martin74

telnet ip-switch

именно 2-х вольтовые? Хоть ААА элементы поставьте... :)

так.. заработало на обоих машинах все правильно. Теперь вопросик маленький. Есть клиент на фре. FreeBsd 9.1.p1 64 bit. Вот mpd оттуда не может приконнектиться. Mar 28 11:21:34 jw mpd: process 64863 started, version 5.6 (root@jw.lds.net.ua 20:54 22-Feb-2013) Mar 28 11:21:34 jw mpd: [b2] Bundle: Interface ng0 created Mar 28 11:21:34 jw mpd: [L2] Link: OPEN event Mar 28 11:21:34 jw mpd: [L2] LCP: Open event Mar 28 11:21:34 jw mpd: [L2] LCP: state change Initial --> Starting Mar 28 11:21:34 jw mpd: [L2] LCP: LayerStart Mar 28 11:21:34 jw mpd: [L2] PPTP call successful Mar 28 11:21:34 jw mpd: [L2] Link: UP event Mar 28 11:21:34 jw mpd: [L2] LCP: Up event Mar 28 11:21:34 jw mpd: [L2] LCP: state change Starting --> Req-Sent Mar 28 11:21:34 jw mpd: [L2] LCP: SendConfigReq #1 Mar 28 11:21:34 jw mpd: [L2] ACFCOMP Mar 28 11:21:34 jw mpd: [L2] PROTOCOMP Mar 28 11:21:34 jw mpd: [L2] ACCMAP 0x000a0000 Mar 28 11:21:34 jw mpd: [L2] MRU 1460 Mar 28 11:21:34 jw mpd: [L2] MAGICNUM d36803c1 Mar 28 11:21:36 jw mpd: [L2] LCP: SendConfigReq #2 Mar 28 11:21:36 jw mpd: [L2] ACFCOMP Mar 28 11:21:36 jw mpd: [L2] PROTOCOMP Mar 28 11:21:36 jw mpd: [L2] ACCMAP 0x000a0000 Mar 28 11:21:36 jw mpd: [L2] MRU 1460 Mar 28 11:21:36 jw mpd: [L2] MAGICNUM d36803c1 Mar 28 11:21:36 jw mpd: [L2] LCP: rec'd Configure Reject #2 (Req-Sent) Mar 28 11:21:36 jw mpd: [L2] ACFCOMP Mar 28 11:21:36 jw mpd: [L2] PROTOCOMP Mar 28 11:21:36 jw mpd: [L2] ACCMAP 0x000a0000 Mar 28 11:21:36 jw mpd: [L2] LCP: SendConfigReq #3 Mar 28 11:21:36 jw mpd: [L2] MRU 1460 Mar 28 11:21:36 jw mpd: [L2] MAGICNUM d36803c1 Mar 28 11:21:36 jw mpd: [L2] LCP: rec'd Configure Nak #3 (Req-Sent) Mar 28 11:21:36 jw mpd: [L2] MRU 1400 Mar 28 11:21:36 jw mpd: [L2] LCP: SendConfigReq #4 Mar 28 11:21:36 jw mpd: [L2] MRU 1400 Mar 28 11:21:36 jw mpd: [L2] MAGICNUM d36803c1 Mar 28 11:21:36 jw mpd: [L2] LCP: rec'd Configure Ack #4 (Req-Sent) Mar 28 11:21:36 jw mpd: [L2] MRU 1400 Mar 28 11:21:36 jw mpd: [L2] MAGICNUM d36803c1 Mar 28 11:21:36 jw mpd: [L2] LCP: state change Req-Sent --> Ack-Rcvd Mar 28 11:21:37 jw mpd: [L2] LCP: rec'd Configure Request #1 (Ack-Rcvd) Mar 28 11:21:37 jw mpd: [L2] AUTHPROTO CHAP MSOFTv2 Mar 28 11:21:37 jw mpd: [L2] MAGICNUM 431bd7b7 Mar 28 11:21:37 jw mpd: [L2] MRU 1400 Mar 28 11:21:37 jw mpd: [L2] LCP: SendConfigAck #1 Mar 28 11:21:37 jw mpd: [L2] AUTHPROTO CHAP MSOFTv2 Mar 28 11:21:37 jw mpd: [L2] MAGICNUM 431bd7b7 Mar 28 11:21:37 jw mpd: [L2] MRU 1400 Mar 28 11:21:37 jw mpd: [L2] LCP: state change Ack-Rcvd --> Opened Mar 28 11:21:37 jw mpd: [L2] LCP: auth: peer wants CHAP, I want nothing Mar 28 11:21:37 jw mpd: [L2] LCP: LayerUp Mar 28 11:21:37 jw mpd: [L2] CHAP: rec'd CHALLENGE #1 len: 21 Mar 28 11:21:37 jw mpd: [L2] Name: "" Mar 28 11:21:37 jw mpd: [L2] CHAP: Using authname "jason" Mar 28 11:21:37 jw mpd: [L2] CHAP: sending RESPONSE #1 len: 59 Mar 28 11:21:37 jw mpd: [L2] CHAP: rec'd SUCCESS #1 len: 73 Mar 28 11:21:37 jw mpd: [L2] MESG: S=43ECAC636CA53BFB45A9EDC9B673A34999352810 M=Authentication succeeded Mar 28 11:21:37 jw mpd: [L2] LCP: authorization successful Mar 28 