RG-45 Posted May 17, 2016 (edited) · Report post Привет ! Свитч cisco WS-C2970G-24TS-E прошивка 12.2(25)SEB2 C2970-LANBASE-M Вставляю sfp dwi,dlink,nag не жует .... 4w6d: %GBIC_SECURITY_CRYPT-4-VN_DATA_CRC_ERROR: GBIC in port 65562 has bad crc Ребят помогите может есть софтик для него по новее . Выполнил команду no errdisable detect cause gbic-invalid не помогло ... Команд no errdisable detect cause sfp-config-mismatch и service unsupported-transceiver нет вообще ... Подскажитt как решить проблемку ! Благодарен за любую помощь !!! Edited May 17, 2016 by RG-45 Вставить ник Quote Ответить с цитированием Share this post Link to post Share on other sites More sharing options...
s.lobanov Posted May 17, 2016 · Report post софт актуальный залейте и попробуйте ещё раз service unsupported-transceiver Вставить ник Quote Ответить с цитированием Share this post Link to post Share on other sites More sharing options...
RG-45 Posted May 17, 2016 (edited) · Report post софт актуальный залейте и попробуйте ещё раз service unsupported-transceiver Где качнуть ? может есть у кого актуальный софт . Как я понял из гугления нужен софт c2970-lanbase-mz.122-44.SE6.bin Вот этот софт не подойдет ? c2970-lanbasek9-mz.122-44.SE6 Edited May 17, 2016 by RG-45 Вставить ник Quote Ответить с цитированием Share this post Link to post Share on other sites More sharing options...
ShyLion Posted May 17, 2016 (edited) · Report post service unsupported-transceiver нет вообще ... Ругается на ввод или просото в подсказке нет ? Команда недокументированая, нужнро просто ввести. sw-pleh-3fl24g16#show ver Cisco IOS Software, C2970 Software (C2970-LANBASEK9-M), Version 12.2(44)SE6, RELEASE SOFTWARE (fc1) Copyright (c) 1986-2009 by Cisco Systems, Inc. Compiled Mon 09-Mar-09 18:27 by gereddy Image text-base: 0x00003000, data-base: 0x01000000 ROM: Bootstrap program is C2970 boot loader BOOTLDR: C2970 Boot Loader (C2970-HBOOT-M) Version 12.1(14r)EA1a, RELEASE SOFTWARE (fc1) sw-pleh-3fl24g16 uptime is 3 years, 48 weeks, 5 days, 20 hours, 23 minutes System returned to ROM by power-on System restarted at 21:23:27 TYM Sun Jun 10 2012 System image file is "flash:c2970-lanbasek9-mz.122-44.SE6/c2970-lanbasek9-mz.122-44.SE6.bin" This product contains cryptographic features and is subject to United States and local country laws governing import, export, transfer and use. Delivery of Cisco cryptographic products does not imply third-party authority to import, export, distribute or use encryption. Importers, exporters, distributors and users are responsible for compliance with U.S. and local country laws. By using this product you agree to comply with applicable laws and regulations. If you are unable to comply with U.S. and local laws, return this product immediately. A summary of U.S. laws governing Cisco cryptographic products may be found at: http://www.cisco.com/wwl/export/crypto/tool/stqrg.html If you require further assistance please contact us by sending email to export@cisco.com. cisco WS-C2970G-24T-E (PowerPC405) processor (revision L0) with 122880K/8184K bytes of memory. Processor board ID xxx Last reset from power-on 2 Virtual Ethernet interfaces 24 Gigabit Ethernet interfaces The password-recovery mechanism is enabled. 512K bytes of flash-simulated non-volatile configuration memory. Base ethernet MAC Address : xxx Motherboard assembly number : 73-8754-08 Power supply part number : 341-0048-03 Motherboard serial number : xxx Power supply serial number : xxx Model revision number : L0 Motherboard revision number : A0 Model number : WS-C2970G-24T-E System serial number : xxxx Top Assembly Part Number : 800-23385-05 Top Assembly Revision Number : A0 Hardware Board Revision Number : 0x01 Switch Ports Model SW Version SW Image ------ ----- ----- ---------- ---------- * 1 24 WS-C2970G-24T-E 12.2(44)SE6 C2970-LANBASEK9-M Configuration register is 0xF sw-pleh-3fl24g16#conf t Enter configuration commands, one per line. End with CNTL/Z. sw-pleh-3fl24g16(config)#service unsupported-transceiver Warning: When Cisco determines that a fault or defect can be traced to the use of third-party transceivers installed by a customer or reseller, then, at Cisco's discretion, Cisco may withhold support under warranty or a Cisco support program. In the course of providing support for a Cisco networking product Cisco may require that the end user install Cisco transceivers if Cisco determines that removing third-party parts will assist Cisco in diagnosing the cause of a support issue. sw-pleh-3fl24g16(config)# Вот этот софт не подойдет ? c2970-lanbasek9-mz.122-44.SE6 Он самый крайний и есть вроде. Вон, выше, аптайм 3 года ;) Edited May 17, 2016 by ShyLion Вставить ник Quote Ответить с цитированием Share this post Link to post Share on other sites More sharing options...
