, 0 pause input
     0 input packets with dribble condition detected
     5065313643 packets output, 1777631996223 bytes, 0 underruns
     0 output errors, 0 collisions, 1 interface resets
     0 unknown protocol drops
     0 babbles, 0 late collision, 0 deferred
     0 lost carrier, 0 no carrier, 0 pause output
     0 output buffer failures, 0 output buffers swapped out

 

может про это речь?

Поделиться сообщением


Ссылка на сообщение
Поделиться на других сайтах

Вот про это:

c3750x-24-core#sh etherchannel 4 port-channel

...

Index   Load   Port     EC state        No of bits
------+------+------+------------------+-----------
  0     00     Gi1/0/23 Active             0
  0     00     Gi1/0/24 Active             0

Поделиться сообщением


Ссылка на сообщение
Поделиться на других сайтах

значит, что балансировка не настроена в езерченнеле

 

https://www.cisco.com/c/en/us/support/docs/lan-switching/etherchannel/116385-technote-etherchannel-00.html

Поделиться сообщением


Ссылка на сообщение
Поделиться на других сайтах

Не знаю, как на 3570x, но на 4948e и 3750g тоже нули при идеальной почти балансировке.

Поделиться сообщением


Ссылка на сообщение
Поделиться на других сайтах

2 часа назад, passer сказал:

Не знаю, как на 3570x, но на 4948e и 3750g тоже нули при идеальной почти балансировке.

4500x такая же херня.

Поделиться сообщением


Ссылка на сообщение
Поделиться на других сайтах

9 часов назад, passer сказал:

Не знаю, как на 3570x, но на 4948e и 3750g тоже нули при идеальной почти балансировке.

на 9300 и 9500 тоже 00

Поделиться сообщением


Ссылка на сообщение
Поделиться на других сайтах

c6506-1#sh etherchannel 12 port-channel
               Port-channels in the group:  
               ----------------------
Port-channel: Po12    (Primary Aggregator)
------------
Age of the Port-channel   = 65d:16h:32m:41s
Logical slot/port   = 14/7          Number of ports = 2
HotStandBy port = null  
Port state          = Port-channel Ag-Inuse  
Protocol            =   LACP
Fast-switchover     = disabled
Load share deferral = disabled    

Ports in the Port-channel:  

Index   Load      Port          EC state       No of bits
------+------+------------+------------------+-----------
0        55          Te5/5             Active        4
1        AA          Te6/5             Active        4

Time since last port bundled:    64d:17h:44m:50s    Te6/5
Time since last port Un-bundled: 64d:17h:50m:25s    Te6/5

 

Изменено пользователем guеst

Поделиться сообщением


Ссылка на сообщение
Поделиться на других сайтах

Видимо, это фишка исключительно шеститонников и нексусов. У нексуса тоже куча параметров для настройки балансировки - https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/6_x/nx-os/interfaces/configuration/guide/b-Cisco-Nexus-7000-Series-NX-OS-Interfaces-Configuration-Guide-6x-Book/configuring_port___channels.html

 

Поделиться сообщением


Ссылка на сообщение
Поделиться на других сайтах

видимо да...

nexus5548-2# sh port-channel traffic int port-channel 99
ChanId      Port Rx-Ucst Tx-Ucst Rx-Mcst Tx-Mcst Rx-Bcst Tx-Bcst
------ --------- ------- ------- ------- ------- ------- -------
   99   Eth1/29  56.46%  48.94%  75.62%  24.74%  51.33%   0.00%
   99   Eth1/30  43.53%  51.05%  24.37%  75.25%  48.66%  99.99%
 

Поделиться сообщением


Ссылка на сообщение
Поделиться на других сайтах

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Гость
Ответить в тему...

×   Вставлено в виде отформатированного текста.   Вставить в виде обычного текста

  Разрешено не более 75 смайлов.

×   Ваша ссылка была автоматически встроена.   Отобразить как ссылку

×   Ваш предыдущий контент был восстановлен.   Очистить редактор

×   Вы не можете вставить изображения напрямую. Загрузите или вставьте изображения по ссылке.