11:21:37 jw mpd: [L2] Link: Matched action 'bundle "B2" ""' Mar 28 11:21:37 jw mpd: [L2] Link: Join bundle "B2" Mar 28 11:21:37 jw mpd: [b2] Bundle: Status update: up 1 link, total bandwidth 64000 bps Mar 28 11:21:37 jw mpd: [b2] IPCP: Open event Mar 28 11:21:37 jw mpd: [b2] IPCP: state change Initial --> Starting Mar 28 11:21:37 jw mpd: [b2] IPCP: LayerStart Mar 28 11:21:37 jw mpd: [b2] IPCP: Up event Mar 28 11:21:37 jw mpd: [b2] IPCP: state change Starting --> Req-Sent Mar 28 11:21:37 jw mpd: [b2] IPCP: SendConfigReq #1 Mar 28 11:21:37 jw mpd: [b2] IPADDR 0.0.0.0 Mar 28 11:21:37 jw mpd: [b2] COMPPROTO VJCOMP, 16 comp. channels, no comp-cid Mar 28 11:21:37 jw mpd: [b2] IPCP: rec'd Configure Request #1 (Req-Sent) Mar 28 11:21:37 jw mpd: [b2] IPADDR 10.0.128.1 Mar 28 11:21:37 jw mpd: [b2] 10.0.128.1 is OK Mar 28 11:21:37 jw mpd: [b2] IPCP: SendConfigAck #1 Mar 28 11:21:37 jw mpd: [b2] IPADDR 10.0.128.1 Mar 28 11:21:37 jw mpd: [b2] IPCP: state change Req-Sent --> Ack-Sent Mar 28 11:21:37 jw mpd: [b2] IPCP: rec'd Configure Reject #1 (Ack-Sent) Mar 28 11:21:37 jw mpd: [b2] COMPPROTO VJCOMP, 16 comp. channels, no comp-cid Mar 28 11:21:37 jw mpd: [b2] IPCP: SendConfigReq #2 Mar 28 11:21:37 jw mpd: [b2] IPADDR 0.0.0.0 Mar 28 11:21:37 jw mpd: [b2] IPCP: rec'd Configure Nak #2 (Ack-Sent) Mar 28 11:21:37 jw mpd: [b2] IPADDR 193.192.37.74 Mar 28 11:21:37 jw mpd: [b2] 193.192.37.74 is OK Mar 28 11:21:37 jw mpd: [b2] IPCP: SendConfigReq #3 Mar 28 11:21:37 jw mpd: [b2] IPADDR 193.192.37.74 Mar 28 11:21:37 jw mpd: [b2] IPCP: rec'd Configure Ack #3 (Ack-Sent) Mar 28 11:21:37 jw mpd: [b2] IPADDR 193.192.37.74 Mar 28 11:21:37 jw mpd: [b2] IPCP: state change Ack-Sent --> Opened Mar 28 11:21:37 jw mpd: [b2] IPCP: LayerUp Mar 28 11:21:37 jw mpd: [b2] 193.192.37.74 -> 10.0.128.1 Mar 28 11:21:37 jw mpd: [b2] IFACE: Up event Mar 28 11:21:57 jw mpd: [L2] LCP: magic number is wrong: 0xb7d71b43 != 0x431bd7b7 Mar 28 11:21:57 jw mpd: [L2] LCP: received an invalid magic number Mar 28 11:21:57 jw mpd: [L2] LCP: state change Opened --> Stopping Mar 28 11:21:57 jw mpd: [L2] Link: Leave bundle "B2" Mar 28 11:21:57 jw mpd: [b2] Bundle: Status update: up 0 links, total bandwidth 9600 bps Mar 28 11:21:57 jw mpd: [b2] IPCP: Close event Mar 28 11:21:57 jw mpd: [b2] IPCP: state change Opened --> Closing Mar 28 11:21:57 jw mpd: [b2] IPCP: SendTerminateReq #4 Mar 28 11:21:57 jw mpd: [b2] IPCP: LayerDown Mar 28 11:21:57 jw mpd: [b2] IFACE: Down event Mar 28 11:21:57 jw mpd: [b2] IPCP: Down event Mar 28 11:21:57 jw mpd: [b2] IPCP: LayerFinish Mar 28 11:21:57 jw mpd: [b2] Bundle: No NCPs left. Closing links... Mar 28 11:21:57 jw mpd: [b2] IPCP: state change Closing --> Initial Mar 28 11:21:57 jw mpd: [L2] LCP: SendTerminateReq #5 Mar 28 11:21:57 jw mpd: [L2] LCP: LayerDown Mar 28 11:21:57 jw mpd: [L2] rec'd proto IP during terminate phase Mar 28 11:21:57 jw mpd: [L2] rec'd proto IP during terminate phase Mar 28 11:21:57 jw mpd: [L2] LCP: rec'd Terminate Ack #5 (Stopping) Mar 28 11:21:57 jw mpd: [L2] LCP: state change Stopping --> Stopped Mar 28 11:21:57 jw mpd: [L2] LCP: LayerFinish лечится check_magic=off или как то так (по словам фряшника).

