[agnitumus]

Итак имеем боевой сервер FreeBSD 9.1-STABLE на нем MPD5(pppoe) + Freeradius

Происходит непонятная проблема

 

 

 

В этот момент

 

 

 

---

 

dmesg

Copyright © 1992-2013 The FreeBSD Project.

Copyright © 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994

The Regents of the University of California. All rights reserved.

FreeBSD is a registered trademark of The FreeBSD Foundation.

FreeBSD 9.1-STABLE #4 r249588M: Sun Feb 7 13:47:25 EET 2016

agnitumus@gate.aida.net.ua:/usr/obj/usr/src/sys/GATE amd64

gcc version 4.2.1 20070831 patched [FreeBSD]

CPU: Intel® Xeon® CPU E31240 @ 3.30GHz (3292.60-MHz K8-class CPU)

Origin = "GenuineIntel" Id = 0x206a7 Family = 0x6 Model = 0x2a Stepping = 7

Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>

Features2=0x1fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX>

AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>

AMD Features2=0x1<LAHF>

TSC: P-state invariant, performance statistics

real memory = 4294967296 (4096 MB)

avail memory = 4058566656 (3870 MB)

Event timer "LAPIC" quality 600

ACPI APIC Table: <HP ProLiant>

FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs

FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 SMT threads

cpu0 (BSP): APIC ID: 0

cpu1 (AP): APIC ID: 1

cpu2 (AP): APIC ID: 2

cpu3 (AP): APIC ID: 3

cpu4 (AP): APIC ID: 4

cpu5 (AP): APIC ID: 5

cpu6 (AP): APIC ID: 6

cpu7 (AP): APIC ID: 7

ACPI Warning: Invalid length for Pm1aControlBlock: 32, using default 16 (20110527/tbfadt-638)

ACPI Warning: Invalid length for Pm2ControlBlock: 32, using default 8 (20110527/tbfadt-638)

ioapic0: Changing APIC ID to 8

ioapic0 <Version 2.0> irqs 0-23 on motherboard

netisr_init: forcing maxthreads to 1 and bindthreads to 0 for device polling

kbd1 at kbdmux0

acpi0: <HP ProLiant> on motherboard

acpi0: Power Button (fixed)

cpu0: <ACPI CPU> on acpi0

cpu1: <ACPI CPU> on acpi0

cpu2: <ACPI CPU> on acpi0

cpu3: <ACPI CPU> on acpi0

cpu4: <ACPI CPU> on acpi0

cpu5: <ACPI CPU> on acpi0

cpu6: <ACPI CPU> on acpi0

cpu7: <ACPI CPU> on acpi0

attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0

Timecounter "i8254" frequency 1193182 Hz quality 0

Event timer "i8254" frequency 1193182 Hz quality 100

hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0

Timecounter "HPET" frequency 14318180 Hz quality 950

Event timer "HPET" frequency 14318180 Hz quality 550

atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0

Event timer "RTC" frequency 32768 Hz quality 0

Timecounter "ACPI-safe" frequency 3579545 Hz quality 850

acpi_timer0: <24-bit timer at 3.579545MHz> port 0x908-0x90b on acpi0

pcib0: <ACPI Host-PCI bridge> on acpi0

pci0: <ACPI PCI bus> on pcib0

pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0

pci4: <ACPI PCI bus> on pcib1

pcib2: <ACPI PCI-PCI bridge> at device 6.0 on pci0

pci7: <ACPI PCI bus> on pcib2

pci0: <serial bus, USB> at device 26.0 (no driver attached)

pcib3: <ACPI PCI-PCI bridge> at device 28.0 on pci0

pci10: <ACPI PCI bus> on pcib3

pcib4: <ACPI PCI-PCI bridge> at device 28.4 on pci0

pci2: <ACPI PCI bus> on pcib4

em0: <Intel® PRO/1000 Network Connection 7.3.7> port 0x4000-0x401f mem 0xfbee0000-0xfbefffff,0xfbed0000-0xfbed3fff irq 16 at device 0.0 on pci2

