Jump to content

Настройка MA5626-24

x0e2003
 Share

Recommended Posts

x0e2003

x0e2003

Posted
Posted

Здравствуйте, помогите настроить данный свитч, нужно переключить режим работы G-PON в E-PON

 

Версия такая: 

MA5626#display version
{ <cr>|backplane<K>|frameid/slotid<S><Length 1-15> }:

  Command:
          display version

  VERSION : MA5626V800R310C00
  PATCH   : SPC100 SPH110
  PRODUCT : MA5626

  Mainboard Running Area Information:
 --------------------------------------------
  Current Program Area : Area B
  Current Data Area : Area B

  Program Area A Version : MA5626V800R310C00
  Program Area B Version : MA5626V800R310C00

  Data Area A Version : MA5626V800R310C00
  Data Area B Version : MA5626V800R310C00
 --------------------------------------------

  Copyright (c) Huawei Technologies Co., Ltd. 2002-2012 All rights reserved
  Uptime is 0 day(s), 0 hour(s), 32 minute(s), 15 second(s)

Конфиг: 

display current-configuration
[MA5626V800R310: 3900]
#
[global-config]
  <global-config>
 trap convert event-to-alarm 0x3721000a
 trap filter event condition id 0x0e43a001
 trap filter alarm condition id 0x0a31a0dd
 cpu-overload-control parameter adjustfactor 20
#
[device-config]
  <device-config>
 port port-index 0/0/1 port-type GPON-PORT
 port port-index 0/0/2 port-type GPON-PORT
#
[public-config]
  <public-config>
 snmp-agent local-engineid 800007DB03286ED4B1680601
 snmp-agent community read "%S0O&R^7OW*+Xa9W4YQ.U=1!!B#A8&)VAB']]F;U$19'2_1!!%"
 snmp-agent community write "%0;OY:ZN9E3#]`FQ^XRO$#A!!B#A8&)VAB']]F;U$19'2_1!!%"
 snmp-agent target-host trap-hostname 117.169.37.139EM1 address 117.169.37.139  udp-port 162 trap-paramsname 1MT                                    U.172.17.254.2
 snmp-agent target-host trap-hostname 117.169.37.140EM1 address 117.169.37.140  udp-port 162 trap-paramsname 1MTU.172.17.254.2
 snmp-agent target-host trap-hostname 1MTU.172.17.254.2 address 172.17.254.2
udp-port 162 trap-paramsname 1MTU.172.17.254.2
 snmp-agent target-host trap-paramsname U2000 v1 securityname "%S0O&R^7OW*+
Xa9W4YQ.U=1!!B#A8&)VAB']]F;U$19'2_1!!%"
 snmp-agent target-host trap-paramsname 1MTU.172.17.254.2 v2C securityname "%>
YA,^-M)#\aQZ$R6^,Z$*A!!B#A8&)VAB']]F;U$19'2_1!!%"
 snmp-agent trap enable standard
#
[vlan-config]
  <vlan-config>
 vlan 42 smart
 vlan 1440 to 1463 smart
 port vlan 42 0/0 1
 port vlan 42 0/0 2
 port vlan 1440 to 1463 0/0 1
 port vlan 1440 to 1463 0/0 2
 protocol-8021p-pri 3 vlan 42
#
[vlan-srvprof]
  <vlan-srvprof>
 vlan service-profile profile-id 1 profile-name "1"
  user-bridging enable
  commit
 vlan bind service-profile 1 profile-id 1
#
[gponnni]
  <gponnni-0/0/2>
 interface gponnni 0/0/2
 password "%1%G7YE;GDS\[E3CLCX#a0!!!%"
#
[port-config]
  <port-config>
 port desc 0/0/1 description "^C"
#
[emu-config]
  <emu-config>
 emu add 0 h831vesc 0 1 RS232 "H831VESC"
#
[h831vesc]
  <h831vesc-0>
 interface emu 0
 esc digital 0  name fog
#
[bbs-config]
  <bbs-config>
 service-port 0 vlan 1440 eth 0/1/1 multi-service user-vlan untagged  rx-cttr 6 tx-cttr 6
 service-port 1 vlan 1441 eth 0/1/2 multi-service user-vlan untagged  rx-cttr 6 tx-cttr 6
 service-port 2 vlan 1442 eth 0/1/3 multi-service user-vlan untagged  rx-cttr 6 tx-cttr 6
 service-port 3 vlan 1443 eth 0/1/4 multi-service user-vlan untagged  rx-cttr 6 tx-cttr 6