[root@vpn29 ppp]# ethtool -k eth0 Features for eth0: rx-checksumming: on tx-checksumming: on scatter-gather: on tcp-segmentation-offload: off udp-fragmentation-offload: off generic-segmentation-offload: off generic-receive-offload: off large-receive-offload: off rx-vlan-offload: on tx-vlan-offload: on ntuple-filters: off receive-hashing: on [root@vpn29 ppp]# ethtool -k eth1 Features for eth1: rx-checksumming: on tx-checksumming: on scatter-gather: on tcp-segmentation-offload: off udp-fragmentation-offload: off generic-segmentation-offload: off generic-receive-offload: off large-receive-offload: off rx-vlan-offload: on tx-vlan-offload: on ntuple-filters: off receive-hashing: on mail.ru не открывается хм... пересобрал еще раз accel - заработало. Прошу прощения, пошел ка я все перепроверю...

убирал файервол совсем. пофиг. Вместо ната - сделал выдачу тестовому абоненту реалки. Не меняется. На амд стоит вот это - двухпортовка интеловская, драйвер igb. 01:00.0 Ethernet controller: Intel Corporation 82576 Gigabit Network Connection (rev 01) 01:00.1 Ethernet controller: Intel Corporation 82576 Gigabit Network Connection (rev 01) вот ее настройки [root@vpn29 ppp]# ethtool -k eth0 Features for eth0: rx-checksumming: on tx-checksumming: on scatter-gather: on tcp-segmentation-offload: on udp-fragmentation-offload: off generic-segmentation-offload: on generic-receive-offload: on large-receive-offload: off rx-vlan-offload: on tx-vlan-offload: on ntuple-filters: off receive-hashing: on на интеле стоит 4-хпортовка старая, драйвер e1000e. 08:00.0 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (rev 06) 08:00.1 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (rev 06) 09:00.0 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (rev 06) 09:00.1 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (rev 06) вот ее настройки [root@vpn30 ~]# ethtool -k eth0 Features for eth0: rx-checksumming: on tx-checksumming: on scatter-gather: on tcp-segmentation-offload: on udp-fragmentation-offload: off generic-segmentation-offload: on generic-receive-offload: off large-receive-offload: off rx-vlan-offload: on tx-vlan-offload: on ntuple-filters: off receive-hashing: off Это даже еще не тюнил. Клиент - один. На АМД - не открывается mail.ru, открывается ya.ru, speedtest.net... Скорость закачки большого файла с mirrors.yandex.ru - 300к На интеле - работает все прекрасно, скорость закачки - до 5-6 МБ...