em0: MSIX: incorrect vectors, using MSI

em0: No MSI/MSIX using a Legacy IRQ

em0: Ethernet address: 00:9c:02:9b:ce:08

pcib5: <ACPI PCI-PCI bridge> at device 28.5 on pci0

pci3: <ACPI PCI bus> on pcib5

em1: <Intel® PRO/1000 Network Connection 7.3.7> port 0x5000-0x501f mem 0xfbfe0000-0xfbffffff,0xfbfd0000-0xfbfd3fff irq 17 at device 0.0 on pci3

em1: MSIX: incorrect vectors, using MSI

em1: No MSI/MSIX using a Legacy IRQ

em1: Ethernet address: 00:9c:02:9b:ce:09

pcib6: <ACPI PCI-PCI bridge> at device 28.6 on pci0

pci13: <ACPI PCI bus> on pcib6

pcib7: <ACPI PCI-PCI bridge> at device 28.7 on pci0

pci1: <ACPI PCI bus> on pcib7

pci1: <base peripheral> at device 0.0 (no driver attached)

vgapci0: <VGA-compatible display> mem 0xf9000000-0xf9ffffff,0xfbde0000-0xfbde3fff,0xfb000000-0xfb7fffff irq 16 at device 0.1 on pci1

pci1: <base peripheral> at device 0.2 (no driver attached)

pci1: <serial bus, USB> at device 0.4 (no driver attached)

pci0: <serial bus, USB> at device 29.0 (no driver attached)

pcib8: <PCI-PCI bridge> at device 30.0 on pci0

pci19: <PCI bus> on pcib8

isab0: <PCI-ISA bridge> at device 31.0 on pci0

isa0: <ISA bus> on isab0

atapci0: <Intel Cougar Point SATA300 controller> port 0x1400-0x1407,0x1408-0x140b,0x1410-0x1417,0x1418-0x141b,0x1420-0x142f,0x1430-0x143f irq 17 at device 31.2 on pci0

ata2: <ATA channel> at channel 0 on atapci0

ata3: <ATA channel> at channel 1 on atapci0

atapci1: <Intel Cougar Point SATA300 controller> port 0x1440-0x1447,0x1448-0x144b,0x1450-0x1457,0x1458-0x145b,0x1460-0x146f,0x1470-0x147f irq 17 at device 31.5 on pci0

ata4: <ATA channel> at channel 0 on atapci1

ata5: <ATA channel> at channel 1 on atapci1

acpi_tz0: <Thermal Zone> on acpi0

atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0

atkbd0: <AT Keyboard> irq 1 on atkbdc0

kbd0 at atkbd0

atkbd0: [GIANT-LOCKED]

uart0: <Non-standard ns8250 class UART with FIFOs> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0

orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xcafff on isa0

sc0: <System console> at flags 0x100 on isa0

sc0: VGA <16 virtual consoles, flags=0x300>

vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0

ppc0: cannot reserve I/O port range

uart1: <Non-standard ns8250 class UART with FIFOs> at port 0x2f8-0x2ff irq 3 on isa0

est0: <Enhanced SpeedStep Frequency Control> on cpu0

est: CPU supports Enhanced Speedstep, but is not recognized.

est: cpu_vendor GenuineIntel, msr 28d500002200

device_attach: est0 attach returned 6

p4tcc0: <CPU Frequency Thermal Control> on cpu0

est1: <Enhanced SpeedStep Frequency Control> on cpu1

est: CPU supports Enhanced Speedstep, but is not recognized.

est: cpu_vendor GenuineIntel, msr 28d500002200

device_attach: est1 attach returned 6

p4tcc1: <CPU Frequency Thermal Control> on cpu1

est2: <Enhanced SpeedStep Frequency Control> on cpu2

est: CPU supports Enhanced Speedstep, but is not recognized.

est: cpu_vendor GenuineIntel, msr 28d500002200

device_attach: est2 attach returned 6

p4tcc2: <CPU Frequency Thermal Control> on cpu2

est3: <Enhanced SpeedStep Frequency Control> on cpu3

est: CPU supports Enhanced Speedstep, but is not recognized.

est: cpu_vendor GenuineIntel, msr 28d500002200

device_attach: est3 attach returned 6

p4tcc3: <CPU Frequency Thermal Control> on cpu3

est4: <Enhanced SpeedStep Frequency Control> on cpu4

est: CPU supports Enhanced Speedstep, but is not recognized.

