Добрый день, прошу помощи (совета) с решением проблемы.
есть маршрутизатор 2801с модулями:
NAME: "VIC 0", DESCR: "2nd generation two port FXS voice interface daughtercard"
PID: VIC2-2FXS , VID: V01 , SN: FOC10483P0W
NAME: "PVDM 0", DESCR: "PVDMII DSP SIMM with one DSP with half channel capcity"
PID: PVDM2-8 , VID: V01 , SN: FOC10471Q4W
к VIC2-2FXS будет подключена телефонная линия. Которая должна будет стучаться к Атс Siemens Hipath4000 на ip плату STMI2.
Возникла ситуация, когда звонок происходит со стороны АТС Сименс все нормально, когда звонок со стороны маршрутизатора 2801 то при поднятии трубки происходит разрыв соединения, есть ли варианты в чем может быть причина. Спасибо.
Ранинг:
boot system flash c2801-ipvoice-mz.124-12.T.bin
aaa new-model
!
!
no ip source-route
ip gratuitous-arps
!
ip multicast-routing
!
voice-card 0
!
voice service pots
!
voice service voip
sip
!
voice class codec 1
codec preference 1 g723r63
codec preference 2 g711alaw
codec preference 3 g711ulaw
!
class-map match-all inspection_default
!
!
policy-map global_policy
class inspection_default
!
!
!
interface FastEthernet0/1
description inside
no ip address
speed 100
full-duplex
!
interface FastEthernet0/1.111
encapsulation dot1Q 111
ip address 172.26.95.133 255.255.255.0
voice-port 0/0/0
cptone RU
!
voice-port 0/0/1
cptone RU
dial-peer voice 1000 voip
destination-pattern ....
session protocol sipv2
session target ipv4:172.26.95.4
session transport udp
!
dial-peer voice 498396 pots
destination-pattern 498396
port 0/0/0
!
sip-ua
registrar ipv4:172.26.95.4 expires 3600
sip-server ipv4:172.26.95.4