[SkyCom]

Есть 2 модуля которые стоят в Catalyst 6509-E

 

1. WS-SVC-ADM-1-K9

2. WS-SVC-AGM-1-K9

 

Первый из них грузится с незначительной ошибкой и при этом стартует.

Второй грузится с какой то серьезной ошибкой диагностики и после нескольких попыток уходит в shutdown

 

Гугл ничего не дает. Посдскажите кто знает, что это может быть и есть ли шанс починить ?

 

1 модуль

 

00:03:41: %DIAG-SP-6-RUN_MINIMUM: Module 3: Running Minimal Diagnostics...

00:03:46: %CONST_DIAG-SP-3-BOOTUP_TEST_FAIL: Module 4: TestPCLoopback failed on port(s) 1

00:03:47: %OIR-SP-6-INSCARD: Card inserted in slot 4, interfaces are now online

 

 

2 модуль

 

00:09:23: %DIAG-SP-6-RUN_MINIMUM: Module 3: Running Minimal Diagnostics...

00:09:48: %HA_EM-6-LOG: Mandatory.go_bootup.tcl: GOLD EEM TCL policy for boot up diagnostic

00:09:48: %DIAG-SP-3-MAJOR: Module 3: Online Diagnostics detected a Major Error. Please use 'show diagnostic result <target>' to see test results.

00:09:48: %CONST_DIAG-SP-3-BOOTUP_TEST_FAIL: Module 3: TestPortASICLoopback failed on port(s) 1-3

00:09:48: %CONST_DIAG-SP-3-BOOTUP_TEST_FAIL: Module 3: TestPCLoopback failed on port(s) 1-3

00:09:48: %OIR-SP-3-LC_FAILURE: Module 3 has Major online diagnostic failure, Card will be powered down. Please check bootflash diaginfo file for detailed diagnostic result.

00:09:48: SP: The PC in slot 3 is shutting down. Please wait ...

00:10:02: SP: PC shutdown completed for module 3

 

 

 

 

 

 

Данные коммутатора

 

gw#show version

Cisco IOS Software, s72033_rp Software (s72033_rp-ADVENTERPRISEK9_WAN-M), Version 12.2(33)SXI14, RELEASE SOFTWARE (fc2)

Technical Support: http://www.cisco.com/techsupport

Copyright © 1986-2014 by Cisco Systems, Inc.

Compiled Thu 04-Sep-14 00:37 by prod_rel_team

 

ROM: System Bootstrap, Version 12.2(17r)SX7, RELEASE SOFTWARE (fc1)

 

gw uptime is 53 minutes

Uptime for this control processor is 53 minutes

Time since gw switched to active is 52 minutes

System returned to ROM by reload at 00:51:11 UTC Tue Jul 25 2000 (SP by reload)

System image file is "disk0:s72033-adventerprisek9_wan-mz.122-33.SXI14.bin"

Last reload reason: Reload Command

 

 

 

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

 

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

 

If you require further assistance please contact us by sending email to

export@cisco.com.

 

cisco WS-C6509-E (R7000) processor (revision 1.3) with 458720K/65536K bytes of memory.

Processor board ID SMG1116N0KA

SR71000 CPU at 600Mhz, Implementation 0x504, Rev 1.2, 512KB L2 Cache

Last reset from s/w reset

2 Virtual Ethernet interfaces

62 Gigabit Ethernet interfaces

1917K bytes of non-volatile configuration memory.

8192K bytes of packet buffer memory.

 

65536K bytes of Flash internal SIMM (Sector size 512K).

Configuration register is 0x2102

 

 

 

 

gw#show module

Mod Ports Card Type Model Serial No.

--- ----- -------------------------------------- ------------------ -----------

1 48 CEF720 48 port 10/100/1000mb Ethernet WS-X6748-GE-TX SAL1052BYXS

3 3 Anomaly Guard Module WS-SVC-AGM-1-K9 SAD121301T8

4 3 Anomaly Detector Module WS-SVC-ADM-1-K9 SAD120101XM

5 2 Supervisor Engine 720 (Active) WS-SUP720-BASE SAL1411CQTD

8 6 Firewall Module WS-SVC-FWM-1 SAD084302UU

 