RG-45 Posted May 17, 2016 · Report post service unsupported-transceiver нет вообще ... Ругается на ввод или просото в подсказке нет ? Команда недокументированая, нужнро просто ввести. sw-pleh-3fl24g16#show ver Cisco IOS Software, C2970 Software (C2970-LANBASEK9-M), Version 12.2(44)SE6, RELEASE SOFTWARE (fc1) Copyright (c) 1986-2009 by Cisco Systems, Inc. Compiled Mon 09-Mar-09 18:27 by gereddy Image text-base: 0x00003000, data-base: 0x01000000 ROM: Bootstrap program is C2970 boot loader BOOTLDR: C2970 Boot Loader (C2970-HBOOT-M) Version 12.1(14r)EA1a, RELEASE SOFTWARE (fc1) sw-pleh-3fl24g16 uptime is 3 years, 48 weeks, 5 days, 20 hours, 23 minutes System returned to ROM by power-on System restarted at 21:23:27 TYM Sun Jun 10 2012 System image file is "flash:c2970-lanbasek9-mz.122-44.SE6/c2970-lanbasek9-mz.122-44.SE6.bin" This product contains cryptographic features and is subject to United States and local country laws governing import, export, transfer and use. Delivery of Cisco cryptographic products does not imply third-party authority to import, export, distribute or use encryption. Importers, exporters, distributors and users are responsible for compliance with U.S. and local country laws. By using this product you agree to comply with applicable laws and regulations. If you are unable to comply with U.S. and local laws, return this product immediately. A summary of U.S. laws governing Cisco cryptographic products may be found at: http://www.cisco.com/wwl/export/crypto/tool/stqrg.html If you require further assistance please contact us by sending email to export@cisco.com. cisco WS-C2970G-24T-E (PowerPC405) processor (revision L0) with 122880K/8184K bytes of memory. Processor board ID xxx Last reset from power-on 2 Virtual Ethernet interfaces 24 Gigabit Ethernet interfaces The password-recovery mechanism is enabled. 512K bytes of flash-simulated non-volatile configuration memory. Base ethernet MAC Address : xxx Motherboard assembly number : 73-8754-08 Power supply part number : 341-0048-03 Motherboard serial number : xxx Power supply serial number : xxx Model revision number : L0 Motherboard revision number : A0 Model number : WS-C2970G-24T-E System serial number : xxxx Top Assembly Part Number : 800-23385-05 Top Assembly Revision Number : A0 Hardware Board Revision Number : 0x01 Switch Ports Model SW Version SW Image ------ ----- ----- ---------- ---------- * 1 24 WS-C2970G-24T-E 12.2(44)SE6 C2970-LANBASEK9-M Configuration register is 0xF sw-pleh-3fl24g16#conf t Enter configuration commands, one per line. End with CNTL/Z. sw-pleh-3fl24g16(config)#service unsupported-transceiver Warning: When Cisco determines that a fault or defect can be traced to the use of third-party transceivers installed by a customer or reseller, then, at Cisco's discretion, Cisco may withhold support under warranty or a Cisco support program. In the course of providing support for a Cisco networking product Cisco may require that the end user install Cisco transceivers if Cisco determines that removing third-party parts will assist Cisco in diagnosing the cause of a support issue. sw-pleh-3fl24g16(config)# Вот этот софт не подойдет ? c2970-lanbasek9-mz.122-44.SE6 Он самый крайний и есть вроде. Вон, выше, аптайм 3 года ;) Спасибо ! обновился выполнил команды ! Но линк не поднялся завтра поеду посмотрю наверно надо передернуть sfp , плюс проверю оптический линк . Вставить ник Quote Ответить с цитированием Share this post Link to post Share on other sites More sharing options...
s.lobanov Posted May 17, 2016 · Report post RG-45 Покажите show log и show int ... shut/no shut сделали? Вставить ник Quote Ответить с цитированием Share this post Link to post Share on other sites More sharing options...
RG-45 Posted May 17, 2016 · Report post RG-45 Покажите show log и show int ... shut/no shut сделали? Конечно сделали .... show interfaces gigabitEthernet 0/26 GigabitEthernet0/26 is down, line protocol is down (notconnect) Hardware is Gigabit Ethernet, address is 0014.f27b.d69a (bia 0014.f27b.d69a) MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive not set Auto-duplex, Auto-speed, link type is auto, media type is unknown input flow-control is off, output flow-control is unsupported ARP type: ARPA, ARP Timeout 04:00:00 Last input never, output never, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 0 packets input, 0 bytes, 0 no buffer Received 0 broadcasts (0 multicasts) 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 0 multicast, 0 pause input 0 input packets with dribble condition detected 0 packets output, 0 bytes, 0 underruns 0 output errors, 0 collisions, 11 interface resets 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 PAUSE output 0 output buffer failures, 0 output buffers swapped out show log 04:59:22: %LINK-5-CHANGED: Interface GigabitEthernet0/26, changed state to administratively down 04:59:31: %LINK-3-UPDOWN: Interface GigabitEthernet0/26, changed state to down Вставить ник Quote Ответить с цитированием Share this post Link to post Share on other sites More sharing options...
