[unfraget]

Здравия всем!

 

Коллеги, имеется дивайс cisco me 6524, который давича ушел в rommon,

Причем как-то странно

 

Первая загрузка проходит, видит диски flash, bootflash с образами, после выполнения boot вновь сваливается в rammon, и вот уже кроме как crash info ничего нет.

В чем может быть проблема? И как восстановить?

 

rommon 1 > dev

Devices in device table:
       id  name
bootflash:  boot flash                 
   disk0:  ATA slot 0                 
   disk1:  ATA slot 1                 
   eprom:  eprom

rommon 2 > dir bootflash:

        File size           Checksum   File name
 24954276 bytes (0x17cc5a4)  0x8d7401e0    s6523-ipbase-mz.122-33.SXH3.bin
 31601156 bytes (0x1e23204)  0xa2d145f6    s6523-advipservicesk9-mz.122-33.SXH6.bin
   281501 bytes (0x44b9d)    0xe8b190f9    crashinfo_20101007-230345

rommon 5 > dir disk0:

Initializing ATA monitor library...
Directory of disk0:

2      31601156  -rw-     BOOT.BIN

 

rommon 6 > boot

Self extracting the image... [OK]
Self decompressing the image : ########################################################################################################################################### [OK]

             Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

          cisco Systems, Inc.
          170 West Tasman Drive
          San Jose, California 95134-1706



Cisco IOS Software, s6523_sp Software (s6523_sp-IPBASE-M), Version 12.2(33)SXH3, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2008 by Cisco Systems, Inc.
Compiled Thu 24-Jul-08 17:20 by prod_rel_team
Image text-base: 0x40231348, data-base: 0x41A76130

MAC based EOBC installed

00:00:08: %SYS-3-LOGGER_FLUSHING: System pausing to ensure console debugging output.

00:00:08: %PFREDUN-6-ACTIVE: Initializing as ACTIVE processor for this switch

00:00:13: %SYS-SP-3-LOGGER_FLUSHING: System pausing to ensure console debugging output.

00:00:09: %SYS-3-LOGGER_FLUSHED: System was paused for 00:00:00 to ensure console debugging output.


Firmware compiled 28-Jun-08 09:47 by integ Build [100]


00:00:13: %OIR-SP-6-CONSOLE: Changing console ownership to route processor



System Bootstrap, Version 12.2(17r)SX3, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2004 by cisco Systems, Inc.
Cat6k-MSFC2A platform with 1048576 Kbytes of main memory

 

rommon 1 > dev

Devices in device table:
       id  name
bootflash:  boot flash                 
   slot0:  PCMCIA slot 0              
   eprom:  eprom

rommon 2 > dir bootflash:

        File size           Checksum   File name
    58368 bytes (0xe400)     0xffffffff    crashinfo_20101007-230319 (invalid)

rommon 3 > dir slot0:

PCMCIA slot0 device is not initialized
open: read error...requested 0x4 bytes, got 0x0
trouble reading device magic number
dir: cannot open device "slot0:"

Edited January 21, 2016 by unfraget

[unfraget]

Пробовал менять память, флешку, результат один