 service-port 4 vlan 1444 eth 0/1/5 multi-service user-vlan untagged  rx-cttr 6 tx-cttr 6
 service-port 5 vlan 1445 eth 0/1/6 multi-service user-vlan untagged  rx-cttr 6 tx-cttr 6
 service-port 6 vlan 1446 eth 0/1/7 multi-service user-vlan untagged  rx-cttr 6 tx-cttr 6
 service-port 7 vlan 1447 eth 0/1/8 multi-service user-vlan untagged  rx-cttr 6 tx-cttr 6
 service-port 8 vlan 1448 eth 0/1/9 multi-service user-vlan untagged  rx-cttr 6 tx-cttr 6
 service-port 9 vlan 1449 eth 0/1/10 multi-service user-vlan untagged  rx-cttr 6 tx-cttr 6
 service-port 10 vlan 1450 eth 0/1/11 multi-service user-vlan untagged  rx-cttr 6 tx-cttr 6
 service-port 11 vlan 1451 eth 0/1/12 multi-service user-vlan untagged  rx-cttr 6 tx-cttr 6
 service-port 12 vlan 1452 eth 0/1/13 multi-service user-vlan untagged  rx-cttr 6 tx-cttr 6
 service-port 13 vlan 1453 eth 0/1/14 multi-service user-vlan untagged  rx-cttr 6 tx-cttr 6
 service-port 14 vlan 1454 eth 0/1/15 multi-service user-vlan untagged  rx-cttr 6 tx-cttr 6
 service-port 15 vlan 1455 eth 0/1/16 multi-service user-vlan untagged  rx-cttr 6 tx-cttr 6
 service-port 16 vlan 1456 eth 0/1/17 multi-service user-vlan untagged  rx-cttr 6 tx-cttr 6
 service-port 17 vlan 1457 eth 0/1/18 multi-service user-vlan untagged  rx-cttr 6 tx-cttr 6
 service-port 18 vlan 1458 eth 0/1/19 multi-service user-vlan untagged  rx-cttr 6 tx-cttr 6
 service-port 19 vlan 1459 eth 0/1/20 multi-service user-vlan untagged  rx-cttr 6 tx-cttr 6
 service-port 20 vlan 1460 eth 0/1/21 multi-service user-vlan untagged  rx-cttr 6 tx-cttr 6
 service-port 21 vlan 1461 eth 0/1/22 multi-service user-vlan untagged  rx-cttr 6 tx-cttr 6
 service-port 22 vlan 1462 eth 0/1/23 multi-service user-vlan untagged  rx-cttr 6 tx-cttr 6
 service-port 23 vlan 1463 eth 0/1/24 multi-service user-vlan untagged  rx-cttr 6 tx-cttr 6
#
[abs-config]
  <abs-config>
 config
 vmac dslam-id 0xffffffff
#
[prevlanif]
  <prevlanif>
 interface vlanif42
#
[vlanif]
  <vlanif42>
interface vlanif42
 ip address 10.41.52.37 255.255.248.0
#
[meth]
  <meth0>
interface meth0
 ip address 10.11.104.2 255.255.255.0
#
[null]
  <null0>
interface null0
#
[aaa]
  <aaa>
aaa
 authentication-scheme "default"
 #
 authorization-scheme "default"
 #
 accounting-scheme "default"
 #
 domain "default"
 #
return

В общем вопрос, как на SFP портах поменять режим работы с G-PON на E-PON т.к. модуль EPON и OLT станция тоже EPON?

 

Так же инструкции в инете не нашел.

titan

titan

Posted
Posted (edited)

возможно так 

port port-index 0/0/1 port-type EPON-PORT

port mode 0/0/2 epon 

если невозможно то физически модель отличается 

port mode 0/0/2 если невозможно значит физически модель отличается

 

Edited by titan
x0e2003

x0e2003

Posted
  • Author
Posted

В общем ввёл выдало:
  

MA5626(config)#port ?
---------------------------------------------
  Command of config Mode:
---------------------------------------------
desc                  Set port description
mode                  Set nni port mode
vlan                  Port VLAN operation

MA5626(config)#port mode ?
---------------------------------------------
  Command of config Mode:
---------------------------------------------
frameid/slotid/portid<S><Length 5-15>
                      Frame ID/Slot ID/Port ID
frameid/slotid<S><Length 3-15>
                      Frame ID/Slot ID