est: cpu_vendor GenuineIntel, msr 28d500002200

device_attach: est4 attach returned 6

p4tcc4: <CPU Frequency Thermal Control> on cpu4

est5: <Enhanced SpeedStep Frequency Control> on cpu5

est: CPU supports Enhanced Speedstep, but is not recognized.

est: cpu_vendor GenuineIntel, msr 28d500002200

device_attach: est5 attach returned 6

p4tcc5: <CPU Frequency Thermal Control> on cpu5

est6: <Enhanced SpeedStep Frequency Control> on cpu6

est: CPU supports Enhanced Speedstep, but is not recognized.

est: cpu_vendor GenuineIntel, msr 28d500002200

device_attach: est6 attach returned 6

p4tcc6: <CPU Frequency Thermal Control> on cpu6

est7: <Enhanced SpeedStep Frequency Control> on cpu7

est: CPU supports Enhanced Speedstep, but is not recognized.

est: cpu_vendor GenuineIntel, msr 28d500002200

device_attach: est7 attach returned 6

p4tcc7: <CPU Frequency Thermal Control> on cpu7

Timecounters tick every 1.000 msec

IP Filter: v4.1.28 initialized. Default = pass all, Logging = enabled

ipfw2 initialized, divert enabled, nat enabled, default to accept, logging disabled

DUMMYNET 0 with IPv6 initialized (100409)

load_dn_sched dn_sched FIFO loaded

load_dn_sched dn_sched PRIO loaded

load_dn_sched dn_sched QFQ loaded

load_dn_sched dn_sched RR loaded

load_dn_sched dn_sched WF2Q+ loaded

ada0 at ata2 bus 0 scbus0 target 0 lun 0

ada0: <VB0250EAVER HPG7> ATA-8 SATA 2.x device

ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)

ada0: 238475MB (488397168 512 byte sectors: 16H 63S/T 16383C)

ada0: Previously was known as ad4

ada1 at ata3 bus 0 scbus1 target 0 lun 0

ada1: <VB0250EAVER HPG7> ATA-8 SATA 2.x device

ada1: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)

ada1: 238475MB (488397168 512 byte sectors: 16H 63S/T 16383C)

ada1: Previously was known as ad6

SMP: AP CPU #1 Launched!

cd0 at ata5 bus 0 scbus3 target 0 lun 0

cd0: <hp DVD-ROM TS-H353C JG02> Removable CD-ROM SCSI-0 device

SMP: AP CPU #3 Launched!

cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)

cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed

SMP: AP CPU #7 Launched!

SMP: AP CPU #4 Launched!

SMP: AP CPU #6 Launched!

SMP: AP CPU #5 Launched!

SMP: AP CPU #2 Launched!

Timecounter "TSC-low" frequency 1646298649 Hz quality 1000

GEOM_MIRROR: Device mirror/boot launched (2/2).

GEOM_MIRROR: Device mirror/root launched (2/2).

GEOM_MIRROR: Device mirror/swap launched (2/2).

Trying to mount root from ufs:/dev/mirror/root [rw]...

 

 

 

loader.conf

kern.maxusers=2048

kern.maxfiles=204800

kern.maxfilesperproc=200000

 

kern.ipc.nmbclusters=132768

kern.ipc.maxsockets=409600

kern.ipc.maxpipekva=70000000

kern.ipc.somaxconn=8388608

kern.ipc.maxsockets=409600

kern.ipc.nmbclusters=1582428

net.inet.tcp.tcbhashsize=65535

 

# EM tuning

hw.em.rxd=4096

hw.em.txd=4096

hw.em.rx_process_limit=4096

hw.em.fc_setting=0

#hw.em.max_interrupt_rate=32000

dev.em.0.rx_int_delay=250

dev.em.0.tx_int_delay=250

dev.em.0.rx_abs_int_delay=4000

dev.em.0.tx_abs_int_delay=4000

dev.em.1.rx_int_delay=250

dev.em.1.tx_int_delay=250

dev.em.1.rx_abs_int_delay=4000

dev.em.1.tx_abs_int_delay=4000

 

