cameltrophy Posted June 28, 2016 Posted June 28, 2016 (edited) Добрый день, не получается объединить три канала, имеется 6 штук SXT G-5HPacD r2 и 2 штуки 3011UiAS, собирал по мануалу: http://www.lanmart.ru/blogs/test_mikrotik_rb2011ls-in_and_sxtg_680_mbps_wi-fi При двух включенных антеннах все работает нормально, как только включаю еще 2 все падает, ничего не пингуется, в чем может быть проблема? Конфиг АР: # jan/07/1970 02:50:15 by RouterOS 6.35.2 # software id = SBVB-UCHN # /interface bridge add name=bridge1 /interface wireless security-profiles set [ find default=yes ] supplicant-identity=MikroTik add authentication-types=wpa-psk,wpa2-psk eap-methods="" management-protection=\ allowed mode=dynamic-keys name=profile1 supplicant-identity="" \ wpa-pre-shared-key=1111111 wpa2-pre-shared-key=111 /interface wireless set [ find default-name=wlan1 ] band=5ghz-a/n/ac basic-rates-a/g="" \ channel-width=20/40mhz-Ce country=russia2 disabled=no frequency-mode=\ regulatory-domain hw-retries=15 mode=bridge multicast-helper=full \ nv2-preshared-key=111 nv2-security=enabled radio-name=1111 \ rate-set=configured security-profile=profile1 ssid=1111 \ supported-rates-a/g="" tdma-period-size=1 tx-power=2 tx-power-mode=\ all-rates-fixed wds-default-bridge=bridge1 wds-mode=dynamic \ wireless-protocol=nv2 wps-mode=disabled /interface wireless nstreme set wlan1 disable-csma=yes enable-nstreme=yes framer-policy=dynamic-size /interface bridge port add bridge=bridge1 interface=ether1 add bridge=bridge1 interface=wlan1 /ip address add address=172.20.20.2/24 interface=bridge1 network=172.20.20.0 /system identity set name=Krisha_1 /system leds set 0 interface=wlan1 /system routerboard settings set cpu-frequency=720MHz protected-routerboot=disabled Конфиг Client: # jan/07/1970 02:55:39 by RouterOS 6.35.2 # software id = CRWG-CLBY # /interface bridge add name=bridge1 /interface wireless security-profiles set [ find default=yes ] supplicant-identity=MikroTik add authentication-types=wpa-psk,wpa2-psk eap-methods="" management-protection=\ allowed mode=dynamic-keys name=profile1 supplicant-identity="" \ wpa-pre-shared-key=1111111 wpa2-pre-shared-key=111 /interface wireless set [ find default-name=wlan1 ] band=5ghz-a/n/ac basic-rates-a/g="" \ channel-width=20/40mhz-Ce country=russia2 disabled=no frequency-mode=\ regulatory-domain hw-retries=15 mode=station-wds nv2-preshared-key=\ 111 nv2-security=enabled radio-name=1111_1 rate-set=configured \ security-profile=profile1 ssid=1111 supported-rates-a/g="" tx-power=2 \ tx-power-mode=all-rates-fixed wds-default-bridge=bridge1 wds-mode=static \ wireless-protocol=nv2 wps-mode=disabled /interface wireless nstreme set wlan1 enable-nstreme=yes /interface bridge port add bridge=bridge1 interface=ether1 add bridge=bridge1 interface=wlan1 /ip address add address=172.20.20.3/24 interface=bridge1 network=172.20.20.0 /system identity set name=Office_1 /system leds set 0 interface=wlan1 /system routerboard settings set cpu-frequency=720MHz protected-routerboot=disabled Конфиг 3011: # jun/28/2016 20:10:06 by RouterOS 6.34.3 # software id = 4KKJ-VNHT # /interface bridge add name=bridge1 /interface bonding add arp-ip-targets=192.168.70.2 link-monitoring=none name=bonding1 slaves=ether2,ether3,ether4 /interface bridge port add bridge=bridge1 interface=ether5 add bridge=bridge1 interface=bonding1 /ip address add address=10.0.0.98/24 interface=bridge1 network=10.0.0.0 /system clock set time-zone-name=Asia/Krasnoyarsk /system identity set name=ROUTER_Office /system routerboard settings set protected-routerboot=disabled Edited June 28, 2016 by cameltrophy Вставить ник Quote