MA5626(config)#port mode 0/0/2 ?
---------------------------------------------
  Command of config Mode:
---------------------------------------------
adapt                 Adapt mode
epon                  EPON mode
ge                    GE mode
gpon                  GPON mode

MA5626(config)#port mode 0/0/2 epon ?
---------------------------------------------
  Command of config Mode:
---------------------------------------------
<cr>                  Please press ENTER to execute command

MA5626(config)#port mode 0/0/2 epon
 To change the uplink port mode to a fixed mode, clear the service configuration on the port, change the mode, save the data, and perform a restart operation,  or erase the data, and perform a restart operation. Are you sure to proceed?(y/ n)[n]

 

 

Т.е. нужно как то очистить конфигурацию порта, только потом даст поменять

 

 

1 час назад, TriKS сказал:

Так это чисто GPON онуха, шо вы чудите :)

 

 

Данная модель поддерживает как E-PON так и G-PON

x0e2003

x0e2003

Posted
  • Author
Posted

в общем ввёл: erase flash data active/standby
перезапуск, после в конфиге:
  

MA5626#display current-configuration
{ <cr>|section<K>|simple<K>||<K> }:

  Command:
          display current-configuration
[MA5626V800R310: 3900]
#
[global-config]
  <global-config>
 resource threshold mem 85
#
[device-config]
  <device-config>
 port port-index 0/0/2 port-type EPON-PORT
#
[public-config]
  <public-config>
 snmp-agent local-engineid 800007DB03286ED4B1680601
#
[eponnni]
  <eponnni-0/0/2>
 interface eponnni 0/0/2
 password "%VL*&O__.3U3;RaK'0`"NPQ!!VL*&O__.3U3;RaK'0`"NPQ!!%"
 loid "%VL*&O__.3U3;RaK'0`"NPQ!!,DWUN(I=,'UZ_`@1RI<=WQ!!%"
 checkcode "%L9;7+FT2-[LX3NU/Va@a]Q!!%"
#
[emu-config]
  <emu-config>
 emu add 0 h831vesc 0 1 RS232 "H831VESC"
#
[meth]
  <meth0>
interface meth0
 ip address 10.11.104.2 255.255.255.0
#
[null]
  <null0>
interface null0
#
[aaa]
  <aaa>
aaa
 authentication-scheme "default"
 #
 authorization-scheme "default"
 #
 accounting-scheme "default"
 #
 domain "default"
 #
return

 

 

Всё переключилось, есть у кого руководство по данному девайсу для дальнейшей настройки?

titan

titan

Posted
Posted (edited)

рабочий конфиг

vlan 500 админский vlan

vlan 2254 абонентский vlan

ip девайса задан статически с бошки так

ont ipconfig 0 5 static ip-address 10.90.88.55 mask 255.255.248.0 vlan 500 priority 0 gateway 10.90.88.33

 