# Networking

net.isr.maxthreads=8

net.isr.bindthreads=1

net.isr.defaultqlimit=8192

net.inet.tcp.tcbhashsize=32000

net.link.ifqmaxlen=10240

net.inet.tcp.tso=0

 

hw.pci.enable_msix=1

hw.pci.enable_msi=1

 

net.graph.maxdata=256000

net.graph.maxalloc=256000

net.graph.threads=4

 

net.isr.maxthreads=4

net.isr.bindthreads=0

hw.em.max_interrupt_rate=32000

 

 

sysctl.conf

 

net.inet.ip.fw.autoinc_step=10

net.inet.ip.fw.one_pass=0

net.inet.ip.forwarding=1

net.inet.ip.fastforwarding=1

net.inet.ip.dummynet.expire=0

net.inet.ip.dummynet.hash_size=65535

net.inet.ip.dummynet.io_fast=1

net.inet.ip.check_interface=1

net.inet.ip.intr_queue_maxlen=1024

net.inet.tcp.msl=65535

net.inet.tcp.blackhole=2

net.inet.tcp.sack.enable=0

net.inet.tcp.sendspace=231072

net.inet.tcp.recvspace=231072

net.inet.udp.blackhole=1

net.inet.icmp.drop_redirect=1

net.inet.icmp.log_redirect=0

net.inet.icmp.icmplim=10000

net.inet.icmp.maskrepl=0.

net.graph.maxdgram=18388680

net.graph.recvspace=18388680

net.link.ether.inet.log_arp_permanent_modify=0

net.link.ether.inet.log_arp_movements=0

net.link.ether.inet.log_arp_wrong_iface=0

net.link.ether.ipfw=0

kern.ipc.maxsockbuf=23175936

net.isr.dispatch=direct

 

net.inet.udp.blackhole=0

net.inet.ip.redirect=0

net.inet.tcp.delayed_ack=0

net.inet.tcp.recvbuf_max=16777216

net.inet.tcp.sendbuf_max=16777216

net.inet.tcp.drop_synfin=1

net.inet.tcp.nolocaltimewait=1

net.inet.ip.sourceroute=0

net.inet.ip.accept_sourceroute=0

net.inet.udp.recvspace=64080

net.inet.ip.rtmaxcache=1024

kern.ipc.nmbclusters=1824288

kern.ipc.maxsockbuf=183886080

kern.ipc.maxsockets=102400

net.local.stream.recvspace=32768

net.local.stream.sendspace=32768

kern.ipc.somaxconn=32768

net.inet.tcp.maxtcptw=65535

net.inet.tcp.sendbuf_inc=16384

net.inet.tcp.recvbuf_inc=524288

# IPFW

net.inet.ip.fw.dyn_max=65535

net.inet.ip.fw.dyn_buckets=2048

net.inet.ip.fw.dyn_syn_lifetime=10

net.inet.ip.fw.dyn_ack_lifetime=120

net.inet.ip.fw.verbose=0

# Dummynet

net.inet.ip.dummynet.hash_size=65536

net.inet.ip.dummynet.pipe_slot_limit=1000

# ICMP

net.inet.icmp.bmcastecho=0

net.inet.icmp.maskrepl=0

# /dev/random optimize networking

kern.random.sys.harvest.ethernet=0

kern.random.sys.harvest.point_to_point=0

kern.random.sys.harvest.interrupt=0

net.inet.raw.maxdgram=16384

net.inet.raw.recvspace=16384

net.route.netisr_maxqlen=8192

net.inet.ip.intr_queue_maxlen=10240

net.isr.dispatch=deferred

net.inet.icmp.icmplim=65535

kern.ipc.somaxconn=65535

kern.ipc.nmbjumbop=15824288

net.inet.tcp.tso=0

net.inet.tcp.syncache.rexmtlimit=10

net.graph.maxalloc=256000

net.inet.icmp.icmplim=50

net.inet.icmp.icmplim_output=0

net.inet.tcp.icmp_may_rst=0

net.local.stream.sendspace=65535

net.local.stream.recvspace=65536

hw.intr_storm_threshold=9000

net.link.ether.inet.max_age=600

dev.em.0.fc=0

dev.em.1.fc=0

dev.em.0.rx_int_delay=200

dev.em.0.tx_int_delay=200

dev.em.0.rx_abs_int_delay=4000

dev.em.0.tx_abs_int_delay=4000

dev.em.0.rx_processing_limit=4096

dev.em.0.max_interrupt_rate=32000

dev.em.1.rx_int_delay=200

dev.em.1.tx_int_delay=200

dev.em.1.rx_abs_int_delay=4000

dev.em.1.tx_abs_int_delay=4000

dev.em.1.rx_processing_limit=4096

dev.em.1.max_interrupt_rate=32000

 

