[alibek]

Есть старый сервер Dell PowerEdge 2950 с RHEL4.

На сервере установлен RAID-контроллер LSI Logic SAS based MegaRAID 1078, к нему подключены 4 диска, объединенных в RAID5, которые смонтированы в LVM.

Можно ли как-то просмотреть состояние RAID-котроллера и массивов? Я подозреваю, что на RAID-контроллере сдохла батарейка и выключился кеш записи.

[roysbike]

Можно . У меня стоит LSI Logic / Symbios Logic MegaRAID SAS 2208. Через megacli получаю данные . Скрипт вызывает zabbix

 

Утилита

 

mkdir MegaCLI
$ cd MegaCLI/
$ wget http://www.lsi.com/downloads/Public/RAID%20Controllers/RAID%20Controllers%20Common%20Files/8.07.14_MegaCLI.zip

unzip 8.07.14_MegaCLI.zip

 

 

megacli -AdpAllInfo -aAll

 

 cd Linux/
rpm -ihv MegaCli-8.07.14-1.noarch.rpm

Zabbix

#cat /etc/zabbix/scripts/lsimegaraid.sh

 

#!/bin/bash

export LC_ALL=""
export LANG="en_US.UTF-8"
#
MEGACLI="sudo /usr/sbin/megacli"
#
if [[ -n ${1} && -n ${2} && -z ${3} ]]; then
 ##### DISCOVERY #####
 TYPE="${2}"
 if [[ ${TYPE} == "virtdiskovery" ]]; then
   DRIVES=`${MEGACLI} -LDInfo -LAll -a0 -NoLog | awk '/Virtual Drive:/ {printf("VirtualDrive%d\n", $3)}'`
   if [[ -n ${DRIVES} ]]; then
     JSON="{ \"data\":["
     SEP=""
     for DRIVE in ${DRIVES}; do
       JSON=${JSON}"$SEP{\"{#VIRTNUM}\":\"${DRIVE}\"}"
       SEP=", "
     done
     JSON=${JSON}"]}"
     echo ${JSON}
   fi
 elif [[ ${TYPE} == "physdiskovery" ]]; then
   DRIVES=`${MEGACLI} -PDlist -a0 -NoLog | awk '/Slot Number:/ {printf("DriveSlot%d\n", $3)}'`
   if [[ -n ${DRIVES} ]]; then
     JSON="{ \"data\":["
     SEP=""
     for DRIVE in ${DRIVES}; do
       JSON=${JSON}"$SEP{\"{#PHYSNUM}\":\"${DRIVE}\"}"
       SEP=", "
     done
     JSON=${JSON}"]}"
     echo ${JSON}
   fi
 fi
 exit 0
elif [[ -n ${1} && -n ${2} && -n ${3} ]]; then
 ##### PARAMETERS #####
 HOST="${1}"
 DRIVE="${2}"
 METRIC="${3}"
 FILECACHE="/tmp/zabbix.lsimegaraid.cache"
 TTLCACHE="55"
 TIMENOW=`date '+%s'`
 ##### CACHE #####
 if [ -s "${FILECACHE}" ]; then
   TIMECACHE=`stat -c"%Y" "${FILECACHE}"`
 else
   TIMECACHE=0
 fi
 if [ "$((${TIMENOW} - ${TIMECACHE}))" -gt "${TTLCACHE}" ]; then
   echo "" >> ${FILECACHE} # !!!
   DATACACHE=`${MEGACLI} -PDlist -a0 -NoLog | awk -F':' '
       function ltrim(s) { sub(/^[ \t]+/, "", s); return s }
       function rtrim(s) { sub(/[ \t]+$/, "", s); return s }
       function trim(s)  { return rtrim(ltrim(s)); }
       /Slot Number/              {slotcounter+=1; slot[slotcounter]=trim($2)}
       /Inquiry Data/             {inquiry[slotcounter]=trim($2)}
       /Firmware state/           {state[slotcounter]=trim($2)}
       /Drive Temperature/        {temperature[slotcounter]=trim($2)}
       /S.M.A.R.T/                {smart[slotcounter]=trim($2)}
       /Media Error Count/        {mediaerror[slotcounter]=trim($2)}
       /Other Error Count/        {othererror[slotcounter]=trim($2)}
       /Predictive Failure Count/ {failurecount[slotcounter]=trim($2)}
       END {
         for (i=1; i<=slotcounter; i+=1) {
           printf ( "DriveSlot%d inquiry:%s\n",slot[i], inquiry[i]);
           printf ( "DriveSlot%d state:%s\n", slot[i], state[i]);
           printf ( "DriveSlot%d temperature:%d\n", slot[i], temperature[i]);
           printf ( "DriveSlot%d smart:%s\n", slot[i], smart[i]);
           printf ( "DriveSlot%d mediaerror:%d\n", slot[i], mediaerror[i]);
           printf ( "DriveSlot%d othererror:%d\n", slot[i], othererror[i]);
           printf ( "DriveSlot%d failurecount:%d\n", slot[i], failurecount[i]);
         }
       }';
       ${MEGACLI} -LDInfo -LAll -a0 -NoLog | awk -F':' '
       function ltrim(s) { sub(/^[ \t]+/, "", s); return s }
       function rtrim(s) { sub(/[ \t]+$/, "", s); return s }
       function trim(s)  { return rtrim(ltrim(s)); }
       /Virtual Drive:/ {drivecounter+=1; slot[drivecounter]=trim($2);}
       /State/          {state[drivecounter]=trim($2)}
       /Bad Blocks/     {badblock[drivecounter]=trim($2)}
       END {
         for (i=1; i<=drivecounter; i+=1) {
           printf ( "VirtualDrive%d state:%s\n", slot[i], state[i]);
           printf ( "VirtualDrive%d badblock:%s\n", slot[i], badblock[i]);
         }
       }'` || exit 1
   echo "${DATACACHE}" > ${FILECACHE} # !!!
 fi
 #
 cat "${FILECACHE}" | grep -i ${DRIVE} | awk -F':' "/${METRIC}/ {print \$2}" | head -n1
 exit 0
#
else
 exit 0
fi

cat /etc/zabbix/zabbix_agentd.d/userparameter_hwraid.conf

 

UserParameter=lsimegaraid[*],sudo /etc/zabbix/scripts/lsimegaraid.sh "none" $1 $2

zbx_lsi_raid.xml

Изменено 28 декабря, 2016 пользователем roysbike

[alibek]

Ага, спасибо, помогло.

Правда сайт www.lsi.com уже неживой, но я нашел зеркало.

[snvoronkov]

Правда сайт www.lsi.com уже неживой

https://en.wikipedia.org/wiki/LSI_Corporation

 

On May 6, 2014, LSI Corporation was acquired by Avago Technologies (now Broadcom) for $6.6 billion.