[MA5620V800R312: 2300]
#
[sysmode]
  <sysmode>
 protocol support sip
#
[device-config]
  <device-config>
 port port-index 0/0/1 port-type GPON-PORT
#
[public-config]
  <public-config>
 snmp-agent local-engineid 800007DB038038BC87FFDD0E
 snmp-agent community read %S0O&R^7OW*+Xa9W4YQ.U=1!!B#A8&)VAB']]F;U$19'2_1!!%
 snmp-agent community write %0;OY:ZN9E3#]`FQ^XRO$#A!!B#A8&)VAB']]F;U$19'2_1!!%
 snmp-agent sys-info version v2c
#
[vlan-config]
  <vlan-config>
 vlan 500 smart
 vlan 2254 smart
 protocol-8021p-pri 0 vlan 500
 port vlan 500 0/0 1
 port vlan 2254 0/0 1
#
[gponnni]
  <gponnni-0/0/1>
 interface gponnni 0/0/1
 password "%5L3_.^M^.9I\5<V@WN#JI1!!B#A8&)VAB']]F;U$19'2_1!!B#A8&)VAB']]F;U$19' 2_1!!%"
 loid "%VL*&O__.3U3;RaK'0`"NPQ!!,DWUN(I=,'UZ_`@1RI<=WQ!!%"
 checkcode "%L9;7+FT2-[LX3NU/Va@a]Q!!%"
#
[bbs-config]
  <bbs-config>
 service-port 0 vlan 2254 eth 0/1/1 multi-service user-vlan untagged
 service-port 1 vlan 2254 eth 0/1/2 multi-service user-vlan untagged
 service-port 2 vlan 2254 eth 0/1/3 multi-service user-vlan untagged
 service-port 3 vlan 2254 eth 0/1/4 multi-service user-vlan untagged
 service-port 4 vlan 2254 eth 0/1/5 multi-service user-vlan untagged
 service-port 5 vlan 500 eth 0/1/6 multi-service user-vlan untagged
 service-port 6 vlan 2254 eth 0/1/7 multi-service user-vlan untagged
 service-port 7 vlan 2254 eth 0/1/8 multi-service user-vlan untagged
 service-port 8 vlan 2254 eth 0/1/9 multi-service user-vlan untagged
 service-port 9 vlan 2254 eth 0/1/10 multi-service user-vlan untagged
 service-port 10 vlan 2254 eth 0/1/11 multi-service user-vlan untagged
 service-port 11 vlan 2254 eth 0/1/12 multi-service user-vlan untagged
 service-port 12 vlan 2254 eth 0/1/13 multi-service user-vlan untagged
 service-port 13 vlan 2254 eth 0/1/14 multi-service user-vlan untagged
 service-port 14 vlan 2254 eth 0/1/15 multi-service user-vlan untagged
 service-port 15 vlan 2254 eth 0/1/16 multi-service user-vlan untagged
 service-port 16 vlan 2254 eth 0/1/17 multi-service user-vlan untagged
 service-port 17 vlan 2254 eth 0/1/18 multi-service user-vlan untagged
 service-port 18 vlan 2254 eth 0/1/19 multi-service user-vlan untagged
 service-port 19 vlan 2254 eth 0/1/20 multi-service user-vlan untagged
 service-port 20 vlan 2254 eth 0/1/21 multi-service user-vlan untagged
 service-port 21 vlan 2254 eth 0/1/22 multi-service user-vlan untagged
 service-port 22 vlan 2254 eth 0/1/23 multi-service user-vlan untagged
 service-port 23 vlan 2254 eth 0/1/24 multi-service user-vlan untagged
#
[voip]
  <voip>
voip
 ip address media 10.90.88.55 10.90.88.33
 ip address signaling 10.90.88.55
#
[sip]
  <sip-0>
 interface sip 0
 if-sip attribute basic media-ip 10.90.88.55 signal-ip 10.90.88.55 signal-port  5060 home-domain 10.90.88.133
 if-sip attribute basic primary-proxy-ip1 10.90.88.133 primary-proxy-port 5060
 if-sip attribute basic sipprofile-index 0
 fax parameters transmode 1
 sipprofile modify syspara 36 1
 sipprofile modify syspara 38 522615
#
[esl-user]
  <esl-user>
 esl user
 sippstnuser add 0/2/2 0 telno 501
 sippstnuser add 0/2/6 0 telno 506