 

Если что-то лишнее подскажите

 

mpd5.conf

 

startup:

set user admin admin admin

set console self 127.0.0.1 5005

set console open

set web self 0.0.0.0.

set web open

set radsrv peer 172.16.0.2 aidaradmpd

set radsrv open

set radsrv enable coa disconnect

log -all

default:

load def_conf

def_conf:

create bundle template B

set iface enable proxy-arp

set bundle disable compression

set iface idle 0

set iface disable on-demand..

set iface enable tcpmssfix

set ipcp yes vjcomp

set ippool add aidapool 10.0.0.10 10.0.3.254.

set ipcp ranges X.Y.Z.0/32 ippool aidapool.

set ipcp dns X.Y.Z.1 X.Y.Z.2

set ipcp nbns X.Y.Z.1 X.Y.Z.2

 

load PPPoE

 

PPPoE:

create link template PPPoE pppoe

set pppoe iface em0

set pppoe service "*"

set pppoe mac-format unix-like

set link disable peer-as-calling

set link disable multilink

set link action bundle B

set link mtu 1459

set link max-children 2000

 

#set link no pap eap

#set link enable chap

set link disable chap pap eap

set link enable pap

set link no acfcomp protocomp

set link keep-alive 10 120.

set link enable incoming

load radius

 

radius:

set radius server localhost radpwd 1812 1813

set radius retries 5

set radius timeout 10

set radius enable message-authentic

set auth acct-update 600

set auth enable radius-auth....

set auth enable radius-acct

 

set ipcp enable radius-ip.

set iface enable radius-idle radius-session radius-mtu radius-route.

set ccp enable radius

 

set auth disable internal

set auth disable acct-mandatory

 

 

если что-то еще нужно, говорите выложу !

вообще из-за чего lo0 может иметь высокий пинг и потери ?

Заранее спасибо

 

 

P.S:

lspci

00:00.0 Host bridge: Intel Corporation Xeon E3-1200 Processor Family DRAM Controller (rev 09)

00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09)

00:06.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09)

00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05)

00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5)

00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b5)

00:1c.5 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 (rev b5)

00:1c.6 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 7 (rev b5)

00:1c.7 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 (rev b5)

00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05)

00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a5)

00:1f.0 ISA bridge: Intel Corporation C204 Chipset Family LPC Controller (rev 05)

00:1f.2 IDE interface: Intel Corporation 6 Series/C200 Series Chipset Family 4 port SATA IDE Controller (rev 05)

00:1f.5 IDE interface: Intel Corporation 6 Series/C200 Series Chipset Family 2 port SATA IDE Controller (rev 05)

01:00.0 System peripheral: Hewlett-Packard Company Integrated Lights-Out Standard Slave Instrumentation & System Support (rev 05)

01:00.1 VGA compatible controller: Matrox Electronics Systems Ltd. MGA G200EH

01:00.2 System peripheral: Hewlett-Packard Company Integrated Lights-Out Standard Management Processor Support and Messaging (rev 05)

01:00.4 USB controller: Hewlett-Packard Company Integrated Lights-Out Standard Virtual USB Controller (rev 02)

02:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection

03:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection

 

Edited February 9, 2016 by agnitumus

[rdc]

прежде всего - вырубите в биосе hyperthreading.

и выложите ещё раз те же скрины

[agnitumus]

прежде всего - вырубите в биосе hyperthreading.

и выложите ещё раз те же скрины

Спасибо !

Обязательно сегодня попробую ...

 

Попутный вопрос:

Это нормально ?

Сервер другой ...

