tranger Posted March 17, 2015 Posted March 17, 2015 Настроил на dgs-3120sc snmp v3, для подключения использую snmpwalk - всё нормально, данные получаю Установил the dude 4, указал в настройках v3, логин, пароль - нифига. Если использовать v1 и v2, то всё норм. Никто не сталкивался с этой проблемой? Как заставить the dude работать с snmp v3? Вставить ник Quote
devi11 Posted March 26, 2015 Posted March 26, 2015 Такая же проблема. Причем, свитч ругается на "SNMP request received from 192.168.0.4 with invalid community string!". Но ведь в SNMPv3 нет Community, вместо него используется Username. Как заставить работать D-Link по SNMPv3? Вставить ник Quote
devi11 Posted March 27, 2015 Posted March 27, 2015 Конфиг свича покажите SNMP Community Table Community Name View Name Access Right -------------------------------- -------------------------------- ------------ monitoring CommunityView read_write ===================================================================================== Vacm Access Table Settings Group Name : opmanager ReadView Name : CommunityView WriteView Name : CommunityView Notify View Name : CommunityView Securiy Model : SNMPv3 Securiy Level : authPriv Group Name : monitoring ReadView Name : CommunityView WriteView Name : CommunityView Notify View Name : CommunityView Securiy Model : SNMPv1 Securiy Level : NoAuthNoPriv Group Name : monitoring ReadView Name : CommunityView WriteView Name : CommunityView Notify View Name : CommunityView Securiy Model : SNMPv2 Securiy Level : NoAuthNoPriv Group Name : monitoring ReadView Name : CommunityView WriteView Name : CommunityView Notify View Name : CommunityView Securiy Model : SNMPv3 Securiy Level : authPriv Total Entries: 4 ============================================================================================ Command: show snmp user Username Group Name VerAuthPriv -------------------------------- -------------------------------- ----------- initial initial V3 NoneNone opmanager opmanager V3 MD5 DES =============================================================================================== Command: show snmp view Vacm View Table Settings View Name Subtree View Type -------------------------------- ---------------------------------- ---------- restricted 1.3.6.1.2.1.1 Included restricted 1.3.6.1.2.1.11 Included restricted 1.3.6.1.6.3.10.2.1 Included restricted 1.3.6.1.6.3.11.2.1 Included restricted 1.3.6.1.6.3.15.1.1 Included CommunityView 1 Included CommunityView 1.3.6.1.6.3.1 Included Total Entries: 7 Вставить ник Quote
.png.5d2afa2996cc6a85d0f2c09b92dd0a28.png)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.