 sippstnuser add 0/2/1 0 telno 500
 sippstnuser add 0/2/7 0 telno 507
 sippstnuser add 0/2/3 0 telno 502
 sippstnuser add 0/2/4 0 telno 503
 sippstnuser add 0/2/5 0 telno 504
 sippstnuser add 0/2/12 0 telno 511
 sippstnuser add 0/2/8 0 telno 508
 sippstnuser add 0/2/9 0 telno 509
 sippstnuser add 0/2/10 0 telno 510
 sippstnuser add 0/2/11 0 telno 505
 sippstnuser attribute set 0/2/2 dc-time 80
 sippstnuser attribute set 0/2/6 dc-time 80
 sippstnuser attribute set 0/2/1 dc-time 80
 sippstnuser attribute set 0/2/7 dc-time 80
 sippstnuser attribute set 0/2/3 dc-time 80
 sippstnuser attribute set 0/2/4 dc-time 80
 sippstnuser attribute set 0/2/5 dc-time 80
 sippstnuser attribute set 0/2/12 dc-time 80
 sippstnuser attribute set 0/2/8 dc-time 80
 sippstnuser attribute set 0/2/9 dc-time 80
 sippstnuser attribute set 0/2/10 dc-time 80
 sippstnuser attribute set 0/2/11 dc-time 80
 sippstnuser rightflag set 0/2/1 telno 500 cw disable
 sippstnuser rightflag set 0/2/2 telno 501 cw disable
 sippstnuser rightflag set 0/2/3 telno 502 cw disable
 sippstnuser rightflag set 0/2/4 telno 503 cw disable
 sippstnuser rightflag set 0/2/5 telno 504 cw disable
 sippstnuser rightflag set 0/2/6 telno 506 cw disable
 sippstnuser rightflag set 0/2/7 telno 507 cw disable
 sippstnuser rightflag set 0/2/8 telno 508 cw disable
 sippstnuser rightflag set 0/2/9 telno 509 cw disable
 sippstnuser rightflag set 0/2/10 telno 510 cw disable
 sippstnuser rightflag set 0/2/11 telno 505 cw disable
 sippstnuser rightflag set 0/2/12 telno 511 cw disable
 sippstnuser auth set 0/2/1 telno 500  auth-username "%`@)3I..),/7;^8^Q>@E[a!!! B#A8&)VAB']]F;U$19'2_1!!B#A8&)VAB']]F;U$19'2_1!!B#A8&)VAB']]F;U$19'2_1!!%"
 sippstnuser auth set 0/2/1 telno 500  password-mode password auth-password %`@)3I..),/7;^8^Q>@E[a!!!B#A8&)VAB']]F;U$19'2_1!!B#A8&)VAB']]F;U$19'2_1!!B#A8&)VAB']]F;U$19'2_1!!%
 sippstnuser auth set 0/2/2 telno 501  auth-username "%N9^'M22*)\-M85M22"CJ"1!! B#A8&)VAB']]F;U$19'2_1!!B#A8&)VAB']]F;U$19'2_1!!B#A8&)VAB']]F;U$19'2_1!!%"
 sippstnuser auth set 0/2/2 telno 501  password-mode password auth-password %N9^'M22*)\-M85M22"CJ"1!!B#A8&)VAB']]F;U$19'2_1!!B#A8&)VAB']]F;U$19'2_1!!B#A8&)VAB']]F;U$19'2_1!!%
 sippstnuser auth set 0/2/3 telno 502  auth-username "%aB)7=,\B>+751RS(_<a'"Q!! B#A8&)VAB']]F;U$19'2_1!!B#A8&)VAB']]F;U$19'2_1!!B#A8&)VAB']]F;U$19'2_1!!%"
 sippstnuser auth set 0/2/3 telno 502  password-mode password auth-password %aB)7=,\B>+751RS(_<a'"Q!!B#A8&)VAB']]F;U$19'2_1!!B#A8&)VAB']]F;U$19'2_1!!B#A8&)VAB']]F;U$19'2_1!!%
 sippstnuser auth set 0/2/4 telno 503  auth-username "%FOa5[AL)"$P"0RV"/G];VQ!! B#A8&)VAB']]F;U$19'2_1!!B#A8&)VAB']]F;U$19'2_1!!B#A8&)VAB']]F;U$19'2_1!!%"
 sippstnuser auth set 0/2/4 telno 503  password-mode password auth-password %
FOa5[AL)"$P"0RV"/G];VQ!!B#A8&)VAB']]F;U$19'2_1!!B#A8&)VAB']]F;U$19'2_1!!B#A8&)
VAB']]F;U$19'2_1!!%
 sippstnuser auth set 0/2/5 telno 504  auth-username "%H@&,>*&K!!*;AUOM.%D++1!! B#A8&)VAB']]F;U$19'2_1!!B#A8&)VAB']]F;U$19'2_1!!B#A8&)VAB']]F;U$19'2_1!!%"
 sippstnuser auth set 0/2/5 telno 504  password-mode password auth-password %H@&,>*&K!!*;AUOM.%D++1!!B#A8&)VAB']]F;U$19'2_1!!B#A8&)VAB']]F;U$19'2_1!!B#A8&)VAB']]F;U$19'2_1!!%