Fumo Posted June 28, 2016 Posted June 28, 2016 Как "размножали" клиентов? Копировали и разворачивали файл конфигурации? Вставить ник Quote
cameltrophy Posted June 29, 2016 Author Posted June 29, 2016 Нет, настраивал по очереди) Вставить ник Quote
cameltrophy Posted June 30, 2016 Author Posted June 30, 2016 (edited) Получилось сделать использовав EoIP, порты роутера в которые вставлены антенны добавил в бондинг с обеих сторон, прибил ip, затем между бондингами поднял eoip туннель и сбриджевал его с портом который смотрит в локалку с каждой стороны, все работает. Конфиг 3011: /interface bridge add name=bridge1 /interface eoip add !keepalive mac-address=02:E6:D5:18:16:64 name=eoip-tunnel1 remote-address=\ 192.168.20.2 tunnel-id=1 /interface bonding add arp-ip-targets=192.168.20.2 link-monitoring=arp name=bonding1 slaves=\ ether2,ether3,ether4 /interface bridge port add bridge=bridge1 interface=eoip-tunnel1 add bridge=bridge1 interface=ether5 /ip address add address=192.168.20.1/24 interface=bonding1 network=192.168.20.0 /ip dhcp-client add default-route-distance=0 dhcp-options=hostname,clientid disabled=no \ interface=bridge1 Конфиг SXT AP: /interface bridge add name=bridge1 /interface wireless security-profiles set [ find default=yes ] supplicant-identity=MikroTik add authentication-types=wpa-psk,wpa2-psk eap-methods="" management-protection=\ allowed mode=dynamic-keys name=profile1 supplicant-identity="" \ wpa-pre-shared-key=******** wpa2-pre-shared-key=********* /interface wireless set [ find default-name=wlan1 ] band=5ghz-onlyac basic-rates-a/g="" \ channel-width=20/40/80mhz-Ceee country=russia2 disabled=no frequency-mode=\ regulatory-domain hw-retries=15 mode=bridge multicast-helper=full \ nv2-preshared-key=******* nv2-security=enabled radio-name=1111 \ rate-set=configured security-profile=profile1 ssid=1111 \ supported-rates-a/g="" tdma-period-size=1 tx-power=2 tx-power-mode=\ all-rates-fixed wireless-protocol=nv2 wps-mode=disabled /interface wireless nstreme set wlan1 disable-csma=yes enable-nstreme=yes framer-policy=dynamic-size /interface bridge port add bridge=bridge1 interface=ether1 add bridge=bridge1 interface=wlan1 /ip address add address=172.20.20.10/24 interface=bridge1 network=172.20.20.0 Конфиг SXT Client: /interface bridge add name=bridge1 /interface wireless security-profiles set [ find default=yes ] supplicant-identity=MikroTik add authentication-types=wpa-psk,wpa2-psk eap-methods="" management-protection=\ allowed mode=dynamic-keys name=profile1 supplicant-identity="" \ wpa-pre-shared-key=******* wpa2-pre-shared-key=******** /interface wireless set [ find default-name=wlan1 ] band=5ghz-onlyac basic-rates-a/g="" \ channel-width=20/40/80mhz-Ceee country=russia2 disabled=no frequency-mode=\ regulatory-domain hw-retries=15 mode=station-bridge nv2-preshared-key=\ ******** nv2-security=enabled radio-name=1111_1 rate-set=configured \ security-profile=profile1 ssid=1111 supported-rates-a/g="" tx-power=2 \ tx-power-mode=all-rates-fixed wireless-protocol=nv2 wps-mode=disabled /interface wireless nstreme set wlan1 enable-nstreme=yes /interface bridge port add bridge=bridge1 interface=ether1 add bridge=bridge1 interface=wlan1 /ip address add address=172.20.20.11/24 interface=bridge1 network=172.20.20.0 Остальные 4 антенны настроены аналогично, только на других частотах Edited June 30, 2016 by cameltrophy Вставить ник Quote
.png.5d2afa2996cc6a85d0f2c09b92dd0a28.png)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.