Перейти к содержимому
Калькуляторы

Cisco 2950 реальная скорость throughput

Добрый вечер

Есть железка на доступе старая WS-C2950G-48-EI, гигабитный аплинк загружается максимум на 300мбит.

Абоны подключенные в 100мегабитные порты жалуются в часы пик, что входящая скорость низкая, а исходящая нормальная.

Проц загружен на 16-20%. Сколько реально может прокачать сей девайс через себя?

Switch14#sh inter gi0/1
GigabitEthernet0/1 is up, line protocol is up (connected)
  Hardware is Gigabit Ethernet, address is 000a.8a6b.2ab1 (bia 000a.8a6b.2ab1)
  MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec,
     reliability 255/255, txload 2/255, rxload 34/255
  Encapsulation ARPA, loopback not set
  Keepalive set (10 sec)
  Full-duplex, 1000Mb/s, media type is LX
  input flow-control is off, output flow-control is off
  ARP type: ARPA, ARP Timeout 04:00:00
  Last input 00:00:00, output 00:00:00, output hang never
  Last clearing of "show interface" counters 09:32:57
  Input queue: 0/75/1/0 (size/max/drops/flushes); Total output drops: 0
  Queueing strategy: fifo
  Output queue: 0/40 (size/max)
  5 minute input rate 136642000 bits/sec, 13901 packets/sec
  5 minute output rate 11304000 bits/sec, 7979 packets/sec
     749313531 packets input, 1394711600 bytes, 40151 no buffer
     Received 1025699 broadcasts (853746 multicast)
     0 runts, 0 giants, 0 throttles
     0 input errors, 0 CRC, 0 frame, 0 overrun, 40151 ignored
     0 watchdog, 853757 multicast, 0 pause input
     0 input packets with dribble condition detected
     470205280 packets output, 3337696221 bytes, 0 underruns
     0 output errors, 0 collisions, 0 interface resets
     0 babbles, 0 late collision, 0 deferred
     0 lost carrier, 0 no carrier, 0 PAUSE output
     0 output buffer failures, 0 output buffers swapped out


Switch14#sh inter fa0/43
FastEthernet0/43 is up, line protocol is up (connected)
  Hardware is Fast Ethernet, address is 000a.8a6b.2aab (bia 000a.8a6b.2aab)
  MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec,
     reliability 255/255, txload 26/255, rxload 1/255
  Encapsulation ARPA, loopback not set
  Keepalive set (10 sec)
  Full-duplex, 100Mb/s, media type is 100BaseTX
  input flow-control is unsupported output flow-control is unsupported
  ARP type: ARPA, ARP Timeout 04:00:00
  Last input 00:04:38, output 00:00:00, output hang never
  Last clearing of "show interface" counters never
  Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
  Queueing strategy: fifo
  Output queue: 0/40 (size/max)
  5 minute input rate 722000 bits/sec, 808 packets/sec
  5 minute output rate 10412000 bits/sec, 1147 packets/sec
     3881472251 packets input, 3380256 bytes, 429 no buffer
     Received 1329739 broadcasts (1073954 multicast)
     0 runts, 0 giants, 0 throttles
     0 input errors, 0 CRC, 0 frame, 0 overrun, 429 ignored
     0 watchdog, 1073954 multicast, 0 pause input
     0 input packets with dribble condition detected
     981075061 packets output, 1084723942 bytes, 0 underruns
     0 output errors, 0 collisions, 3 interface resets
     0 babbles, 0 late collision, 0 deferred
     0 lost carrier, 0 no carrier, 0 PAUSE output
     0 output buffer failures, 0 output buffers swapped out

 

 

Поделиться сообщением


Ссылка на сообщение
Поделиться на других сайтах

25 минут назад, Macro сказал:

Сколько реально может прокачать сей девайс через себя?

Cisco rates the switch at 8.8-Gbps throughput at the backplane and a maximum forwarding bandwidth of 4.4 Gbps

Поделиться сообщением


Ссылка на сообщение
Поделиться на других сайтах

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Гость
Ответить в тему...

×   Вставлено в виде отформатированного текста.   Вставить в виде обычного текста

  Разрешено не более 75 смайлов.

×   Ваша ссылка была автоматически встроена.   Отобразить как ссылку

×   Ваш предыдущий контент был восстановлен.   Очистить редактор

×   Вы не можете вставить изображения напрямую. Загрузите или вставьте изображения по ссылке.