а скажите пожалуйста, куда писать? ;)

Теперь есть такая непонятка. Есть две машины с accel-pppd. На обоих centos 6.4 64bit. Одинаковые конфиги, одинаковые скрипты подъема шейпера, одинаковый фаервол. Одна машина: model name : Intel® Core™ i7 CPU X 980 @ 3.33GHz Вторая машина: model name : AMD Opteron™ Processor 6274 На интеле все работает правильно - соединение устанавливается, шейпер конфигурится, инет работает на правильной скорости. На АМД - визуально шейпер такой же, а вот скорость... Вообще похоже на то, что mss на АМД не работает. Но правила присутствуют на обоих машинах, одинаковые. Причем, когда на АМД развернул образ с 0.8.5 accel-pptpd - там с теми же скриптами все работает корректно. В чем может быть проблема?

разобрался. Поправь парсер конфигов - если после ключевых слов есть пробелы - может не понять. Я конфиг получил методом копирования с соседнего сервера, где под другой платформой тестил. И строки добились пробелами. Удалил пробелы - заработало корректно.

расстоянием ;)

Да я на самом деле за. Вот только правильно тут товарищи уточняют насчет Магадана... Россия говорят большая страна...

Повторю вопрос - кому оно надо? и зачем?

А кому оно надо?

[root@vpn30 ~]# cat /etc/accel-ppp.conf [modules] #path=/usr/local/lib/accel-ppp log_file #log_syslog #log_tcp #log_pgsql pptp #l2tp #pppoe auth_mschap_v2 auth_mschap_v1 auth_chap_md5 #auth_pap radius #ippool sigchld pppd_compat #shaper #shaper_tbf (obsolete) #chap-secrets #net-snmp #logwtmp #connlimit #ipv6_nd #ipv6_dhcp #ipv6pool [core] log-error=/var/log/accel-ppp/core.log thread-count=4 [ppp] verbose=5 min-mtu=1280 mtu=1400 mru=1400 ccp=1 #sid-case=upper check-ip=0 #single-session=replace mppe=allow ipv4=require ipv6=deny #ipv6-intf-id=0:0:0:1 #ipv6-peer-intf-id=0:0:0:2 #ipv6-accept-peer-intf-id=1 lcp-echo-interval=20 lcp-echo-failure=3 lcp-echo-timeout=120 #unit-cache=1000 [auth] #any-login=0 #noauth=0 [pptp] echo-interval=30 mppe=allow #ip-pool=pool1 verbose=5 [pppoe] #interface=eth0 #interface=eth1,padi-limit=1000 #ac-name=xxx #service-name=yyy #pado-delay=0 #pado-delay=0,100:100,200:200,-1:500 #ifname-in-sid=called-sid #tr101=1 #padi-limit=0 #mppe=allow #ip-pool=pool2 #verbose=1 [l2tp] #dictionary=/usr/local/share/accel-ppp/l2tp/dictionary #hello-interval=60 #timeout=60 #rtimeout=5 #retransmit=5 #host-name=accel-ppp #dir300_quirk=0 #secret= #mppe=allow #ip-pool=pool3 verbose=1 [dns] dns1=10.0.0.2 dns2=10.0.0.17 [wins] #wins1=172.16.0.1 #wins2=172.16.1.1 [radius] dictionary=/usr/local/share/accel-ppp/radius/dictionary nas-identifier=accel-ppp nas-ip-address=10.0.5.30 gw-ip-address=10.0.128.1 #auth-server=127.0.0.1:1812,testing123 (obsolete) #acct-server=127.0.0.1:1813,testing123 (obsolete) #server=127.0.0.1,testing123 (obsolete) server=10.0.0.14,*********,auth-port=1812,acct-port=1813,req-limit=0,fail-time=0 #dae-server=127.0.0.1:3799,testing123 verbose=5 #timeout=3 #max-try=3 #acct-timeout=120 #acct-delay-time=0 [client-ip-range] disable [ip-pool] #gw-ip-address=192.168.0.1 #vendor=Cisco #attr=Cisco-AVPair #attr=Framed-Pool #192.168.0.2-255 #192.168.1.1-255,pool1 #192.168.2.1-255,pool2 #192.168.3.1-255,pool3 #192.168.4.0/24 [log] log-file=/var/log/accel-ppp/accel-ppp.log log-emerg=/var/log/accel-ppp/emerg.log log-fail-file=/var/log/accel-ppp/auth-fail.log log-debug=/var/log/accel-ppp/debug.log #syslog=accel-pppd,daemon #log-tcp=127.0.0.1:3000 copy=1 #color=1 #per-user-dir=per_user #per-session-dir=per_session #per-session=1 level=5 [log-pgsql] conninfo=user=log log-table=log [pppd-compat] #ip-pre-up=/etc/ppp/ip-pre-up ip-up=/etc/ppp/ip-up ip-down=/etc/ppp/ip-down ip-change=/etc/ppp/ip-change radattr-prefix=/var/run/radattr verbose=5 [chap-secrets] #gw-ip-address=192.168.100.1 #chap-secrets=/etc/ppp/chap-secrets #encrypted=0 #username-hash=md5 [shaper] #attr=Filter-Id #down-burst-factor=0.1 #up-burst-factor=1.0 #latency=50 #mpu=0 #r2q=10 #quantum=1500 #cburst=1534 #ifb=ifb0 #up-limiter=police #down-limiter=tbf #leaf-qdisc=sfq perturb 10 #verbose=1 #tbf is obsolete, use shaper module #[tbf] #attr=Filter-Id #down-burst-factor=0.1 #up-burst-factor=1.0 #latency=50 [cli] telnet=127.0.0.1:2000 tcp=127.0.0.1:2001 password=123 [snmp] master=0 agent-name=accel-ppp [connlimit] #limit=10/min #burst=3 #timeout=60 [ipv6-pool] #fc00:0:1::/48,64 #delegate=fc00:1::/36,48 [ipv6-dns] #fc00:1::1 #fc00:1::2 #fc00:1::3 #dnssl=suffix1.local.net #dnssl=suffix2.local.net. [ipv6-dhcp] #verbose=1 #pref-lifetime=604800 #valid-lifetime=2592000 #route-via-gw=1 [root@vpn30 ~]#