Edited February 8, 2016 by agnitumus

[Ivan_83]

Чем больше ядер - тем больше накладных расходов.

 

net.inet.tcp.

net.inet.udp.

net.inet.raw.

net.inet.icmp.

Никак не влияют на пакеты которые роутятся/натятся, это только для случая когда этот хост учавствует в соединении в качестве конечной точки.

net.inet.tcp.sack.enable=0 - это зло, на мой взгляд, при дропах скорость передачи с хоста/на хост будет хреновой, но если на него только по ссш ходят по админить то пофик.

[kosmich7]

Происходит непонятная проблема

Поставьте нормальную igb сетевую.

 

Это нормально ?

Сервер другой ...

Сокет 2011, два проца, мать какая модель ?

[agnitumus]

Происходит непонятная проблема

Поставьте нормальную igb сетевую.

 

Это нормально ?

Сервер другой ...

Сокет 2011, два проца, мать какая модель ?

ProLiant DL380p Gen8

2xIntel® Xeon® CPU E5-2620 v2 @ 2.10GHz

 

Сеточки

03:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5719 Gigabit Ethernet PCIe (rev 01)

03:00.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5719 Gigabit Ethernet PCIe (rev 01)

03:00.2 Ethernet controller: Broadcom Corporation NetXtreme BCM5719 Gigabit Ethernet PCIe (rev 01)

03:00.3 Ethernet controller: Broadcom Corporation NetXtreme BCM5719 Gigabit Ethernet PCIe (rev 01)

07:00.0 Ethernet controller: Intel Corporation 82599ES 10-Gigabit SFI/SFP+ Network Connection (rev 01)

07:00.1 Ethernet controller: Intel Corporation 82599ES 10-Gigabit SFI/SFP+ Network Connection (rev 01) <-- ix1 только через него трафик

 

 

ifconfig ix1

ix1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500

options=407bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWTSO>

ether 90:e2:ba:97:ab:21

inet 10.0.0.1 netmask 0xffff0000 broadcast 10.0.255.255

inet 10.1.0.1 netmask 0xffff0000 broadcast 10.1.255.255

media: Ethernet autoselect (10Gbase-SR <full-duplex>)

status: active

 

Edited February 9, 2016 by agnitumus

[agnitumus]

прежде всего - вырубите в биосе hyperthreading.

и выложите ещё раз те же скрины

 

Спасибо !

Никто и нигде не пишет о том. что hyperthreading может мешать работе ... Надеюсь помогло =)

Edited February 9, 2016 by agnitumus

[GrandPr1de]

прежде всего - вырубите в биосе hyperthreading.

и выложите ещё раз те же скрины

 

Спасибо !

Никто и нигде не пишет о том. что hyperthreading может мешать работе ... Надеюсь помогло =)

 

на форумах вечно обсасывают эту проблему

и обычно первое предложение в таких темах "выруби hyperthreading"

 

 

 

[kosmich7]

Попутный вопрос:

 

Это нормально ?

Сервер другой ...

Стоп. Давайте по порядку. ОСь, top -SH ?

 

 

ProLiant DL380p Gen8

2xIntel® Xeon® CPU E5-2620 v2 @ 2.10GHz

Что в топе смущает ? У меня при приближении чуть выше этих цифр в топе при двух линках ix сервер начинал скукоживаться.

Выньте один проц должно полегчать, в моем случае так и случилось.

А трафа сколько netstat -hw1 -I ix0 ?

 

прежде всего - вырубите в биосе hyperthreading.

и выложите ещё раз те же скрины

 

Спасибо !

Никто и нигде не пишет о том. что hyperthreading может мешать работе ... Надеюсь помогло =)

 

на форумах вечно обсасывают эту проблему

и обычно первое предложение в таких темах "выруби hyperthreading"

И чем вырубание помогает ? :)

[agnitumus]

Стоп. Давайте по порядку. ОСь, top -SH ?

Думаю попробую вынуть проц ...

 

И чем вырубание помогает ? :)

В моёем случае: больше пинг на локальной петле не подымался ... (надеюсь пермаментно)

[kosmich7]

Думаю попробую вынуть проц ...

Помогло ? Как вопрос решился ?