 sippstnuser auth set 0/2/6 telno 506  auth-username "%I)[<;H41S`G&B:#Y`($X=!!! B#A8&)VAB']]F;U$19'2_1!!B#A8&)VAB']]F;U$19'2_1!!B#A8&)VAB']]F;U$19'2_1!!%"
 sippstnuser auth set 0/2/6 telno 506  password-mode password auth-password %H$$=:>GJFaUXTE9/7KF_>A!!B#A8&)VAB']]F;U$19'2_1!!B#A8&)VAB']]F;U$19'2_1!!B#A8&)VAB']]F;U$19'2_1!!%
 sippstnuser auth set 0/2/7 telno 507  auth-username "%Z,=G689\;,I1:+8'Q6G]UQ!! B#A8&)VAB']]F;U$19'2_1!!B#A8&)VAB']]F;U$19'2_1!!B#A8&)VAB']]F;U$19'2_1!!%"
 sippstnuser auth set 0/2/7 telno 507  password-mode password auth-password %Z,=G689\;,I1:+8'Q6G]UQ!!B#A8&)VAB']]F;U$19'2_1!!B#A8&)VAB']]F;U$19'2_1!!B#A8&)VAB']]F;U$19'2_1!!%
 sippstnuser auth set 0/2/8 telno 508  auth-username "%C[\`AY!<XG0DWX_#8DB_8!!! B#A8&)VAB']]F;U$19'2_1!!B#A8&)VAB']]F;U$19'2_1!!B#A8&)VAB']]F;U$19'2_1!!%"
 sippstnuser auth set 0/2/8 telno 508  password-mode password auth-password %C[\`AY!<XG0DWX_#8DB_8!!!B#A8&)VAB']]F;U$19'2_1!!B#A8&)VAB']]F;U$19'2_1!!B#A8&)VAB']]F;U$19'2_1!!%
 sippstnuser auth set 0/2/9 telno 509  auth-username "%,(P4STV#6))CQ>4=@5\%L!!! B#A8&)VAB']]F;U$19'2_1!!B#A8&)VAB']]F;U$19'2_1!!B#A8&)VAB']]F;U$19'2_1!!%"
 sippstnuser auth set 0/2/9 telno 509  password-mode password auth-password %,( P4STV#6))CQ>4=@5\%L!!!B#A8&)VAB']]F;U$19'2_1!!B#A8&)VAB']]F;U$19'2_1!!B#A8&)VAB']]F;U$19'2_1!!%
 sippstnuser auth set 0/2/10 telno 510  auth-username "%YaLIDG5%5H.]-aPPU<%QLQ!!B#A8&)VAB']]F;U$19'2_1!!B#A8&)VAB']]F;U$19'2_1!!B#A8&)VAB']]F;U$19'2_1!!%"
 sippstnuser auth set 0/2/10 telno 510  password-mode password auth-password %
YaLIDG5%5H.]-aPPU<%QLQ!!B#A8&)VAB']]F;U$19'2_1!!B#A8&)VAB']]F;U$19'2_1!!B#A8&)
VAB']]F;U$19'2_1!!%
 sippstnuser auth set 0/2/11 telno 505  auth-username "%Y5(J.,4AXaEP=IUA^TMW,1!!B#A8&)VAB']]F;U$19'2_1!!B#A8&)VAB']]F;U$19'2_1!!B#A8&)VAB']]F;U$19'2_1!!%"
 sippstnuser auth set 0/2/11 telno 505  password-mode password auth-password %
Y5(J.,4AXaEP=IUA^TMW,1!!B#A8&)VAB']]F;U$19'2_1!!B#A8&)VAB']]F;U$19'2_1!!B#A8&)
VAB']]F;U$19'2_1!!%
 sippstnuser auth set 0/2/12 telno 511  auth-username "%IY.#IWJ2^!\U:L##U0_#<1!!B#A8&)VAB']]F;U$19'2_1!!B#A8&)VAB']]F;U$19'2_1!!B#A8&)VAB']]F;U$19'2_1!!%"
 sippstnuser auth set 0/2/12 telno 511  password-mode password auth-password %
IY.#IWJ2^!\U:L##U0_#<1!!B#A8&)VAB']]F;U$19'2_1!!B#A8&)VAB']]F;U$19'2_1!!B#A8&)
VAB']]F;U$19'2_1!!%
#
[prevlanif]
  <prevlanif>
 interface vlanif500
#
[vlanif]
  <vlanif500>
interface vlanif500
 ip address 10.90.88.55 255.255.248.0
#
[meth]
  <meth0>
interface meth0
 ip address 10.11.104.2 255.255.255.0
#
[null]
  <null0>
interface null0
#
[aaa]
  <aaa>
aaa
 authentication-scheme "default"
 #
 authorization-scheme "default"
 #
 accounting-scheme "default"
 #
 domain "default"
 #
return
 

Edited by titan

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing
×
×
  • Create New...
На сайте используются файлы cookie и сервисы аналитики для корректной работы форума и улучшения качества обслуживания. Продолжая использовать сайт, вы соглашаетесь с использованием файлов cookie и с Политикой конфиденциальности.