Abram, эти атрибуты я сам определил в словаре радиуса и обрабатываю ip-up скриптами. Так сложилось исторически ;) вот лог [2013-03-27 09:13:35]: info: pptp: new connection from 10.0.20.5 [2013-03-27 09:13:35]: info: : recv [PPTP Start-Ctrl-Conn-Request <Version 1> <Framing 1> <Bearer 1> <Max-Chan 0>] [2013-03-27 09:13:35]: info: : send [PPTP Start-Ctrl-Conn-Reply <Version 1> <Result 1> <Error 0> <Framing 3> <Bearer 3> <Max-Chan 1>] [2013-03-27 09:13:35]: info: : recv [PPTP Outgoing-Call-Request <Call-ID 866e> <Call-Serial 38> <Min-BPS 300> <Max-BPS 100000000> <Bearer 3> <Framing 3> <Window-Size 64> <Delay 0>] [2013-03-27 09:13:35]: info: : send [PPTP Outgoing-Call-Reply <Call-ID 3> <Peer-Call-ID 866e> <Result 1> <Error 0> <Cause 0> <Speed 100000000> <Window-Size 64> <Delay 0> <Channel 0>] [2013-03-27 09:13:35]: info: ppp0: connect: ppp0 <--> pptp(10.0.20.5) [2013-03-27 09:13:35]: debug: ppp0: lcp_layer_init [2013-03-27 09:13:35]: debug: ppp0: auth_layer_init [2013-03-27 09:13:35]: debug: ppp0: ccp_layer_init [2013-03-27 09:13:35]: debug: ppp0: ipcp_layer_init [2013-03-27 09:13:35]: debug: ppp0: ipv6cp_layer_init [2013-03-27 09:13:35]: debug: ppp0: ppp established [2013-03-27 09:13:35]: debug: ppp0: lcp_layer_start [2013-03-27 09:13:35]: info: ppp0: send [LCP ConfReq id=1 <auth MSCHAP-v2> <magic 257130a3> <mru 1400>] [2013-03-27 09:13:35]: info: ppp0: recv [PPTP Set-Link-Info] [2013-03-27 09:13:37]: info: ppp0: recv [LCP ConfReq id=1 <mru 1400> <magic 7a7b6bbd> <pcomp> <accomp> < d 3 6 > < 11 4 6 4e > < 13 17 1 7c 93 16 6b 33 4f 45 da 90 1c 80 7c 4 21 ab 22 0 0 0 1b >] [2013-03-27 09:13:37]: info: ppp0: send [LCP ConfRej id=1 <pcomp> <accomp> < d 3 6 > < 11 4 6 4e > < 13 17 1 7c 93 16 6b 33 4f 45 da 90 1c 80 7c 4 21 ab 22 0 0 0 1b >] [2013-03-27 09:13:37]: info: ppp0: recv [LCP ConfReq id=2 <mru 1400> <magic 7a7b6bbd>] [2013-03-27 09:13:37]: info: ppp0: send [LCP ConfAck id=2 ] [2013-03-27 09:13:38]: debug: ppp0: fsm timeout [2013-03-27 09:13:38]: info: ppp0: send [LCP ConfReq id=1 <auth MSCHAP-v2> <magic 257130a3> <mru 1400>] [2013-03-27 09:13:38]: info: ppp0: recv [LCP ConfAck id=1 <auth MSCHAP-v2> <magic 257130a3> <mru 1400>] [2013-03-27 09:13:38]: debug: ppp0: lcp_layer_started [2013-03-27 09:13:38]: debug: ppp0: auth_layer_start [2013-03-27 09:13:38]: info: ppp0: send [MSCHAP-v2 Challenge id=1 <272a7b1fd1c18c28ac12e386686a75>] [2013-03-27 09:13:38]: info: ppp0: recv [LCP Ident id=3 <MSRASV5.20>] [2013-03-27 09:13:38]: info: ppp0: recv [LCP Ident id=4 <MSRAS-0-TERM>] [2013-03-27 09:13:38]: info: ppp0: recv [LCP Ident id=5 <�d�Y��G�vxbt5>] [2013-03-27 09:13:38]: info: ppp0: recv [PPTP Set-Link-Info] [2013-03-27 09:13:38]: info: ppp0: recv [MSCHAP-v2 Response id=1 <82ba77fc893c2af11d873d238bae8bed>, <86918ba93a45ed67d87259ddf4b5d4b868565f22a0f742d2>, F=0, name=testadsl2] [2013-03-27 09:13:38]: info: ppp0: send [RADIUS(1) Access-Request id=1 <User-Name "testadsl2"> <NAS-Identifier "accel-ppp "> <NAS-IP-Address 10.0.5.30> <NAS-Port 0> <NAS-Port-Type Virtual> <Service-Type Framed-User> <Framed-Protocol PPP> <Calling-Station-Id "10.0.20.5"> <Called-Station-Id "10.0.5.30"><Microsoft MS-CHAP-Challenge ><Microsoft MS-CHAP2-Response >] [2013-03-27 