Перейти к содержимому
Калькуляторы

DenXkc

Пользователи
  • Публикации

    4
  • Зарегистрирован

  • Посещение

О DenXkc

  • Звание
    Абитуриент

Информация

  • Пол
    Мужчина
  1. Восстановление DLINK DWL-8500AP

    Это так давно было, я уже и не помню ))) сорри
  2. Восстановление DLINK DWL-8500AP

    Итог такой: rootfs.bin оказался архивом, распаковал и залил load -r -h 192.168.1.55 -b 0x80001000 rootfs.jffs2 и залил kernel2.bin.... и все поехало :))
  3. Восстановление DLINK DWL-8500AP

    Народ help me..... Почему не создаются разделы на убитой точке как в живой? убитая physmap flash device: 800000 at be000000 CFI: Found no Physically mapped flash device at location zero Search for id:(40 1a) interleave(1) type(1) Search for id:(40 1a) interleave(1) type(1) Search for id:(40 1a) interleave(1) type(1) Search for id:(40 60) interleave(1) type(2) Search for id:(40 60) interleave(1) type(2) Search for id:(40 60) interleave(1) type(2) JEDEC: Found no Physically mapped flash device at location zero живая physmap: Using RedBoot partition definition Creating 6 MTD partitions on "Physically mapped flash": 0x00000000-0x00050000 : "RedBoot" 0x00050000-0x000e0000 : "kernel" 0x000e0000-0x007a0000 : "rootfs" 0x007a0000-0x007b0000 : "unallocated" 0x007b0000-0x007b1000 : "RedBoot config" 0x007c0000-0x007d0000 : "FIS directory" и кто их не создает - RedBoot или Linux? Как создать? :) До заливки файлов в точку разделы создавались, контрольная сумма файлов на обоих точках совпадают. (проверял fis list -c) В самой прошивке скачаной с http://ftp.dlink.ru/pub/Switch/DWS-3000%20...b1%5d.1.0.9.tar куча файлов: kernel1.bin 567 868 kernel2.bin 576 044 rootfs.bin 4 610 378 kernel1.md5 36 kernel2.md5 36 rootfs.md5 36 model 5 board 8 version 9 Заливались только kernel1.bin и rootfs.bin, может надо еще заливать куда-то kernel2.bin Помогите что делать, куда рыть и что ломать.... :) еще живая одна точка....
  4. Прошу помощи с восстановлением точки. :( Прошивал две точки, первая прошилась идеально и работает идеально, а вот при прошивке второй возникли трудности из-за обрыва... Восстанавливал через com командами: load -r -h 192.168.1.55 -b 0x80400000 kernel1.bin fis write -f 0xBE050000 -b 0x80400000 -l 0x00090000 load -r -h 192.168.1.55 -b 0x80001000 rootfs.bin fis write -f 0xBE0E0000 -b 0x80001000 -l 0x006C0000 Лог после перезагрузки: ~+Ethernet eth0: MAC address 00:1c:f0:09:59:60 IP: 192.168.1.30/255.255.255.0, Gateway: 0.0.0.0 Default server: 192.168.1.100, DNS server IP: 0.0.0.0 RedBoot bootstrap and debug environment [ROM] Non-certified release, version v2_0 - built 16:27:39, Jul 5 2006 Copyright © 2000, 2001, 2002, Red Hat, Inc. Copyright © 2005, Devicescape Software, Inc. Copyright © 2006, LVL7 Systems, Inc. RAM: 0x80000400-0x82000000, 0x80000400-0x81fe1000 available FLASH: 0xbe000000 - 0xbe7d0000, 125 blocks of 0x00010000 bytes each. ART_FLAG = 0 == Executing boot script in 2.000 seconds - enter ^C to abort RedBoot> fis load -b 0x80400000 kernel RedBoot> exec -b 0x80500000 Now booting linux kernel: Base address 0x80500000ДCPU revision is: 00018009 Primary instruction cache 16kB, physically tagged, 4-way, linesize 16 bytes. Primary data cache 16kB, 4-way, linesize 16 bytes. Linux version 2.4.27-devicescape.3 (lvl7build@lc-rdub-07) ( /tools/devicescape/c olusa14/toolchains/mipsf-linux/bin/../libexec/gcc/mips-linux/3.4.1/collect2 --eh -frame-hdr -EB -dynamic-linker /lib/ld.so.1 -L/tools/devicescape/colusa14/toolch ains/mipsf-linux/mips-linux-uclibc/lib -L/tools/devicescape/colusa14/toolchains/ mipsf-linux/mips-linux-uclibc/lib -L/tools/devicescape/colusa14/toolchains/mipsf -linux/bin/../lib/gcc/mips-linux/3.4.1 -L/tools/devicescape/colusa14/toolchains/ mipsf-linux/bin/../lib/gcc -L/tools/devicescape/colusa14/toolchains/mipsf-linux/ bin/../lib/gcc/mips-linux/3.4.1/../../../../mips-linux/lib --dynamic-linker /lib /ld-uClibc.so.0 -rpath-link /tools/devicescape/colusa14/toolchains/mipsf-linux/m ips-linux-uclibc/lib /tools/devicescape/colusa14/toolchains/mipsf-linux/mips-lin ux-uclibc/lib/crti.o /tools/devicescape/colusa14/toolchains/mipsf-linux/mips-lin ux-uclibc/lib/crtbegin.o /tools/devicescape/colusa14/toolchains/mipsf-linux/mips -linux-uclibc/lib/crt1.o -lgcc -lgcc_eh -lc -lgcc -lgcc_eh /tooDetermined physic al RAM map: memory: 02000000 @ 00000000 (usable) NOFS reserved @ 0x80176800 On node 0 totalpages: 8192 zone(0): 8192 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: console=ttyS0,9600 root=/dev/mtdblock3 rw Using 110.000 MHz high precision timer. Calibrating delay loop... 219.54 BogoMIPS Memory: 30908k/32768k available (1160k kernel code, 1860k reserved, 84k data, 60 k init, 0k highmem) Dentry cache hash table entries: 4096 (order: 3, 32768 bytes) Inode cache hash table entries: 2048 (order: 2, 16384 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 8192 (order: 3, 32768 bytes) Checking for 'wait' instruction... available. POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd JFFS2 version 2.1. © 2001 Red Hat, Inc., designed by Axis Communications AB. Serial driver version 5.05c (2001-07-08) with no serial options enabled ttyS00 at 0xbc000003 (irq = 37) is a 16550A Software Watchdog Timer: 0.05, timer margin: 60 sec physmap flash device: 800000 at be000000 CFI: Found no Physically mapped flash device at location zero Search for id:(40 1a) interleave(1) type(1) Search for id:(40 1a) interleave(1) type(1) Search for id:(40 1a) interleave(1) type(1) Search for id:(40 60) interleave(1) type(2) Search for id:(40 60) interleave(1) type(2) Search for id:(40 60) interleave(1) type(2) JEDEC: Found no Physically mapped flash device at location zero NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 2048 bind 4096) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. Ebtables v2.0 registered NET4: Ethernet Bridge 008 for NET4.0 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> Other stuff added by David S. Miller <davem@redhat.com> VFS: Cannot open root device "mtdblock3" or 1f:03 Please append a correct "root=" boot option Kernel panic: VFS: Unable to mount root fs on 1f:03 <0>Rebooting in 2 seconds.. и лог удачно прошитой точки: ь+Ethernet eth0: MAC address 00:1c:f0:09:59:40 IP: 192.168.1.30/255.255.255.0, Gateway: 0.0.0.0 Default server: 192.168.1.100, DNS server IP: 0.0.0.0 RedBoot bootstrap and debug environment [ROM] Non-certified release, version v2_0 - built 16:27:39, Jul 5 2006 Copyright © 2000, 2001, 2002, Red Hat, Inc. Copyright © 2005, Devicescape Software, Inc. Copyright © 2006, LVL7 Systems, Inc. RAM: 0x80000400-0x82000000, 0x80000400-0x81fe1000 available FLASH: 0xbe000000 - 0xbe7d0000, 125 blocks of 0x00010000 bytes each. ART_FLAG = 0 == Executing boot script in 2.000 seconds - enter ^C to abort RedBoot> fis load -b 0x80400000 kernel RedBoot> exec -b 0x80500000 Now booting linux kernel: Base address 0x80500000 Entry 0x80400000 *МDCPU revision is: 00018009 Primary instruction cache 16kB, physically tagged, 4-way, linesize 16 bytes. Primary data cache 16kB, 4-way, linesize 16 bytes. Linux version 2.4.27-devicescape.3 (lvl7build@lc-rdub-07) ( /tools/devicescape/c olusa14/toolchains/mipsf-linux/bin/../libexec/gcc/mips-linux/3.4.1/collect2 --eh -frame-hdr -EB -dynamic-linker /lib/ld.so.1 -L/tools/devicescape/colusa14/toolch ains/mipsf-linux/mips-linux-uclibc/lib -L/tools/devicescape/colusa14/toolchains/ mipsf-linux/mips-linux-uclibc/lib -L/tools/devicescape/colusa14/toolchains/mipsf -linux/bin/../lib/gcc/mips-linux/3.4.1 -L/tools/devicescape/colusa14/toolchains/ mipsf-linux/bin/../lib/gcc -L/tools/devicescape/colusa14/toolchains/mipsf-linux/ bin/../lib/gcc/mips-linux/3.4.1/../../../../mips-linux/lib --dynamic-linker /lib /ld-uClibc.so.0 -rpath-link /tools/devicescape/colusa14/toolchains/mipsf-linux/m ips-linux-uclibc/lib /tools/devicescape/colusa14/toolchains/mipsf-linux/mips-lin ux-uclibc/lib/crti.o /tools/devicescape/colusa14/toolchains/mipsf-linux/mips-lin ux-uclibc/lib/crtbegin.o /tools/devicescape/colusa14/toolchains/mipsf-linux/mips -linux-uclibc/lib/crt1.o -lgcc -lgcc_eh -lc -lgcc -lgcc_eh /tooDetermined physic al RAM map: memory: 02000000 @ 00000000 (usable) NOFS reserved @ 0x8017b8e0 On node 0 totalpages: 8192 zone(0): 8192 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: console=ttyS0,9600 root=/dev/mtdblock3 rw Using 110.000 MHz high precision timer. Calibrating delay loop... 219.54 BogoMIPS Memory: 30888k/32768k available (1180k kernel code, 1880k reserved, 84k data, 64 k init, 0k highmem) Dentry cache hash table entries: 4096 (order: 3, 32768 bytes) Inode cache hash table entries: 2048 (order: 2, 16384 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 8192 (order: 3, 32768 bytes) Checking for 'wait' instruction... available. POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd JFFS2 version 2.1. © 2001 Red Hat, Inc., designed by Axis Communications AB. Serial driver version 5.05c (2001-07-08) with no serial options enabled ttyS00 at 0xbc000003 (irq = 37) is a 16550A Software Watchdog Timer: 0.05, timer margin: 60 sec physmap flash device: 800000 at be000000 Amd/Fujitsu Extended Query Table v1.3 at 0x0040 number of CFI chips: 1 cfi_cmdset_0002: Disabling fast programming due to code brokenness. physmap: Using RedBoot partition definition Creating 6 MTD partitions on "Physically mapped flash": 0x00000000-0x00050000 : "RedBoot" 0x00050000-0x000e0000 : "kernel" 0x000e0000-0x007a0000 : "rootfs" 0x007a0000-0x007b0000 : "unallocated" 0x007b0000-0x007b1000 : "RedBoot config" 0x007c0000-0x007d0000 : "FIS directory" NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 2048 bind 4096) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. Ebtables v2.0 registered NET4: Ethernet Bridge 008 for NET4.0 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> Other stuff added by David S. Miller <davem@redhat.com> AP MAC: 00:1c:f0:09:59:40 - Config Changed: 0 AP MAC: 00:1c:f0:09:59:40 - Config Changed: 0 VFS: Mounted root (jffs2 filesystem). Freeing unused kernel memory: 64k freed init started: BusyBox v1.00 (2Algorithmics/MIPS FPU Emulator v1.5 008.02.22-00:10+0000) multi-call binary init started: BusyBox v1.00 (2008.02.22-00:10+0000) multi-call binary Starting pid 11, console /dev/console: '/etc/init.d/rc' Mounting filesystems... DWL8500AP detected Inserting Captive Portal code: wlext_cp.oUsing /lib/modules/2.4.27-deviceap cp d ata allocated scape.3/kernel/dvap cp data allocated rivers/net/wireless/wlext_cp.o . Inserting IP tunnel code: wlext_iptunnel.oUsing /lib/modules/2.4ap tunnel alloca ted .27-devicescape.vap tunnel allocated 3/kernel/drivers/net/wireless/wlext_iptunnel.o . Using /lib/modules/2.4.27-devicescape.3/kernel/drivers/misc/button.o Inserting Wireless Datapath driver: 80211.oUsing /lib/modules/2.4.27-devicescape .3/kernel/drivers/net/wireless/80211.o Using /lib/modules/2.4.27-devicescape.3/kernel/drivers/net/wireless/rate_control .o Using /lib/modules/2.4.27-devicescape.3/kernel/drivers/net/wireless/rate_control _ath.o insmod: rate_control_engim.o: no module by that name found . Inserting Atheros Radio driver: oahu-ar5312.oUsing /lib/modules/2.4.27-devicesca pe.3/kernel/drivers/net/wireless/oahu-ar5312.o ar5211.c : Atheros AR5211 driver v0.0-jan18 soc = 87 Attach AR5212 0x1113 0x81d43044 wlan0.11: MAC rev 5.7 too old for Michael MIC hwaccel with WMM ar5211 hwaddr: 00:03:7F:BE:F0:77 ar5211 wlan0.11: Device at 0xb8000000, IRQ 2 soc = 87 Attach AR5212 0x1113 0x81d03044 wlan1.11: MAC rev 5.7 too old for Michael MIC hwaccel with WMM ar5211 hwaddr: 00:03:7F:BE:F0:79 ar5211 wlan1.11: Device at 0xb8500000, IRQ 5 . Noise floor failed detected 0 higher than thresh -54 Inserting rate_control_ath.oUsing /lib/modules/2.4.27-devicescape.3/kernel/drive rs/net/wireless/rate_control_ath.o insmod: A module named rate_control_ath already exists . Loading insert1q moduleUsing /lib/modules/2.4.27-devicescape.3/kernel/kernel/net /ebt_insert1q.o . Loading strip1q moduleUsing /lib/modules/2.4.27-devicescape.3/kernel/kernel/net/ ebt_strip1q.o . Starting dmandman: Daemonizing... . dman: Daemonized. No Hardware Watchdog Timer reset detected. dman: Starting mapd .... dman: Initialization complete. DLINK-WLAN-AP login: AP User Config Country Code: 1 - Config Changed: 0 AP Countr y Code: US - Config Changed: 0 AP MAC: 00:1c:f0:09:59:40 - Config Changed: 0 AP Se rial number: H00127665 - Config Changed: 0 dman: hostapd-all sent standalone mode response.