[panolex]

Доброго времени суток всем.

 

asr1000-rp2, после обновления rommon с 15.2(1r)S до 15.3(1r)S вылезло следующее:

 

 

 

Initializing Hardware ...

 

 

 

FPGA load not complete !!!

 

Calculating the ROMMON CRC ... CRC is correct

 

 

 

System Bootstrap, Version 15.3(1r)S, RELEASE SOFTWARE (fc1)

 

Copyright © 1994-2012 by cisco Systems, Inc.

 

 

 

CPLD Version: 1 (MM/DD/YY): 09/24/13 ASR1000-RP2 Slot:0

 

 

 

Current image running: Boot ROM1

 

Last reset cause: Watchdog/ICH

 

Reading confreg 0x8000

 

 

 

Reading monitor variables from NVRAM

 

Enabling interrupts

 

Clearing CMOS RAM ...

 

Initializing SATA controller...done

 

Initializing USB host controller...done

 

Checking for PCIe device presence...

 

Did not recognize HT/FPGA. Got 0xffffffff, Expected 0x00201137

 

done

 

 

 

ASR1000-RP2 platform with 8388608 Kbytes of main memory

 

 

 

autoboot entry: NVRAM VALUES: bootconf: 0x0, autobootstate: 0

 

autobootcount: 0, autobootsptr: 0x0

 

Scooby PartNum read error, expected :0x7b2245, read 0x000000

 

Failed to read PCA8550 EEPROM DIP device

 

rommon 1 >

 

 

при попытке бута чего-либо получается такое:

 

 

rommon 3 > boot harddisk:asr1000rp2-ipbase.03.08.01.S.153-1.S1.bin

 

Scooby PartNum read error, expected :0x7b2245, read 0x000000

 

Failed to read PCA8550 EEPROM DIP device

 

Warning: filesystem is not clean

 

File size is 0x202492f4

 

Located asr1000rp2-ipbase.03.08.01.S.153-1.S1.bin

 

Image size 539267828 inode num 12, bks cnt 131658 blk size 8*512

 

###################################################################################################################

 

Booting image with bootparam="root=/dev/ram rw console=ttyS2,9600 max_loop=64 crashkernel=128M@16M SR_BOOT=harddi"

 

Boot image size = 539267828 (0x202492f4) bytes

 

Scooby PartNum read error, expected :0x7b2245, read 0x000000

 

 

 

get_mac_addr: Couldn't find a valid macaddr

 

 

 

Image Base is: 0x000000005d1b2018

 

Image Size is: 0x202492f4

 

 

 

Package header rev 0 structure detected

 

Calculating SHA-1 hash...done

 

validate_package: SHA-1 hash:

 

calculated e81a464d:cd070986:06d4270b:bcf3c8d2:385e4ba7

 

expected e81a464d:cd070986:06d4270b:bcf3c8d2:385e4ba7

 

Package type:30000, flags:0x0

 

Parsing package TLV info:

 

000: 00000009:0000001d:4b45595f:544c565f - KEY_TLV_

 

010: 5041434b:4147455f:434f4d50:41544942 - PACKAGE_COMPATIB

 

020: 494c4954:59000000:00000009:0000000b - ILITY

 

030: 4652555f:52505f54:59504500:00000009 - FRU_RP_TYPE

 

040: 00000018:4b45595f:544c565f:5041434b - KEY_TLV_PACK

 

050: 4147455f:424f4f54:41524348:00000009 - AGE_BOOTARCH

 

060: 0000000e:41524348:5f693638:365f5459 - ARCH_i686_TY

 

070: 50450000:00000009:00000014:4b45595f - PE KEY_

 

080: 544c565f:424f4152:445f434f:4d504154 - TLV_BOARD_COMPAT

 

090: 00000009:0000000e:424f4152:445f7270 - BOARD_rp

 

0a0: 325f5459:50450000:00000009:00000018 - 2_TYPE

 

0b0: 4b45595f:544c565f:43525950:544f5f4b - KEY_TLV_CRYPTO_K

 

0c0: 45595354:52494e47:00000009:00000004 - EYSTRING

 

 

 

TLV(0): T=9, L=29, V=KEY_TLV_PACKAGE_COMPATIBILITY

 

FRU Key detected

 

TLV(1): T=9, L=11, V=FRU_RP_TYPE

 

found package fru type FRU_RP_TYPE

 

TLV(2): T=9, L=24, V=KEY_TLV_PACKAGE_BOOTARCH

 

ARCH Key detected

 

TLV(3): T=9, L=14, V=ARCH_i686_TYPE

 

found package arch type ARCH_i686_TYPE

 

TLV(4): T=9, L=20, V=KEY_TLV_BOARD_COMPAT

 

TLV(5): T=9, L=14, V=BOARD_rp2_TYPE

 

TLV(6): T=9, L=24, V=KEY_TLV_CRYPTO_KEYSTRING

 

TLV(7): T=9, L=4, V=none

 

skipping unknown TLV type 201326592

 

Image validated

 

%IOSXEBOOT-4-FILESYS_ERRORS_CORRECTED: (rp/0): bootflash 1 contained errors which were auto-corrected.

 

%IOSXEBOOT-4-FILESYS_ERRORS_CORRECTED: (rp/0): harddisk 1 contained errors which were auto-corrected.

 

%IOSXEBOOT-4-BOOT_ACTIVITY_LONG_TIME: (rp/0): prep_storage took: 154 seconds, expected max time 10 seconds

 

%IOSXEBOOT-4-BOOT_SRC: (rp/0): HD Boot

 

%IOSXEBOOT-4-BOOT_ACTIVITY_LONG_TIME: (rp/0): platform_specific_mount_media took: 155 seconds, expected max time 3s

 

----------------------

 

Starting IOS XE kernel dump from previous failure.

 

Expected completion time is less than 5 minutes.

 

System will automatically reboot within 20 minutes.

 

----------------------

 

 

 

Никогда еще не видел такого на asr1000(ни на rp1 ни на rp2)

 

Может кто знает от чего оно и как его поправить?

 

PS Заранее спасибо за Ваше время...