09:13:38]: info: ppp0: recv [RADIUS(1) Access-Accept id=1 <Framed-IP-Address 10.2.46.116> <Framed-IP-Netmask 255.255.255.255> <PPPD-Concurent-Sessions 200> <PPPD-Upstream-Speed-Limit "102400|0:0|0"> <PPPD-Downstream-Speed-Limit "102400|0:0|0"> <Login-IP-Host 255.255.255.255> <PPPD-Proxy 0><Microsoft MS-CHAP2-Success ><Microsoft MS-MPPE-Recv-Key ><Microsoft MS-MPPE-Send-Key ><Microsoft MS-MPPE-Encryption-Policy 1><Microsoft MS-MPPE-Encryption-Type 6>] [2013-03-27 09:13:38]: info: ppp0: send [MSCHAP-v2 Success id=1 "S=FBD28377DB86CDFF0E7A51E328A49F396B549D96 M=Authentication succeeded"] [2013-03-27 09:13:38]: debug: ppp0: auth_layer_started [2013-03-27 09:13:38]: debug: ppp0: ccp_layer_start [2013-03-27 09:13:38]: debug: ppp0: ipcp_layer_start [2013-03-27 09:13:38]: debug: ppp0: ipv6cp_layer_start [2013-03-27 09:13:38]: info: ppp0: testadsl2: authentication succeeded [2013-03-27 09:13:38]: info: ppp0: recv [CCP ConfReq id=6 <mppe +H -M -S -L -D +C>] [2013-03-27 09:13:38]: info: ppp0: send [CCP ConfReq id=1 <mppe +H -M +S -L -D -C>] [2013-03-27 09:13:38]: info: ppp0: send [CCP ConfNak id=6 <mppe +H -M +S -L -D -C>] [2013-03-27 09:13:38]: warn: ppp0: IPCP: discarding packet [2013-03-27 09:13:38]: info: ppp0: send [LCP ProtoRej id=3 <8021>] [2013-03-27 09:13:38]: info: ppp0: recv [CCP ConfAck id=1 <mppe +H -M +S -L -D -C>] [2013-03-27 09:13:38]: info: ppp0: recv [CCP ConfReq id=8 <mppe +H -M +S -L -D -C> (mppe enabled)] [2013-03-27 09:13:38]: info: ppp0: send [CCP ConfAck id=8] [2013-03-27 09:13:38]: debug: ppp0: ccp_layer_started [2013-03-27 09:13:38]: info: ppp0: recv [PPTP Set-Link-Info] [2013-03-27 09:13:38]: info: ppp0: recv [LCP TermReq id=9] [2013-03-27 09:13:38]: info: ppp0: send [LCP TermAck id=9] [2013-03-27 09:13:38]: debug: ppp0: terminate [2013-03-27 09:13:38]: debug: ppp0: lcp_layer_finish [2013-03-27 09:13:38]: debug: ppp0: auth_layer_finish [2013-03-27 09:13:38]: debug: ppp0: auth_layer_finished [2013-03-27 09:13:38]: debug: ppp0: ccp_layer_finish [2013-03-27 09:13:38]: debug: ppp0: ccp_layer_finished [2013-03-27 09:13:38]: debug: ppp0: ipcp_layer_finish [2013-03-27 09:13:38]: debug: ppp0: ipcp_layer_finished [2013-03-27 09:13:38]: debug: ppp0: ipv6cp_layer_finish [2013-03-27 09:13:38]: debug: ppp0: ipv6cp_layer_finished [2013-03-27 09:13:38]: info: ppp0: recv [PPTP Call-Clear-Request <Call-ID 866e>] [2013-03-27 09:13:38]: debug: ppp0: lcp_layer_free [2013-03-27 09:13:38]: debug: ppp0: auth_layer_free [2013-03-27 09:13:38]: debug: ppp0: ccp_layer_free [2013-03-27 09:13:38]: debug: ppp0: ipcp_layer_free [2013-03-27 09:13:38]: debug: ppp0: ipv6cp_layer_free [2013-03-27 09:13:38]: debug: ppp0: ppp destablished [2013-03-27 09:13:38]: error: libnetlink: RTNETLINK answers: No such device [2013-03-27 09:13:38]: warn: ppp0: failed to get interface statistics [2013-03-27 09:13:38]: info: ppp0: send [PPTP Call-Disconnect-Notify <Call-ID 6e86> <Result 4> <Error 0> <Cause 0>] [2013-03-27 09:13:39]: info: ppp0: recv [PPTP Stop-Ctrl-Conn-Request <Reason 1>] [2013-03-27 09:13:39]: info: ppp0: send [PPTP Stop-Ctrl-Conn-Reply <Result 1> <Error 0>] [2013-03-27 09:13:39]: debug: ppp0: pptp: disconnect [2013-03-27 09:13:39]: info: ppp0: disconnected