Mod MAC addresses Hw Fw Sw Status

--- ---------------------------------- ------ ------------ ------------ -------

1 001a.6cbe.60e0 to 001a.6cbe.610f 2.5 12.2(18r)S1 12.2(33)SXI1 Ok

3 001f.6c89.1a30 to 001f.6c89.1a37 3.3 7.2(1) 6.1(5) PwrDown

4 001e.beaf.df38 to 001e.beaf.df3f 3.3 7.2(1) 6.1(5) Ok

5 001f.6c77.ca78 to 001f.6c77.ca7b 4.1 8.5(4) 12.2(33)SXI1 Ok

8 0003.e471.6e32 to 0003.e471.6e39 3.0 7.2(1) 2.3(3) Ok

 

Mod Sub-Module Model Serial Hw Status

---- --------------------------- ------------------ ----------- ------- -------

1 Centralized Forwarding Card WS-F6700-CFC SAL1103EABA 2.1 Ok

5 Policy Feature Card 3 WS-F6K-PFC3A SAL1411CQW3 2.8 Ok

5 MSFC3 Daughterboard WS-SUP720 SAD083406PJ 2.8 Ok

 

Mod Online Diag Status

---- -------------------

1 Pass

3 Not Applicable

4 Minor Error

5 Pass

8 Pass

gw#

 

 

 

gw#sh mod 3

Mod Ports Card Type Model Serial No.

--- ----- -------------------------------------- ------------------ -----------

3 3 Anomaly Guard Module WS-SVC-AGM-1-K9 SAD121301T8

 

Mod MAC addresses Hw Fw Sw Status

--- ---------------------------------- ------ ------------ ------------ -------

3 001f.6c89.1a30 to 001f.6c89.1a37 3.3 7.2(1) 6.1(5) PwrDown

 

Mod Online Diag Status

---- -------------------

3 Not Applicable

 

 

gw#sh mod 4

Mod Ports Card Type Model Serial No.

--- ----- -------------------------------------- ------------------ -----------

4 3 Anomaly Detector Module WS-SVC-ADM-1-K9 SAD120101XM

 

Mod MAC addresses Hw Fw Sw Status

--- ---------------------------------- ------ ------------ ------------ -------

4 001e.beaf.df38 to 001e.beaf.df3f 3.3 7.2(1) 6.1(5) Ok

 

Mod Online Diag Status

---- -------------------

4 Minor Error

 

 

 

gw#show diagnostic result module 4

 

Current bootup diagnostic level: minimal

 

Module 4: Anomaly Detector Module SerialNo : SAD120101XM

 

Overall Diagnostic Result for Module 4 : MINOR ERROR

Diagnostic level at card bootup: minimal

 

Test results: (. = Pass, F = Fail, U = Untested)

 

1) TestPortASICLoopback:

 

Port 1 2 3

-------------

. . .

 

 

2) TestPCLoopback:

 

Port 1 2 3

-------------

F . .

 

 

3) TestNetflowInlineRewrite:

 

Port 1 2 3

-------------

U U U

 

 

4) TestSynchedFabChannel -----------> .

5) TestEobcStressPing --------------> U

6) TestFirmwareDiagStatus ----------> .

7) TestAsicSync --------------------> .

8) TestErrorCounterMonitor ---------> U

9) TestLtlFpoeMemoryConsistency ----> .

 

 

gw#show diagnostic result module 3

 

Current bootup diagnostic level: minimal

 

Module 3: Anomaly Guard Module SerialNo : SAD121301T8

 

Overall Diagnostic Result for Module 3 : UNTESTED

Diagnostic level at card bootup: minimal

 

Test results: (. = Pass, F = Fail, U = Untested)

 

1) TestPortASICLoopback:

 

Port 1 2 3

-------------

F F F

 

 

2) TestPCLoopback:

 

Port 1 2 3

-------------

F F F

 

 

3) TestNetflowInlineRewrite:

 

Port 1 2 3

-------------

U U U

 

 

4) TestSynchedFabChannel -----------> U

5) TestEobcStressPing --------------> U

6) TestFirmwareDiagStatus ----------> U

7) TestAsicSync --------------------> U

8) TestErrorCounterMonitor ---------> U

9) TestLtlFpoeMemoryConsistency ----> U

Изменено 9 июля, 2015 пользователем SkyCom

[SkyCom]

Индикация при этом на WS-SVC-AGM-1-K9 горит зеленым, когда происходит shudtown по диагнистики соответственно гаснет.

[vanr]

А у вас "работало и сломалось" или эти модули изначально так себя вели?

 

Просто даташит на AGM утверждает "On the Cisco Catalyst 6500 Series switch, IOS support is only upto IOS® Software Release 12.2(18)SXE". То есть "не новее 12.2(18)SXE", если я ничего не путаю.