При переезде (и правильно настроенных таймаутах на heartbeat) - мускул увидит какие то тормоза с диском, а потом все будет работать дальше...

[root@vpn30 accel-ppp]# lsmod | grep pptp pptp 16502 0 pppox 2696 1 pptp ppp_generic 25059 3 ppp_mppe,pptp,pppox в том то и дело ;) и depmod делал, и перегружал модуль... И сервер перегрузил. Что не так? ;)

Эм. И куда меня теперь послали? [2013-03-26 15:10:13]: msg: accel-ppp version 751477d72cb49656cc6d7d35d91b21da3be3314e [2013-03-26 15:10:37]: info: ppp0: connect: ppp0 <--> pptp(10.0.20.5) [2013-03-26 15:10:40]: info: ppp0: send [RADIUS(1) Access-Request id=1 <User-Name "testadsl2"> <NAS-Identifier "accel-ppp "> <NAS-IP-Address 10.0.5.30> <NAS-Port 0> <NAS-Port-Type Virtual> <Service-Type Framed-User> <Framed-Protocol PPP> <Calling-Station-Id "10.0.20.5"> <Called-Station-Id "10.0.5.30"><Microsoft MS-CHAP-Challenge ><Microsoft MS-CHAP2-Response >] [2013-03-26 15:10:40]: info: ppp0: recv [RADIUS(1) Access-Accept id=1 <Framed-IP-Address 10.2.46.116> <Framed-IP-Netmask 255.255.255.255> <PPPD-Concurent-Sessions 200> <PPPD-Upstream-Speed-Limit "102400|0:0|0"> <PPPD-Downstream-Speed-Limit "102400|0:0|0"> <Login-IP-Host 255.255.255.255> <PPPD-Proxy 0><Microsoft MS-CHAP2-Success ><Microsoft MS-MPPE-Recv-Key ><Microsoft MS-MPPE-Send-Key ><Microsoft MS-MPPE-Encryption-Policy 1><Microsoft MS-MPPE-Encryption-Type 6>] [2013-03-26 15:10:40]: info: ppp0: testadsl2: authentication succeeded [2013-03-26 15:10:40]: warn: ppp0: IPCP: discarding packet [2013-03-26 15:10:40]: error: libnetlink: RTNETLINK answers: No such device [2013-03-26 15:10:40]: warn: ppp0: failed to get interface statistics [2013-03-26 15:10:41]: info: ppp0: disconnected

понял, спасибо

прошу прощения, а я что написал?

cmake -DBUILD_DRIVER=TRUE -DKDIR=/usr/src/linux -DCMAKE_INSTALL_PREFIX=/usr/local -DCMAKE_BUILD_TYPE=Release -DLOG_PGSQL=FALSE -DSHAPER=FALSE -DRADIUS=TRUE -DNETSNMP=TRUE [root@vpn30 accel-ppp-code]# ls -la /usr/src/ total 16 drwxr-xr-x. 4 root root 4096 Mar 26 11:18 . drwxr-xr-x. 13 root root 4096 Jul 27 2010 .. drwxr-xr-x. 2 root root 4096 Sep 23 2011 debug drwxr-xr-x. 3 root root 4096 Mar 26 11:16 kernels lrwxrwxrwx 1 root root 42 Mar 26 11:18 linux -> /usr/src/kernels/2.6.32-358.2.1.el6.x86_64

[root@vpn30 accel-ppp-code]# uname -a Linux vpn30.lds.net.ua 2.6.32-358.2.1.el6.x86_64 #1 SMP Wed Mar 13 00:26:49 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux [root@vpn30 accel-ppp-code]# make [ 8%] Built target triton [ 43%] Built target accel-pppd [ 52%] Built target radius [ 53%] Built target pptp [ 58%] Built target pppoe [ 61%] Built target l2tp [ 66%] Built target ipoe [ 67%] Built target auth_chap_md5 [ 68%] Built target auth_mschap_v1 [ 69%] Built target auth_mschap_v2 [ 70%] Built target auth_pap [ 71%] Built target log_file [ 72%] Built target log_syslog [ 73%] Built target log_tcp [ 74%] Built target chap-secrets [ 75%] Built target connlimit [ 76%] Built target ippool [ 77%] Built target ipv6pool [ 78%] Built target logwtmp [ 79%] Built target sigchld [ 80%] Built target pppd_compat [ 94%] Built target net-snmp [ 96%] Built target ipv6_dhcp [ 97%] Built target ipv6_nd [ 98%] Built target accel-cmd [100%] Generating driver/pptp.ko [100%] Built target pptp_drv [root@vpn30 accel-ppp-code]# И все. И нету его нигде. Я pptp.ko найти не могу после этого

Никаких проблем не было. Хранилищ собрано 4, работают уже почти два года... И винты вылетали, и блоки питания горели, и контроллеры рейдов накрывались.. Работаем ;) Разве что у меня на каждой ноде 5-й рейд, но это уже дело вкуса по моему..

heartbeat не дописал ;) у меня так сервера хранения для esx собраны - две машины, drbd+heartbeat и nfs...

Имеем centos 6.4 accel-ppp взяли из гита. Модуль pptp упорно не собирается. Что я делаю неправильно?

drbd + nfs ?